• Proceedings of the Korean Society of Computer Information Conference
• /
• 2022.01a
• /
• pp.179-180
• /
• 2022

미상무성이 2021년에 발표한 미국의 전체 무역량 중 한국의 비중은 3.4%로 미국의 수입국중 7위를 기록하고 있다. 그중 전자부품이 차지하는 비율은 26.7%로 미국 내에서도 주요 수입품목으로 분류된다. KOTRA는 미국의 디지털화에 따른 5G, 6G, 클라우드 컴퓨팅, 인공지능(AI) 등의 산업 시장 확대와 더불어 소재부품의 수요도 증가할 것으로 전망하고 있다[1]. 한국의 부품산업이 미국 시장에 보다 효과적으로 진출하기 위한 전략 수립을 위해 마이클 포터의 5 Forces Model을 미국의 산업 환경에 적용하였다. 한국의 부품기업들이 미국시장진출을위해서는 국가 내부적으로는 원천 기술력을 최대한 확보하고, 원자재 공급망을 안정화시켜 외부의 위협을 견제함과 동시에, 미국 시장에서는 한국 전자부품의 차별성을 인증받아 소비재 개발의 초기단계에 파트너사로 진입 산업 내 경쟁우위를 선점하는 것이 중요하다.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.7
• /
• pp.957-962
• /
• 2012

The principal objective of this study was to determine the effects of an ethanol extract of Polygonum multiflorum Thunberg (PMT) on body lipid metabolism in rats fed a high-cholesterol diet for 5 weeks. The rats were divided into 6 groups: a control group (I), a cholesterol-control group (II), a control group treated with 0.5% PMT (III), a control group treated with 1% PMT (IV), a cholesterol-control treated with 0.5% PMT (V), and a cholesterol-control group treated with 1% PMT (VI). Body weight gains and food efficiency ratios were not significantly different among the groups. The levels of serum blood glucose and triglycerides of the treated animals significantly decreased compared to the control and the cholesterol-control groups (p<0.05). There was a clear tendency of decreased LDL-cholesterol level in PMT-treated animals compared to the cholesterol-control group. However, no significant differences were observed in the serum HDL- and LDL-cholesterol levels. In the ratio of HDL-cholesterol to total cholesterol and HDL-cholesterol to LDL-cholesterol concentration, both the 0.5% PMT and 1% PTM extract intake groups had a higher percentage than in the control and cholesterol-control groups (p<0.05). In addition, the atherosclerotic index in serum was significantly lower in the PMT intake group than those in the group control and the cholesterol-control. These results indicated that the PMT extract was effective on the improvement of lipid metabolism in SD rats.

• Journal of Animal Science and Technology
• /
• v.51 no.5
• /
• pp.379-386
• /
• 2009

The aim of this study was tofind out the effects of supplementation of vitamin A to the diets of high or low amounts of concentrates for ruminants. In the first experiment, ruminal fermentation patterns with the data of pH, VFA production and cellulose disappearance rates in the rumen in vitro were investigated. In the second experiment, enzyme activities, gas production and dry matter degradabilities using cellulolytic bacteria, Ruminococcus flavefaciens were investigated. Ruminal pH was higher in low amounts of concentrates than in high amounts of concentrates as expected, however, no significant differences were found. Cellulose disappearance rates improved in vitamin A addition particularly in early incubation time (before 24h) and also the production of volatile fatty acids increased in vitamin A addition. These trends were more evident in diets containing high amounts of concentrates than in low amounts of concentrates and it may indicate that vitamin A is more required in the diets of high amounts of concentrates. In the second experiment, gas production, enzyme activities and dry matter degradabilities using cellulolytic bacteria, Ruminococcus flavefaciens were not different between vitamin A added and non-added diets. Ruminococcus flavefaciens may not require additional vitamin A for its own growth.

