• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.32 no.3
• /
• pp.213-220
• /
• 2014

This is the study to conduct the topographical analysis using the orthophotographic data from the waypoint flight using the UAV and constructed the system required for the automatic waypoint flight using the multicopter.. The results of the waypoint photographing are as follows. First, result of the waypoint flight over the area of 9.3ha, take time photogrammetry took 40 minutes in total. The multicopter have maintained the certain flight altitude and a constant speed that the accurate photographing was conducted over the waypoint determined by the ground station. Then, the effect of the photogrammetry was checked. Second, attached a digital camera to the multicopter which is lightweight and low in cost compared to the general photogrammetric unmanned airplane and then used it to check its mobility and economy. In addition, the matching of the photo data, and production of DEM and DXF files made it possible to analyze the topography. Third, produced the high resolution orthophoto(2cm) for the inside of the river and found out that the analysis is possible for the changes in vegetation and topography around the river. Fourth, It would be used for the more in-depth research on landscape analysis such as terrain analysis and visibility analysis. This method may be widely used to analyze the various terrains in cities and rivers. It can also be used for the landscape control such as cultural remains and tourist sites as well as the control of the cultural and historical resources such as the visibility analysis for the construction of DSM.

• Journal of Cadastre & Land InformatiX
• /
• v.50 no.1
• /
• pp.107-123
• /
• 2020

With stabilization of the recent multi-GNSS infrastructure, and as multi-GNSS has been proven to be effective in improving the accuracy of the positioning performance in various industrial sectors. In this study, in view that SF(Single frequency) GNSS receivers are widely used due to the low costs, evaluate effectiveness of SF Real Time Point Positioning(SF-RT-PP) based on four multi-GNSS surveying methods with RTCM-SSR correction streams in static and kinematic modes, and also derive response challenges. Results of applying SSR correction streams, CNES presented good results compared to other SSR streams in 2D coordinate. Looking at the results of the SF-RT-PP surveying using SF signals from multi-GNSS, were able to identify the common cause of large deviations in the altitude components, as well as confirm the importance of signal bias correction according to combinations of different types of satellite signals and ionospheric delay compensation algorithm using undifferenced and uncombined observations. In addition, confirmed that the improvement of the infrastructure of Multi-GNSS allows SF-RT-SPP surveying with only one of the four GNSS satellites. In particular, in the case of code-based SF-RT-SPP measurements using SF signals from GPS satellites only, the difference in the application effect between broadcast ephemeris and SSR correction for satellite orbits/clocks was small, but in the case of ionospheric delay compensation, the use of SBAS correction information provided more than twice the accuracy compared to result of the Klobuchar model. With GPS and GLONASS, both the BDS and GALILEO constellations will be fully deployed in the end of 2020, and the greater benefits from the multi-GNSS integration can be expected. Specially, If RT-ionospheric correction services reflecting regional characteristics and SSR correction information reflecting atmospheric characteristics are carried out in real-time, expected that the utilization of SF-RT-PPP survey technology by multi-GNSS and various demands will be created in various industrial sectors.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.36 no.6
• /
• pp.43-54
• /
• 2009

This study attempted to develop a model for selecting sites for ecologically effective, multi-functional wetlands during the environmental and ecological planning stage, prior to land use Planning. This model was developed with an emphasis upon the creation of a water circulation system for a newly-created city, dispersing and retaining the run-off that is increased due to urbanization and securing spaces to create wetlands that can promote urban biodiversity. A series of Precesses for selecting sites for wetland restoration and creation - watershed analysis, selection of evaluation items, calculation of weights, reparation of thematic maps and synthesis - were incorporated into the model. Its potentials and limitations were examined by applying it to the recently-planned WiRae New Community Development Area, which is located in the Seoul metropolitan region. At the watershed analysis stage, the site was divided into 13 sub-catchment areas. Inflow to watersheds including the area was $3,020,765m^3$ Run-off before and after development is estimated as $1,901,969m^3$ and $1,970,735{\sim}2,039,502m^3$, respectively. The total storage capacity required in the development area amounts to $68,766{\sim}137,533m^3$. When thematic maps were overlapped during the selection stage for wetland sites, 13 sub-catchment areas were prioritized for wetland restoration and creation. The locations and areas for retaining run-off showed that various types of wetlands, including retaining wetlands (area wetlands), riverine wetlands (linear wetlands) and pond wetlands (point wetlands), can be created and that they can be systematically connected. By providing a basic framework for the water circulation system plan of an entire city, it may be used effectively in the space planning stage, such as planning an urban eco-network through integration with greet areas. In order to estimate reasonable run-off and create an adequate water circulation system however, a feedback process following land use planning is required. This study strived to promote urban changes in a positive direction while minimizing urban changes in negative forms.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.25 no.4
• /
• pp.267-275
• /
• 2023

