• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.17-22
• /
• 2009

계절에 따른 토양공극의 수리학적 변화를 파악하기 위해서 설마천 유역의 범륜사 독립사면과 광릉 원두부 소유역의 독립사면을 대상으로 장력침투실험을 실시하였다. 토양수분 확보에 신뢰를 받기위해서 TDR(Time Domain Reflectometry)및 현장에서 토양의 불포화 투수계수 측정이 가능한 장력침투계(Tension infiltrometer)를 이용하였다. 계절에 따른 자료수집을 위해서 2008년 3월 20일 부터 약 6주간격으로 10월 29일까지 5회에서 6회 토양수분 자료 및 토양장력침투 자료를 획득하였다. 획득한 자료를 이용하여 포화 및 불포화 수리전도도, 대공극 유효흐름분율(macropore flow), 대공극 유효부피분율을(effective macroporosity) 나타내었다. 분기별로 자료분석 결과 계절별 특성이 나타남을 알 수 있다. 수리전도도는 3월, 5월, 10월은 유사한 반면 6월과 7월 그리고 9월은 상대적으로 높았다. 이는 여름철에 공극 발달이 활발하다는 것을 의미한다. 선행토양수분은 수리전도도에 영향을 미치는 것으로 나타났다. 대공극의 발달은 삼림과 같은 복잡 경관에서는 강우사상에 따른 토양수분의 공간 분포 및 이송, 유출과정이 물순환에 영향을 미친다. 지형분석을 통한 공극의 흐름특성과 토양수분 유의성에 대하여 논의하였고, 대공극 변화에 밀접한 관계가 있는 식생과 그밖에 계절적으로 발달을 일으키는 요인을 모색 하였다. 본 연구는 계절에 따라 변하는 수리전도도를 기초로 하여 불포화대에서 토양공극의 수리학적 변화와 시공간적으로 침투흐름에 얼마나 영향을 주는가를 보여준다.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.713-716
• /
• 2008

In about the concrete application which recycles Ash the research came to be advanced as research in compliance with researchers relation actively in about cement substitutional concrete mixing ratio and burglar quality of existing. The research which it sees as fundamental research the research which it follows in cement substitutional concrete mixing ratio of existing and it researched different Bottom-Ash recycling qualities in about cup aggregate partial substitution Bottom-Ash application.

• The Journal of Engineering Geology
• /
• v.13 no.4
• /
• pp.419-428
• /
• 2003

In order to evaluate groundwater movement and the infiltration of contaminants, such as petroleum products, the determination of porosity and effective porosity is very important. Porosity and effective porosity are important physical parameters that determine the transfer and movement of water and solutes in porous media. Various methods of determining these parameters have been developed, with varying degrees of accuracy and applicability. Most of the existing methods produce static results. They do not produce instantaneous and real time of porosity and effective porosity in a porous media. In this study, we used a new permittivity method called Frequency Domain Reflectometry with Vector analyzer (FDR-V) to determine the porosity and effective porosity of some sand samples in the laboratory. The advantage of the FDR-V method is that it instantaneously determines the temporal variation of dielectric constants of porous media. Then, the porosity and the effective porosity of porous media are computed using well established empirical equations. Results obtained from the FDR-V method compared favorably with results from other permittivity methods such as gravimetric, injection and replacement tests. The ratio of effective porosity to porosity was 85 - 92 %, when FDR-V was used. This value compared favourably with 90 %, which has been usually quoted in previous studies. Considering the convenience and its applicability, the EDR-V permittivity holds a great potential in porous media and contaminant transport studies.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.798-799
• /
• 2015

본 논문에서는 영구자석의 형상을 변화시켜 표면 부착형 동기 전동기(Surface Permanent Magnet Synchronous Motor, SPMSM)의 토크리플을 저감하였다. 교류전동기의 경우 공극에 자속이 정현적으로 분포할수록 역기전력 파형이 정현파에 가까워지고, 토크리플이 작아진다. 위의 조건을 바탕으로, 자석의 사용 양을 동일하게 유지하면서 공간고조파를 최소화하기 위해 공극에 자속이 정현적으로 분포할 수 있도록 자석 형상에 모깎기를 적용하여 SPMSM의 최적설계를 진행하였다. 2D 유한요소해석법(Finite Element Method)을 이용하여 각 형상별 토크, 역기전력 등의 모터의 기본 특성들을 해석하여 영구자석 형상이 SPMSM의 성능에 어떠한 영향을 미치는지 분석하였다.

