• The Journal of the Korean bone and joint tumor society
• /
• v.11 no.2
• /
• pp.175-182
• /
• 2005

Purpose: Bone tumor occurred in femur frequently involve proximal intertrochanteric region or distal metaphyseal region. Sometimes, the pathologic fracture can happen according to the size of tumor due to the substantial biomechanical stresses. Therefore, the prognosis can be improved biomechanically by the angled blade plate considering the anatomic configuration after the excision of tumor. Materials and Methods: Between October 1991 and April 2005, there were a total of 16 patients(17 cases) who were treated by the excision of tumor and internal fixation with the angled blade plate for bone tumor occurred in femur. After the excision of tumor, we filled the cavity by bone graft in 11 cases and bone cement in 6 cases. The internal fixation was used by angled blade plate in all cases. Result: The average follow-up time was 55.5 months(6-144 months) in 16 patients(17 cases). No metal failure occurred after the operation. Reoperation was performed in 4 cases due to tumor recurrence, and the internal fixation was firm until that. Conclusion: The angled blade plate can prevent the fracture until grafted bone incorporated to host bone, and protect fragile connection between cement and host bone.

• Ceramist
• /
• v.7 no.1
• /
• pp.47-60
• /
• 2004

골 대체재에서 생체활성재라 함은 이 물질이 체내에 식립 되었을 때 표면에 사람의 뼈와 물리적, 화학적으로 매우 유사한 성질을 갖는 저결정성 탄산 아파타이트가 스스로 형성되어 이 층을 매개로 하여 섬유성 조직의 생성 없이 신생골과 직접적으로 결합하는 능력을 갖는 물질을 말한다. 이와 같은 생체활성 물질은 1970년대 초 Hench가 Na$_2$O-CaO-SiO$_2$-P$_2$O$\^$5/ 글래스계에서 처음으로 발견하였으며 이를 Bioglass$\^$ⓡ/라고 명명한데서부터 유래한다. 그 후 결정성 아파타이트가 함유된 결정화 글래스인 Ceravital$\^$ⓡ/, 고결정성 아파타이트, 아파타이트와 wollastonite 결정을 포함한 Cerabone$\^$ⓡ/, 아파타이트와 phlogophite를 함유한 Bioverit$\^$ⓡ/, MgO-CaO-SiO$_2$-P$_2$O$\^$5/ 글래스, CaO-SiO$_2$ 글래스, ${\beta}$-tricalcium phosphate, 천연 calcite 등의 다양한 세라믹 물질이 생체활성을 갖는 것으로 보고되었다.(중략)

• The Journal of Korean Academy of Prosthodontics
• /
• v.29 no.3
• /
• pp.197-203
• /
• 1991

저작압을 골에 직접 분산시키고 의치를 직접 골에 부착시켜 의치의 안정성을 증진시키는 가능성을 실현하는 것이 오랫동안 보철과의사들의 목표였다. 수십년 동안 골과 티타늄 임프란트가 결합(적합)되는 골융합성 술식이 발전되어 왔으며 이 임프란트의 상부구조물로 고정식 보철물이 받아들여져 왔다. 현재까지 가장 흔한 상부구조는 고정식 보철물이다. 요즈음 골융합성 임프란트에 지지를 받는 오버 덴춰의 술식이 고정식 보철물과 다른 하나의 방법으로 간주되어질 수 있게 되었다. 오버덴춰 술식이 심미적 경제적 이유 그리고 다양하게 적용할 수 있기 때문에 최근에 확대되는 경향이 있다. 골융합성 임프란트에 의한 고정식 보철물에 대한 광범위한 장기 결과들이 있는데 반하여 여러 어태치먼트를 이용한 오버덴춰 술식은 임상결과나 적용에 과한 지식들이 거의 발표되지 않았으며, 현재까지 임프란트 오버덴춰를 가진 환자의 구강기능에 대한 단지 몇개의 연구들만이 발표되었다. 우리는 장기 임상평가에 의해서 임프란트 오버덴춰를 아주 조심스럽게 평가해야 한다.