This study predicted rice harvest date in South Korea using 11-year (2012-2022) hindcasts based on dynamically downscaled 2m air temperature at subseasonal (1-month lead) timescale. To obtain high (5 km) resolution meteorological information over South Korea, global prediction obtained from the NOAA Climate Forecast System (CFSv2) is dynamically downscaled using the Weather Research and Forecasting (WRF) double-nested modeling system. To estimate rice harvest date, the growing degree days (GDD) is used, which accumulated the daily temperature from the seeding date (1 Jan.) to the reference temperature (1400℃ + 55 days) for harvest. In terms of the maximum (minimum) temperatures, the hindcasts tends to have a cold bias of about 1. 2℃ (0. 1℃) for the rice growth period (May to October) compared to the observation. The harvest date derived from hindcasts (DOY 289) well simulates one from observation (DOY 280), despite a margin of 9 days. The study shows the possibility of obtaining the detailed predictive information for rice harvest date over South Korea based on the dynamical downscaling method.

• Land and Housing Review
• /
• v.3 no.4
• /
• pp.369-378
• /
• 2012

In France, there are many forms of organizations based on the intercommunal solidarity for city development and management. The purpose of the collaboration among Communes is to achieve high quality and well-equipped service-delivery system through co-operation of public services needed grand finances : water supply and sewage system and waste disposal system etc. The cooperation among French Communes and its effects, even though these were owing to the existing French local administration system, continued throughout regional co-management and social co-development process. This study suggested some characteristics and implications of the collaborative-style French new-town development and management organizations focused on the EPA, SAN and CA. First, the role of developmental corporation like EPA and its collaborative structure of decision-making are meaningful, because in these ways many related Communes could share a goal of new town development. Second, the way of new town corporation (SAN) is important in the sense of enabling the Communes to collaborate with each others while maintaining autonomy, so those are not simply state-directed objects, which was very difficult in the former French local administration system. Finally, transforming to CA (Communautes d'agglomeration:city community), EPA as an intercommunal corporation is possible to extend its purpose to the domain of regional planning including new town and periphery areas and change its position to a subject which can practice Commune's sustainable development according to stages of city's development and maturity. The most important implication of this study on urban development in Korea is that administrative consultative council or association among local governments and related authorities need to be established and effectively operate because multi-stakeholders could share a goal of urban development and management through that.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.49 no.5
• /
• pp.125-137
• /
• 2021

How can we explain the phenomenon of small, old alleyways in the city becoming rising commercial places attracting people from an aesthetic perspective? This research discusses distinctive aesthetic experiences of urban commercial alleyways, which are located on inner roads and consist of small-scale stores and explore the specific aspects of Sharosu-gil, located in Gwanak-gu, Seoul. The aesthetic experience of urban commercial alleyways is generated by the contrast with the refined urban fabric along main roads in terms of space, the gap between the old and the new, and the antagonism between the known and the less known. The approach to Sharosu-gil consists of the high-rise buildings along the main road built in the 2000s, then encountering low-rise buildings on inside roads built from the late 1970s to the present. Therefore, it is judged that the site has sufficient conditions to generate the aesthetic experience as an urban commercial alleyway. As a result of analyzing the street improvement projects, first, the official announcement of the name 'Sharosu-gil' was interpreted as an escape from the place specificity and garnered the acquisition of the characteristics of an alternative. Secondly, the improvement project for old-established signboards was interpreted as harmony between the new and the old and the loss of temporality. Thirdly, in the pedestrian priority road project, the pavement was interpreted as a reinforcement of the identity as an alleyway and the visualization of the area. Since the reality of urban commercial alleyways depends on the user's visiting, it is necessary to interpret alleyways from the perspective of the senses and aesthetics, not just from social phenomena or capital logic perspective. The study will cast implications for relevant schemes and data-driven research.

• The korean journal of orthodontics
• /
• v.36 no.5
• /
• pp.339-348
• /
• 2006

Objective: With development of the skeletal anchorage system, orthodontic mini-implant (OMI) assisted on masse sliding retraction has become part of general orthodontic treatment. But compared to the emphasis on successful anchorage preparation, the control of anterior teeth axis has not been emphasized enough. Methods: A 3-D finite element Base model of maxillary dental arch and a Lingual tipping model with lingually inclined anterior teeth were constructed. To evaluate factors influencing the axis of anterior teeth when OMI was used as anchorage, models were simulated with 2 mm or 5 mm retraction hooks and/or by the addition of 4 mm of compensating curve (CC) on the main archwire. The stress distribution on the roots and a 25000 times enlarged axis graph were evaluated. Results: Intrusive component of retraction force directed postero-superiorly from the 2 mm height hook did not reduce the lingual tipping of anterior teeth. When hook height was increased to 5 mm, lateral incisor showed crown-labial and root-lingual torque and uncontrolled tipping of the canine was increased.4 mm of CC added to the main archwire also induced crown-labial and root-lingual torque of the lateral incisor but uncontrolled tipping of the canine was decreased. Lingual tipping model showed very similar results compared with the Base model. Conclusion: The results of this study showed that height of the hook and compensating curve on the main archwire can influence the axis of anterior teeth. These data can be used as guidelines for clinical application.