• The Journal of the Petrological Society of Korea
• /
• v.24 no.3
• /
• pp.253-272
• /
• 2015

The necessity of aggregate resources in Korea has been increased with a rapid economic growth since the 1990s. Construction activities have been increased drastically for last two decades. Such economic activities are much concentrated at big cities in Korea, and recently new neighbouring cities, such as multifunctional administrative city, enterprise city and innocity, are under construction at the surroundings of the cities. This new urbanization asked for an appropriate supply of raw construction materials such as cement, sands and gravels. The aim of this study is to understand and discuss the analysis and prospect of supply and demand of domestic sand and gravel. On the early years, 1990s, about 25% of the total consumption of these sands and gravels comes from riverine deposits; 20% to 25% from marine sands, 40% to 45% from forest rocks and the rest 5% to 15% from old fluvial deposits and crushed rocks. But nowaday the river aggregate, including both sands and gravels of a present river channel and those of the old fluviatile system are decreasing, while the crushed and forest aggregates and marine sand are now the main source of infrastructure resources. Thus it is increasingly necessary to investigate the forest and crushed aggregate resources potential in Korea where a current analysis indicate that the supply of riverine aggregates gradually decreases.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.282-288
• /
• 2002

본 연구는 상업용 규모의 쇄미선별공정에 사용할 수 있는 파이로트 규모 원통형 홈 선별기 시작기의 설계 및 제작에 필요한 기초 연구로서, 실험실용 원통형 홈 선별기를 이용하여 쇄미선별 실험을 실시하였다. 원통 회전속도, trough각도, indent 크기와 형상, 공급량을 요인으로 하여 완전립의 수거율과 순도, 쇄립의 수거율과 순도 및 선별효율을 조사하였다. 수행한 연구결과를 요약하면 다음과 같다. 1. 선별효율에 대한 원통 회전속도와 trough각도의 단독효과 및 교호작용은 1% 수준에서 유의성이 인정되었다. 원통 회전속도가 커지면trough각도 역시 그에 따라 적절히 증가시켜야만 선별효율의 저하가 방지되는 것으로 나타났다. 2. 최고 선별효율 값은 홈의 모양과 크기, 그리고 공급량에 관계없이 낮은 회전속도 (17rpm)와 중간 trough각도 (37.5$^{\circ}$또는 60$^{\circ}$)가 조합된 처리에서 나타났으며, 60~70% 범위의 높은 값을 보였다. 선별효율에 관한 원통 회전속도와 trough각도의 최적 조합은 17rpm, 37.5$^{\circ}$라고 판단된다. 3. 말발굽형 홈과 반구형 홈 간 선별효율의 차이는 없었다. 따라서, 실제 상업용 규모의 원통형 홈 쇄미선별기 개발에 있어서는 제작이 쉽고 유지.보수가 간편한 반구형 홈을 채택하는 것이 바람직할 것으로 생각된다. 길이 2.5mm이하의 미립인 쇄미의 선별에 사용할 홈의 크기는 2.5mm 보다는 약간 큰 3.0mm 정도가 되어야만 할 것으로 판단된다. 4. 공급량에 따른 선별효율의 차이는 1% 수준에서 유의성이 인정되었으며, 공급량이 작았을 때 전반적으로 선별효율이 높았다.타리 시프터를 채택, 사용하고 있었으며, 로타리시프터 사용상의 문제는 회전몸체를 지지하는 rod spring의 파손 등 구조와 관련된 것이었다. 로타리 시프터에 의한 쇄립의 선별과 제거정도는 만족할 만한 수준은 아니었다. 4. 국내 유통백미 완전립의 길이, 폭, 두께는 각각 5.02mm, 2.93mm, 2.03mm이었으며, 산물밀도와 천립중은 각각 745.3kg/m3 및 20.46g이었다. 5. RPC 백미제품의 품질경쟁력 향상을 유도하고자 현행 쇄미의 정의와 기준을 보다 강화하여 다음과 같은 쇄미 기준과 계급을 설정, 제시하였다. "완전립" - 길이가 3.75mm이상인 미립 "준완전립" - 길이가 2.5∼3.75mm인 미립 "쇄미" - 길이가 1.75∼2.5 mm인 미립 "이물" - 길이가 1.75mm이하인 미립.볼 때 상토 종자혼합비 6 : 1, 성형롤 회전속도 약 7 rpm으로 판단되며, 이 때 제조능력은 시간당 약 65 Kg(펠렛종자 약 39,000 개), 성형률 약 87 %, 종자손실률은 약 30 %, 펠렛종자 내 평균 종자수는 약 5.5 개, 완전 벼 종자 3개 이상 포함 펠렛종자 비율은 약 100 %가 될 것으로 보인다. 세포의 Androgen 생성을 촉진시키는 역할이 있는 것으로 보여진다 따라서 옻나무 유래 F는 포유동물의 생식기능에 중요하게 작용하는 것으로 사료된다.된다.정량 분석한 결과이다. 시편의 조성은 33.6 at% U, 66.4 at% O의 결과를 얻었다. 산화물 핵연료의 표면 관찰 및 정량 분석 시험시 시편 표면을 전도성 물질로 증착시키지 않고, Silver Paint 에 시편을 접착하는 방법으로도 만족한 시험 결과를 얻을 수 있었다.째, 회복기 중에 일어나는 입자들의 유입은 자기폭풍의 지속시간