• Applied Microscopy
• /
• v.34 no.4
• /
• pp.277-283
• /
• 2004

This paper reports that the ultrastructural nature of the interface process between the implants and surrounding bone has been studied after in vivo 1, 4, 8, 12 weeks of implantation of smooth machined implants into rabbit tibias. There was no indication of the fibrous connective tissue formation around the implant that imply intolerance of the bone tissue towards the implant after 1 week of implantation. The regions showing direct bone tissue bonding to the smooth machined implant contained osteoblast activating across the interface in the direction after 4 weeks of implantation. The reaction of a smooth machined implant caused in the first instance formation of an amorphous woven bone, which transformed into a mineralized bone containing collagen fibers. After 8 weeks of implantation, the activities of osteoblast initiated osseointegration forming bone matrix at the interface. During this period, the osteoblast surrounded with a matrix consisting of collagen bundles running in various directions. In the interface area between newly formed bone tissue and implants which has been inserted in rabbit tibias for 12 weeks, the implant and mineralized bone was separated by an amorphous electron dense material layer about $1{\sim}1.5{\mu}m$ in thickness.

• The Journal of Korean Academy of Prosthodontics
• /
• v.52 no.2
• /
• pp.105-112
• /
• 2014

Purpose: The aim of present investigation was to find out the influence of several times iatrogenic mobilization in the initial stage of implant installation on bone-implant osteointegration. Materials and methods: The experimental implants (3.75 mm in diameter, 8.0 mm in length) were made of commercially pure (Grade IV) titanium, and were treated with RBM ($MegaGen^{(R)}$: Ca-P) on lower 4.0 mm part. Only lower part of implant was inserted to bone and the implants were nonsubmerged. The 130 implants (two in each tibia) were inserted into the monocortical tibias of 33 rabbits which each weighed more than 3.5 kg (Female, New Zealand White). According to the removal torque interval, the groups were divided into 13 groups, group I (1 day), group II (1 day + 2 days), group III (1 day + 2 days + 3 days), group IV (1 day + 2 days + 3 days + 4 days), group V (2 days), group VI (2 days + 4 days), group VII (2 days + 4 days + 6 days), group VIII (2 days + 4 days + 6 days + 8 days), group IX (4 days), group X (4 days + 7 days), group XI (4 days + 7 days + 10 days), group XII (4 days + 7 days + 10 days + 14 days) and control group. In the control group, the removal torque was measured at 8 weeks with a digital torque gauge (Mark-10, USA). In the experimental groups, the removal torque was given once, twice, three times or four times by experiment design before the final removal torque and the value was measured each time. The implants were then screwed back to their original positions. All the experimental groups were given a final healing time of 8 weeks after placement, in which values were compared with the control groups and the 1st, 2nd, 3rd or 4th removal torque values in each experimental group. Results: In comparison of the final removal torque tests among experimental groups, the removal torque value of experimental groups except group XII were not statistically different that of control group. And the values of group I and II were significantly higher than the values of group VI, VIII, X, XI, and XII. In addition, the values of group III, IV, and V were significantly higher than group XI and XII. In comparison of the removal torque in the each experimental group, the final removal torque were significantly higher in all groups except group VIII, X, XI, and XII. Conclusion: If sufficient healing time was allowed, a few mobilization of fixture at the very early stage after the implant placement in the rabbits didn't interrupt the final bone to implant osseointegration.

• The Journal of the Korean bone and joint tumor society
• /
• v.12 no.2
• /
• pp.136-140
• /
• 2006

Pelvic bone is location with the worst prognosis in primary malignant bone tumor. Malignant bone tumor around symphysis pubis is extremely rare, and although small size, it is difficult to excise because of anatomical location. The authors report a case of intra-pelvic chondrosarcoma of the pubic bone with good functional result through resection by both superior & inferior pubic ramus osteotomy.

• Food Science and Preservation
• /
• v.13 no.3
• /
• pp.382-388
• /
• 2006

Physicochemical properties of chufa starch were investigated The result are summarized as follow: Moisture content crude protein and crude fat were 10.10%, 0.31% and 0.41,% respectively. Amylose content of chufa starch was 41.6% and blue value was 0.49. Lightness and whiteness of chufa starch was 96.36 and 92.23 of Hunter's color value. In iodine reaction, maximum absorbance wavelength (${\lambda}max$) was 628 nm. Water binding capacity was 83% and swelling power and solubility of chufa starch were increased slowly to $60^{\circ}C$, but increased rapidly after $60^{\circ}C$. Scanning election microscope(SEM) showed that granule type of chufa starch was round or elliptic type, and average granule size was $10{\mu}m$. The results by differential scanning calorimetry(DSC) revealed that gelatinization patterns were similar to those of potato or rice starch. In rapid viscoanalyzer(RVA) examination, pasting temperature was $79.95^{\circ}C$ and peak viscosity of chufa starch was 385.08.