• Journal of the Korean Geographical Society
• /
• v.38 no.3
• /
• pp.400-412
• /
• 2003

It is now widely recognized that new Information and Communication Technologies (ICTs) have been changing the way tv which firms conduct their businesses. Examples are the application of enterprise resources planning (ERP) and business process reengineering (BPR) to increase the efficiency of internal resources management, adoption of Business-to-Business e-commerce (B2B e-com) to integrate supply chain, and invention of new marketing channels such as Business-to-Customer (B2C) e-com. These new ways of conducting businesses are believed to help firms to reduce transaction costs and increase productivity. As a result, new ICTs have played an important role in recent growth of many small firms into multi-functional and multi-product corporations and in their spatial expansion towards internationalization as well. This paper takes Haier in China as a case to study the role of new ICTs in the growth of firms and reveal how the new technologies have facilitated the expansion of Haier into a transnational corporation (TNC) by examining the internationalization process of the firm in relation to its adoption of new ICTs in the period from 1990 to 2002. The study reveals that the adoption of new Ins has helped Haier to integrate its functional units located in dozens of places across the world, which is essential to the internationalization of a firm, and to link closely together its worldwide suppliers and customers to achieve just-in-time (JIT) production and delivery. As such, the authors of the paper argue that, without the facilitation of new ICTS, Haier could not have developed into a TNC in less than ten years.It is now widely recognized that new Information and Communication Technologies (ICTs) have been changing the way tv which firms conduct their businesses. Examples are the application of enterprise resources planning (ERP) and business process reengineering (BPR) to increase the efficiency of internal resources management, adoption of Business-to-Business e-commerce (B2B e-com) to integrate supply chain, and invention of new marketing channels such as Business-to-Customer (B2C) e-com. These new ways of conducting businesses are believed to help firms to reduce transaction costs and increase productivity. As a result, new ICTs have played an important role in recent growth of many small firms into multi-functional and multi-product corporations and in their spatial expansion towards internationalization as well. This paper takes Haier in China as a case to study the role of new ICTs in the growth of firms and reveal how the new technologies have facilitated the expansion of Haier into a transnational corporation (TNC) by examining the internationalization process of the firm in relation to its adoption of new ICTs in the period from 1990 to 2002. The study reveals that the adoption of new Ins has helped Haier to integrate its functional units located in dozens of places across the world, which is essential to the internationalization of a firm, and to link closely together its worldwide suppliers and customers to achieve just-in-time (JIT) production and delivery. As such, the authors of the paper argue that, without the facilitation of new ICTS, Haier could not have developed into a TNC in less than ten years.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1385-1390
• /
• 2006