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.439-439
• /
• 2012

본 연구의 목적은 색달하수처리장 방류수를 농업용수 및 조경용수 등으로 활용하기 위해 하수 처리수 재이용 사업 타당성을 분석하고자 한다. 색달하수처리장 하수재이용사업은 제주도의 지하수자원 보존과 수자원 이용의 고도화 및 방류수 재이용을 통한 갈수기 농업용수 보급으로 물자원(지하수)을 절약하고자 색달하수처리장을 대상으로 하수처리수를 농업용수로 공급하는 사업이다. 대상지역은 서귀포시 예래동에 위치하고 있으며, 중문관광단지가 소재한 마을로 제주관광의 중심지이다. 서귀포시의 총 인구는 153,797명이며 하수도 보급률은 77.7%이다('10 제주특별자치도 통계연보). 색달하수처리장이 위치한 예래동의 농지면적이 1,122ha이며, 밭(772.6)과 과수원(280.2) 등 제주도의 전형적인 농촌마을이다. 대상지역의 주요작물은 감귤, 무, 마늘, 양배추 등이 많이 재배된다. 제주도는 연평균 강수량이 1,832.6mm로 전국평균 1,274 mm 보다 많은 편이며, 월별 강수량은 6~8월까지 3개월 동안 연 강우량의 44%정도가 내려 여름 장마철에 집중되는 것으로 나타났다. 대상지구의 필요수량은 농업생산정비 계획설계기준에 제시된 방법을 이용하여 산정하였다. 지구내 재이용수를 공급할 관정 4개소의 총 설계 채수량은 $2,916m^3/day$, 급수면적은 125.0ha이며, 10년한발(가뭄)시 안정적인 농업용수 공급을 위하여 $4,964m^3/day$(농업용수 $3,834m^3/day$, 조경용수 $1,130m^3/day$)이 필요하다. 하수처리수 재이용을 위한 처리시설의 연간 유지관리비는 인건비, 전력비, 시설물 내구연한을 고려하여 적용 하였으며, 상수도 생산비 절감 비용과 하수재이용수 생산단가를 통한 단위 편익을 산정하면 401.5원/$m^3$ 이다. 연차별 수익으로 산정하여 비용 편익 비율(B/C Ratio)을 나타내면 1.22로 나타났다. 본 연구의 결과로부터, 대상지구의 수자원여건, 입지여건, 장래 수요, 등을 고려할 때, 제주 색달 하수처리장의 하수처리수의 농업용수재이용 사업은 타당성이 매우 높다고 할 수 있다. 그리고 특히 이 지역은 관광단지의 조경용수 수요(중문골프장 등)가 있어 용수의 유료공급이 가능하고 이를 유지관리비로 충당할 수 있어 타지역에 비해 사업의 경제성과 환경보전성이 매우 크다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.6
• /
• pp.460-468
• /
• 2021

This study investigated the enhanced combustion efficiency of an "air-cooled combustion system" with single F.D. fan, and performed a numerical analysis for the operation and design conditions to increase the combustion efficiency. The combustion efficiency in an actual combustor was compared before and after the structure modification. Numerical analysis for application of a single fan revealed the difficulty of forming a turbulence for circular combustion conditions. This is because the supply ratio of combustion air supplied into 2 flow paths becomes irregular in the combustion furnace due to a change in friction force and pressure in each flow path. Subsequently, two methods of supplying air into the combustion furnace were analyzed numerically to obtain the optimal combustion conditions of an air-cooled combustion system. The first method involved injecting the preheated combustion air after a 180~360 degree rotation from the outer wall, whereas in the second method, the combustion air was injected into the combustion furnace in a tangential direction after primary heat exchange outside the combustion furnace, by applying a rotatable vane structure in the combustion furnace. Results reveal that application of a single F.D. fan to the air injection into a rotatable combustion furnace is desirable for optimization of the combustion conditions for applying a duct structure having a dual cooling wall for the cooling of the outer wall of the combustion furnace, and for maintaining perfect mixing in the combustion furnace. We therefore confirmed enhanced combustion efficiency by comparing the actual combustion efficiency before and after structure modification.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.4D
• /
• pp.469-476
• /
• 2008

