• Title/Summary/Keyword: 공급비율

Search Result 776, Processing Time 0.028 seconds

Economic Impacts of Renewable Portfolio Standard on Domestic Industry (신재생에너지 의무할당제의 국내산업에 대한 파급효과)

  • Kim, Hyun Jae;Cho, Gyeong Lyeob
    • Environmental and Resource Economics Review
    • /
    • v.19 no.4
    • /
    • pp.805-828
    • /
    • 2010
  • Korea also plans to introduce Renewable Portfolio Standard (RPS) for strengthening market functions after 2012 as United States and several members of EU countries did. Through the introduction of RPS, it requires energy industry to supply new and renewable energy at fixed rate. Therefore, it will contribute to the distribution of new and renewable energy. This paper analyzed the economic effect of the introduction of RPS using CGE. The summary of the paper on the analysis of the economic effect based on endogenous growth theory under imperfect market competition by using CGE is as follows; Since RPS possibly regulates the amount of new and renewable energy, it can achieve the target amount of new and renewable energy without fail. As achieving the target amount accurately, the distribution of more advanced skills can be expected. However, GDP reduction can occur because investment cost increases due to the requirement of new and renewable energy supply. Therefore, in the long run, it is appropriate to introduce RPS because it contributes to the distribution of new and renewable energy and can be utilized as a new growth engine to encourage economic growth.

  • PDF

Modelling Study on Sustainable Resources Management System Using Material Flow Analysis(MFA) in Korea (물질흐름분석을 이용한 국내 지속가능한 자원관리 시스템 모형 연구)

  • Kim, Yu-Jeong;Kim, Seong-Yong;Heo, Eun-Nyeong
    • Economic and Environmental Geology
    • /
    • v.41 no.2
    • /
    • pp.253-265
    • /
    • 2008
  • Sustainable resource management(SRM) is regarded as the core strategy to achieve Dematerialisation and Decoupling of economic growth from the use of natural resources and environmental degradation. This paper presents status SRM policy and research in worldwide, and analyzes decoupling of economic activity from energy consumption of domestic manufacturing, using decoupling factor. Also This paper suggests methodologies and strategies of SRM in Korea. SRM is established through various analysis and survey as following; forecasting of resource demand, material flow analysis and value chain analysis, resource market structure analysis. Through these analysis, we can obtain hot-spot and solution of environmental burden, recycling market management, recycling technology and best-optimal supply rate of primary and secondary resource. In Korea, resource management system must be linked with national and regional material flow analysis, and it is necessary to make SRM-law of national dimension for effective run of sustainable resource management system.

Analysis on the Difference in Efficiencies between Environmental Factors of Regional Public Hospitals in Korea using Super-Efficiency Model (초효율성 모형을 이용한 지방의료원의 환경요인별 효율성 차이 분석)

  • Yang, Dong-Hyun
    • The Journal of the Korea Contents Association
    • /
    • v.12 no.7
    • /
    • pp.284-294
    • /
    • 2012
  • In the study, we estimate efficiencies using CCR model of DEA, Super efficiency(AP) model, and super-SBM model with the data of 32 regional public hospitals in Korea from 205 to 2009. With Wilcoxon-Mann-Whitney statistics, we analyze efficiency differences for environmental factors(regions, type of hospital, type of operations, type of education training, relative importance of madicaids) among regional public hospitals. The results can be summarized as follows. Firstly, technical inefficiencies of regional public hospitals range from 15% to 17% in CCR model, 13% to 15% in AP model, 7% to 12.6% in SuperSBM model. Second, we confirm that environmental factors of hospitals cause different inefficiencies among them. The implication of this study is that policy and institutional change may need to improve the efficiencies along with internal managerial reform.