외국에서 ASM 모델의 BNR 적용 연구결과를 국내 하수에 적용하기에는 하수농도, 온도, 슬러지농도 등이 국내와는 달라 적용상 무리가 있다. 본 연구에서 BNR 시뮬레이션을 위한 입력 자료로 활용되는 인자들은 IAWPRC task group에서 제안하는 값들을 사용하되 국내 하수성상에서 필요로 하는 인자들은 직접 실험을 통하여 부분적으로 구해냄으로써 모델 시뮬레이션의 신뢰도를 높이고자 하였다. F/M비의 변화량과 1/SRT과의 관계로부터, 종속영양미생물 생산계수 $Y_H$값을 구한결과, 0.40mg VSS/mg COD였다. 이것을 ASM No.2d에 적용하기 위하여 mg cell COD formed/mg COD oxidized 단위로 환산한 결과 0.58을 나타냈다. H 하수처리장의 1차 침전지 하수를 이용하여 호기성상태에서 OUR Test를 통한 미생물에 의한 유기물 섭취시 산소섭취율 변화를 측정하였다. 호기성상태와 무산소상태에서 구한 쉽게 분해되는 용존성유기물(Ss)값을 비교해보면 각각 35.5mg/L와 39.9mg/L로 약간의 차이는 있으나 유사한 값을 보여주고 있다. 시뮬레이션을 위한 동력학적 계수 중 무산소 상태에서 종속영양미생물의 ${\mu}_{max,H}$는 $3.56d^{-1}$로 나타났고, 호기성상태에서는 구하면 ${\mu}_{max,H}$는 $4.2d^{-1}$로 산출되었다. 종속영양미생물의 사멸계수 $b_H$를 구하기 위한 실험에서 초기 OUR의 10%이내가 될 때까지 걸린 시간은 7일정도가 걸렸으며, 사멸률 $b_H$는 $0.043hr^{-1}$로 나타났다. 독립영양미생물의 최대비성장률 ${\mu}_{max,A}$는 최대암모니아 섭취률을 이용하여 구한 결과 $0.65d^{-1}$로 나타났다.EX>$60%{\sim}87%$가 수심 10m 이내에 분포하였고, 녹조강과 남조강이 우점하는 하절기에는 5m 이내에 주로 분포하였다. 취수탑 지점의 수심이 연중 $25{\sim}35m$를 유지하는 H호의 경우 간헐식 폭기장치를 가동하는 기간은 물론 그 외 기간에도 취수구의 심도를 표층 10m 이하로 유지 할 경우 전체 조류 유입량을 60% 이상 저감할 수 있을 것으로 조사되었다.심볼 및 색채 디자인 등의 작업이 수반되어야 하며, 이들을 고려한 인터넷용 GIS기본도를 신규 제작한다. 상습침수지구와 관련된 각종 GIS데이타와 각 기관이 보유하고 있는 공공정보 가운데 공간정보와 연계되어야 하는 자료를 인터넷 GIS를 이용하여 효율적으로 관리하기 위해서는 단계별 구축전략이 필요하다. 따라서 본 논문에서는 인터넷 GIS를 이용하여 상습침수구역관련 정보를 검색, 처리 및 분석할 수 있는 상습침수 구역 종합정보화 시스템을 구축토록 하였다.N, 항목에서 보 상류가 높게 나타났으나, 철거되지 않은 검전보나 안양대교보에 비해 그 차이가 크지 않은 것으로 나타났다.의 기상변화가 자발성 기흉 발생에 영향을 미친다고 추론할 수 있었다. 향후 본 연구에서 추론된 기상변화와 기흉 발생과의 인과관계를 확인하고 좀 더 구체화하기 위한 연구가 필요할 것이다.게 이루어질 수 있을 것으로 기대된다.는 초과수익률이 상승하지만, 이후로는 감소하므로, 반전거래전략을 활용하는 경우 주식투자기간은 24개월이하의 중단기가 적합함을 발견하였다. 이상의 행태적 측면과 투자성과측면의 실증결과를 통하여 한국주식시장에 있어서 시장수익률을 평균적으로 초과할 수 있는 거래전략은 존재하므로 이러한 전략을 개발 및 활용할 수 있으며, 특히, 한국주식시장에 적합한 거래전략은 반전거래전략이고, 이 전략의 유용성은 투자자가 설정한 투자기간보다 더욱 긴 분석기간의 주식가격정보에 의하여 최대한 발휘될 수 있음을 확인하였다.(M1), 무역적자의 폭, 산업의 생산

• Research in Plant Disease
• /
• v.8 no.2
• /
• pp.84-91
• /
• 2002

Disease forecasting in Korea was first studied in the Department of Fundamental Research, in the Central Agricultural Technology Institute in Suwon in 1947, where the dispersal of air-borne conidia of blast and brown spot pathogens in rice was examined. Disease forecasting system in Korea is operated based on information obtained from 200 main forecasting plots scattered around country (rice 150, economic crops 50) and 1,403 supplementary observational plots (rice 1,050, others 353) maintained by Korean government. Total number of target crops and diseases in both forecasting plots amount to 30 crops and 104 diseases. Disease development in the forecasting plots is examined by two extension agents specialized in disease forecasting, working in the national Agricul-tural Technology Service Center(ATSC) founded in each city and prefecture. The data obtained by the extension agents are transferred to a central organization, Rural Development Administration (RDA) through an internet-web system for analysis in a nation-wide forecasting program, and forwarded far the Central Forecasting Council consisted of 12 members from administration, university, research institution, meteorology station, and mass media to discuss present situation of disease development and subsequent progress. The council issues a forecasting information message, as a result of analysis, that is announced in public via mass media to 245 agencies including ATSC, who informs to local administration, the related agencies and farmers for implementation of disease control activity. However, in future successful performance of plant disease forecasting system is thought to be securing of excellent extension agents specialized in disease forecasting, elevation of their forecasting ability through continuous trainings, and furnishing of prominent forecasting equipments. Researches in plant disease forecasting in Korea have been concentrated on rice blast, where much information is available, but are substan-tially limited in other diseases. Most of the forecasting researches failed to achieve the continuity of researches on specialized topic, ignoring steady improvement towards practical use. Since disease forecasting loses its value without practicality, more efforts are needed to improve the practicality of the forecasting method in both spatial and temporal aspects. Since significance of disease forecasting is directly related to economic profit, further fore-casting researches should be planned and propelled in relation to fungicide spray scheduling or decision-making of control activities.