Recently, TOD gains popularity as a traffic solution measure of high density urban regeneration projects. The purpose of this study is to investigate traffic impacts of high density TOD projects, and to identify the issues to be resolved. For a case study, it chooses Gangnamgucheong station in Gangnam area served by two subway lines, and designates 400m radius from the station as a site for high-density development. The MOEs chosen for this study is traffic volume, time, distance, speed, and mode share. The SECOM model is adopted for traffic simulation. The analysis results show that high-density TOD is an effective tool for traffic improvement even with only one station area being implemented. It is found that the traffic volume increases near the station in nature where high-density development occurs, but it declines overall in the rest of Gangam area. The total travel time and distance of passenger vehicles decline, meaning that the traffic condition becomes better than before. With regulation on parking supply, the improvement becomes more vivid. In terms of the changes of traffic speed, both alternatives show 4.1% increase in speed, but the difference between alternatives is not quite noticeable because of the induced vehicle demand driven to the streets with improved traffic condition. The mode share changes occur for the benefit of subway ridership, because the study station is equipped with two subway line services. When mixed with parking supply restriction, the impact becomes clearer.

• Journal of Platform Technology
• /
• v.12 no.2
• /
• pp.34-44
• /
• 2024

This paper proposes a dynamic clock supply control algorithm and a system load power stabilization algorithm that minimizes the power consumption of the sensing system, which accounts for the largest percentage of power consumption in mobile devices, to extend the usage time of the rechargeable battery mounted on the mobile device. The dynamic clock supply control algorithm can reduce the power consumed by the sensing system by configuring a circuit to cut off the power of the sensing system and by recognizing the state of low sensor change and adjusting the measurement cycle. The system load power stabilization algorithm is an algorithm that controls the power of the surrounding module according to the power consumption state, and when it requires a lot of power, it controls the clock supply to stabilize the operation. The experimental results confirmed that applying only the dynamic clock supply control algorithm reduces the power consumed by the sensing system by 17%, and applying only the system load power stabilization algorithm reduces power consumption by 9.3%, enabling it to operate stably in situations that require a lot of power such as image processing. When both algorithms were applied, the power consumption of the battery was reduced by 67% compared to before applying the algorithm. Through this, the reliability of the proposed method was confirmed.

• Journal of Service Research and Studies
• /
• v.14 no.2
• /
• pp.82-100
• /
• 2024

Due to the intensifying global technological competition, the strategic and economic importance of intellectual property such as patents as intangible assets is increasing. The purpose of this study is to understand the current status of patent innovation in the service industry and to derive the characteristics and implications of patent innovation in the service industry. To this end, this study conducted an investigation and analysis to understand the characteristics of patent innovation in the service industry based on the data from the business activity survey. The proportion of patent companies in the service industry, characteristics of each service industry, proportion of each service industry, and the number of patent rights holdings were analyzed. In addition, the trend of patent changes in the service industry was investigated. The service industry was compared and analyzed with other industries based on the results of the analysis of patent innovation in the service industry. In particular, the service industry was divided into four types in terms of the rate of increase in the proportion of patent companies and the ratio of patent holing companies, and the types were derived. Based on the analysis results, the characteristics of patent innovation in the service industry were presented. As a result of the study, the proportion of patent holding companies in the service industry was lower than that of other industries, and the gap with other industries was widening, showing that the patent innovation of service companies is lower than that of other industries. The average number of patents held by service industry companies was lower than that of other industries, and the increase rate of the number of patent rights held was also lower than that of other industries, widening the gap. Patent innovation in the service industry can be divided into four quadrants in terms of the rate of increase in the proportion of patent holding companies and the proportion of patent holding companies, and it has been studied that the service industry needs policy support suitable for the characteristics of patent innovation in the quadrant to which the individual service industry belongs.