• Journal of the Korean Geotechnical Society
• /
• v.32 no.1
• /
• pp.55-62
• /
• 2016

This study presents the numerical results of soil-water characteristic curve for sandy soil by pore network model. The Jumunjin sand is subjected to the high resolution 3D X-ray computed tomographic imaging and its pore structure is constructed by the web of pore body and pore channel. The channel radius, essential to the computation of capillary pressure, is obtained based on the skeletonization and Euclidean Distance transform. The experimentally obtained soil-water characteristic curve corroborates the numerically estimated one. The pore channel radius defined by minimum radii of pore throat results in the slightly overestimation of air entry value, while the overall evolution of capillary pressure resides in the acceptable range. The relative permeability computed by a series of suggested models runs above that obtained by pore network model at high degree of saturation.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.4 no.3
• /
• pp.188-197
• /
• 1999

In order to estimate the uranium flux from seawater to sediments, we took pore water samples and deployed benthic chambers on seafloor of Chonsu Bay, Korea. The uranium flux across the sediment-water interface was estimated from the pore water to be 0.112-0.566 mg/$m^2yr$, corresponding to a removal flux of $4.3-21.5{\times}10^7$ gU/yr for the entire Yellow Sea. Nutrient fluxes from sediment to bottom water were estimated to be 135.6 mmol/$m^2yr$ for ammonia, 228.2 mmol/$m^2yr$ for nitrate, 36.8 mmol/$m^2yr$ for phosphate and 23.9 mmol/$m^2yr$ for silicate. The redox boundary, based on the distribution of pore water nitrate and solid phase manganese, was located at 3-5 cm below the sediment surface. Phosphate flux obtained by benthic chambers was 28.S mmol/$m^2yr$. On the other hand, estimates of uranium and silicate fluxes were orders of magnitude greater than those based on pore water profiles. Flux estimates on the basis of pore water concentration is believed to have greater reliability than those obtained from benthic chamber data.

• Journal of Soil and Groundwater Environment
• /
• v.13 no.3
• /
• pp.27-36
• /
• 2008

This paper presents a comprehensive laboratory study that examines the effects of porosity, water content, density and grain size distribution on the thermal conductivity of soils which were sampled from 16 synoptic stations of Korea. The experimental results clearly demonstrate that porosity and water content are important parameters which strongly affect the thermal conductivity of soils. Soils with lower porosities and higher water contents have higher thermal conductivities. On the contrary, increase of the matrix density slightly increases the thermal conductivity, and grain size distribution hardly affects the thermal conductivity. Dry soils with the same porosity tend to have more scattered values of thermal conductivity than wet soils. Based on the experimental results, a multiple linear regression model and a nonlinear regression model, having two regression variables of porosity and water content, were presented to predict thermal conductivity. Both models show a high accuracy of prediction with $R^2$ values of 0.74 and 0.82, respectively. Thus, it is expected that the suggested empirical models can be used for predicting thermal conductivity of soils by measuring porosity and water content.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.24 no.6
• /
• pp.566-572
• /
• 2004

It is necessary to measure the direct current with a non-contact methodology for the liquid or gas phase, as welt as the conducting metals. This paper described a theoretical consideration and experimental verification for a non-contact quantitative direct current measurement system using the Faraday effect and magnetic flux leakage. The leakage of magnetic flux occurs around a gap when a ferromagnetic core including the discontinuous gap is magnetized. Two large anisotropic domains in a magneto-optical film are occurred by the vertical component of leaked magnetic flux and the domain walls are paralleled to the center of the gap. Here, the symmetrical arrangement of domains are deflected when a vertical magnetic field is applied to the magneto-optical film. The domain wall of the magneto-optical film are relocated when a measuring current passes through the ferromagnetic core. Therefore, a direct current passing through the core can be determined quantitatively by the measurement of moving distance of the domain wall.

• Journal of Korean Society of Forest Science
• /
• v.85 no.1
• /
• pp.66-75
• /
• 1996

This study was carried out to examine the forest fire effect on water storage characteristics in the forests. Water storage capacity of the burned area was analyzed by several major factors, such as soil pore, maximum water content, effective water storage, and percolation rate. The results obtained from the analysis of major factors are as follows; The deeper soil depth, the less total pore, coarse pore, effective water storage, and percolation rate. However, fine pore increased slightly in both burned area and control plot. As compared with control plot, burned area showed lower percolation rate, coarse pore, and effective water storage, but higher values of fine pore. Directly after forest fire, the soil pore is little affected. But as the time passes, top soil structure changes and soil pore also is affected even in a deep soil. Estimated effective water storage was lower at top soil of Namcheon and at deep soil of Namha in all the burned areas, but slowly decreased in deep soil compared to control plots. Therefore it was concluded that forest water storage capacity was greatly affected by the forest fire.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2000.11a
• /
• pp.43-53
• /
• 2000