파일럿 시스템 규모의 환경기체조성용 가스 혼합기 개발

  • Lee, Hyun-Dong;Yoon, Hong-Sun;Lee, Won-Ok;Jung, Hoon
    • Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
    • /
    • 2003.10a
    • /
    • pp.193-193
    • /
    • 2003
  • 신선농산물의 환경기체조절 저장 연구 및 호흡속도 측정연구에 필요한 설비중의 하나가 기체 발생기, 기체 실린더 및 이를 제어할 수 있는 가스분석기 이다. 현재는 질소, 산소, 이산화탄소 실린더를 이용하여 기체를 공급하고 기체분석기에서 저장고내의 농도를 측정하여 소정의 기체조성으로 유지하는 방법을 많이 사용하고 있으나 고가의 기체분석기를 구비하고 있어야 하는 점과 각 기체 실린더의 유지비용이 발생하며 자동으로 제어하기 위해서는 고가의 설비가 필요한 단점이 있다. 본 연구에서는 가격이 저렴하면서 혼합기체를 안정적으로 공급할 수 있어 파일럿 시스템의 환경기체조절 저장연구에 사용될 수 있는 장치를 개발하였다. 환경기체조성을 위한 가스 혼합장치의 조작은 시판되는 $N_2$, $O_2$, $CO_2$압축 실린더 또는 질소 발생기 및 공기압축기와 연계하여 사용할 수 있도록 설계하였다. 개발된 혼합기의 작동원리는 압력 조절기를 통해서 일정압력 유지시킨 후 정밀 압력 조절기 (IR 2010, SMC Co., Japan)에서 정압을 유지하고 metering valve(SS-SS2, Swagelok Co., U.S.A)를 이용하여 각 기체의 유량을 소정의 비율로 제어할 수 있도록 하였다. 각각의 기체는 metering valve에서 조절된 유량의 비로 기체 혼합셀에서 섞이게되고 일정 농도의 혼합기체를 얻을 수 있게 된다. 가스혼합기의 성능실험을 위하여 압력을 조절하여 혼합가스의 유량을 조절하는 실험과 이에 따른 농도 재현성을 측정하였다. 정밀 압력 조절기의 설정압력을 0.04~0.16MPa까지 0.02MPa단위로 압력을 변화 시켜본 결과 발생되는 혼합기체의 유량은 35~175$m\ell$/min의 범위까지 유량을 자유롭게 조절 할 수 있었으며 발생기체의 농도는 압력에 따라 0.1~0.3%의 편차를 나타내었고 동일압력에서 시간 경과에 따른 재현성 측정 결과는 0.1% 수준으로 나타나 본 장치를 환경기체조절 저장챔버 또는 신선 농산물의 호흡속도 측정에 사용 할 수 있을 것으로 판단되었다.

  • PDF

Experimental Study on Combustion Performances with Variations in Main Air-ratio and Dilution hole-pattern (주연소 영역 공기배분 및 희석공기공 배치에 따른 연소 성능 변화 연구)

  • Kim, Minkuk;Kim, Hanseok;Jung, Seungchai;Park, Heeho
    • Proceedings of the Korean Society of Propulsion Engineers Conference
    • /
    • 2017.05a
    • /
    • pp.254-257
    • /
    • 2017
  • As a part of the development of aircraft gas turbines, combustion performance tests have been conducted in the single combustor sector. The effects of change in the amount of air supplied to the main combustion zone to the performance of the combustor, such as a pollutant emission, a liner temperature distribution and an exit temperature patterns, were studied. Emissions of CO and NOx increased with the main air-ratio and exit temperature pattern was improved. When changing the pattern of the dilution holes, it was shown that the temperature patterns on the exit plane of the combustor and the surface of liner changed depending on the main flame structure and mixing with diluent air. These observations will be applied to combustor liner designs to improve combustor durability and emissions reduction performance.

  • PDF

Environmental Regulations and Measurement of Market Power in a Depletable Resource Industry (환경규제를 고려한 고갈성 자원산업의 시장지배력 측정)

  • Lee, Myunghun
    • Environmental and Resource Economics Review
    • /
    • v.18 no.4
    • /
    • pp.745-766
    • /
    • 2009
  • It is not valid to measure the degree of market power based on the markup of price over marginal market cost in an industry for which the market price of some inputs is not available because those inputs are then excluded in estimating the dual total cost function. If the roles of those inputs are ignored, the markup of price over marginal market cost is likely to be positive in the perfectly competitive industry. In order to have accurate market power markups for the environmentally regulated Korean iron and steel industry, in which the market price of raw material and the price of abatement capital are hard to obtain, in this paper, a dual cost function is derived given the optimal quantities of raw material and abatement capital, and then estimated jointly with the supply relation. The annual average degree of market power for the industry is estimated to be 0.49 over the period 1982~2001. Ignoring environmental regulation would overstate the degree of market power by about 8 percent.

  • PDF

Estimation of net water consumption considering water use pattern for upland crops of Jeju Island (제주도 밭작물 용수이용 특성을 고려한 순물소모량 산정)

  • Kim, Chul-Gyum;Kim, Nam-Won
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2015.05a
    • /
    • pp.455-455
    • /
    • 2015
  • 농업용수 수요량을 산정하는 방법으로서는 계측 및 추정방법에 따라 사용수량을 직접 계측하는 방법, 대표작물의 단위수량으로 추정하는 방법, 증발산 이론을 이용하여 추정하는 방법 등이 있다. 우리나라에서는 현실적으로 농업지역에서의 계측자료가 충분하지 못하고, 자연조건에 따라 크게 좌우되는 농업용수 특성상 증발산 이론에 의한 수요량 추정기법이 주로 적용되고 있으며, 그 중에서도 필요수량 개념의 접근법이 과거로부터 많이 활용되어 왔다. 이 방법은 경작지 내 작물의 생육에 필요한 수량을 공급하기 위한 목적으로 저수지나 관정 등의 시설용량 결정 및 계획 수립을 위해 활용되는 방법으로서, 1965년도 처음 수립된 수자원장기종합계획에서부터 현재까지 우리나라 농업용수 수요량 추정에 적용되어 왔으며, 제주도 수자원관리종합계획에서도 적용되었다. 또 다른 접근법으로서 유역에서의 물수지 관점에서 경작지 내 물 사용에 의해 감소되는 하천 수량을 산정함으로써 순물소모량을 추정하는 방법이 있다. 물수지 분석은 장래의 용수수요와 기준년의 자연유량을 비교함으로써 향후의 안정적 용수수급을 계획하기 위한 방법으로서 많이 활용되고 있다. 우리나라에서는 1977년 낙동강유역 하구조사 기술보고서에서 처음 순물소모량 개념을 도입하여 수요량을 추정하였으며, 이후 제3차 수자원장기종합계획(1991-2011), 21세기를 바라보는 수자원전망(1993) 등에서 이 방법을 통해 미래의 용수수급 전망을 분석한 바 있다. 본 연구에서는 제주도 지역의 수자원 부존량 해석 및 장래 용수 이용에 따른 수자원의 과부족 해석, 수자원관리계획 수립을 위한 목적으로 순물소모량 개념을 적용하였다. 제주도는 경지면적 중 밭의 비율이 99%이상이며, 대부분 관정에 의한 지하수를 이용하여 스프링클러 또는 점적관개에 의해 용수량을 공급하고 있다. 따라서, 제주도 지질 특성 및 밭작물 관개특성을 고려하여 제주도 지역에 적합한 순물소모량 산정식을 제안하고, 이에 따라 시험유역을 대상으로 대표작물(감귤, 콩 등)에 대한 순물소모량을 산정하였다.

  • PDF

Hydration Properties of Low Carbon type Low Heat Blended Cement (무기질 자극제를 사용한 탄소배출 저감형 저발열형 혼합시멘트의 수화특성에 관한 연구)

  • Choi, Sung-Woo;Ryu, Deuk-Hyun;Kim, Hun-Sang;Kim, Gyu-Yong
    • Journal of the Korea Institute of Building Construction
    • /
    • v.13 no.3
    • /
    • pp.218-226
    • /
    • 2013
  • Of construction materials, cement and steel are the representative material that carbon dioxide. to reduce carbon emissions in the use of these materials The purpose of this study is low heat type blended cement, which is manufactured using a amount of cement than ordinary low heat blended cement. Low heat blended cement, mixing ratio of 10%, was investigated hydration properties and adiabatic temperature of concrete. The study in order to activate the reaction mineral admixture, a separate source of CaO and $SO_3$ areneeded. gypsum and lime, it expected amount of cement, low-carbon low-heat blended cement could reduce the hydration heat concrete than currentlyused low heat blended cement.

The Differences in Strategic Behaviors and Economic Performances Between Serial and Novice Entrepreneurs (연쇄창업의 행태와 성과에 대한 실증연구: ICT 창업초기 벤처기업을 대상으로)

  • Jo, Yuri
    • Asia-Pacific Journal of Business Venturing and Entrepreneurship
    • /
    • v.11 no.3
    • /
    • pp.17-25
    • /
    • 2016
  • This study aims to empirically examine serial entrepreneurship in Korea. Using the ICT startups survey data, I compare serial entrepreneurs with their novice counterparts in terms of business behaviors and performances. I found that serial entrepreneurs are more likely than novice ones to co-found a business with other entrepreneurs, enter a market with relatively large assets and expand their business into overseas market. They tend to put more importance on large-scale production and expansion strategy than first-time entrepreneurs. They are more likely to cooperate with suppliers and customers but less likely with the governments. From their experience of founding and operating businesses, the findings suggest that serial entrepeneurs are more market-oriented and more capable of managing internal human relations and external network of supply chain. Consequently, serial entrepreneurs show stronger early financial performance than novice entrepreneurs especially when they team up to found a business.

  • PDF

Synthesis of calcium phosphates from abalone shells via precipitation (전복패각을 침전법의 원료로 이용한 calcium phosphates의 합성)

  • Moon, Sung Wook;Lee, Byeong Woo
    • Journal of the Korean Crystal Growth and Crystal Technology
    • /
    • v.30 no.4
    • /
    • pp.143-149
    • /
    • 2020
  • Calcium phosphates recognized as important bio-materials have been successfully synthesized by simple precipitation using waste abalone shells, which are rich mineral sources of calcium. Calcium hydroxide (Ca(OH)2) originated from abalone shells was used as calcium source (precursor) for the preparation. Synthesis of calcium phosphates was performed by reacting calcium hydroxide with phosphoric acid (H3PO4) in aqueous solution. The initial precursor Ca/P ratios were adjusted to 1.50, 1.59 and 1.67, and the effect of the composition and the heat treatment on the synthesized powders and sintered bodies was investigated. The phases of the sintered ceramics prepared at 1150℃ were hydroxyapatite (HAp), β-tricalcium phosphate (β-TCP), and biphasic phosphate (HAp with β-TCP)), which were determined by the initial precursor Ca/P ratios. The results demonstrate the possibility for the synthesis of high value-added calcium phosphates from economical starting materials with low cost and high availability.