• The Journal of the Korean bone and joint tumor society
• /
• v.13 no.2
• /
• pp.96-104
• /
• 2007

Purpose: The authors investigated whether 35 flexible nail-rotating hinge composite reconstructions around knee joint minimize junctional osteolysis of host bone. Material and Method: The reconstructive technique was as follows: 1) en bloc tumor resection, 2) filling of the host bone marrow cavity with multiple Ender nails, 3) assembling the Ender nails and an Endo-Link type total knee component with wire and bone cement. Result: Mean follow-up was 53 months (ranged 30~79). At final follow-up, 29 patients retained a mobile joint. Resection of more than 40% of bone showed a positive relationship with junctional hypertrophy (p=0.028). Eight patients showed nail breakage and eight prostheses were removed due to early or late infection. The cumulative prosthetic survival rate was 33% at 6 year. Average functional score according to the MSTS criteria was 26.8. Conclusion: Mid-term evaluations showed that results were fair. The revision process was straightforward. Junctional hypertrophy observed appears to give some clues as to how to minimize osteolysis at the prosthesis-host junction after modular prosthesis fixation.

• The korean journal of orthodontics
• /
• v.28 no.3 s.68
• /
• pp.431-440
• /
• 1998

While periodontal disease results in the extrusion of upper incisors with interdental spacing in adult patient, the intrusive movement should be executed for the rehabilitation in terms of esthetics and function. The present study was peformed to investigate the periodontal response following orthodontic intrusion of teeth with infrabony pocket. Bone defect and periodontal disease were produced adjacent to the both maxillary second lateral incisors in four adult dogs. Four weeks later, a flap operation was performed to eliminate inflammation and a reference notch was made on the root surface at the level of bottom of each defect. Two weeks after periodontal surgery, 4 weeks of intrusion and subsequent another 4 weeks of retention was executed on the right side of incisors while left incisors served as the control. Through the histologic analysis, following results were obtained. 1. Histologic section of control side showed the reduction of pocket depth after flap operation. However, the status of long junctional epithelium was observed while new connective tissue attachment occurred in a small area adjacent newly formed cementum 2. Epithelial attachment was less around the intruded incisor while new connective tissue attachment was much more compared to the control side. 3. Plenty of cells were observed in the connective tissue around the reference notch of the intruded incisor and the degree of the new cementum formation was higher in the intruded incisor than the control. The results of the present study suggested that an orthodontic intrusion of periodontally involved and extruded incisors could be carried out with a desirable periodontal response, provided that inflammation is under control.

• Journal of Periodontal and Implant Science
• /
• v.35 no.1
• /
• pp.153-161
• /
• 2005

파이브로넥틴은 세포외기질에 존재하는 당단백질로 세포의 부착, 이동, 성장 및 분화에 관여하며, 섬유아세포 성장인자는 세포의 증식 이동 및 분화에 영향을 주는 중요한 성장인자로 알려져 있다. 최근 연구에 의하면, 파이브로넥틴은 조골세포의 타이태늄 임플란트 표면으로 이주와 증식 및 골생성을 촉진하며, 섬유아세포 성장 인자는 파이브로넥틴에 상승작용을 한다고 보고된 바 있다. 이 실험의 목적은 파이브로넥틴 및 섬유아세포 성장인자의 복합 단백질을 이용하여 타이태늄 임플란트의 골 반응을 알아보는 것이다. 체중 2.5 kg 내외의 건강한 18 마리의 웅성가토를 준비하여 무균 사육하였고, 순수 타이태늄을 절삭가공하여 직경 3.5mm, 길이 6mm 의 machined surface를 지니는 screw type 의 임플란트를 준비하였다. 사람의 유전자를 기초로, 유전자 재조합법을 통해, 적절한 primer를 이용하여 얻은 섬유아세포 성장인자를 파이브로넥틴 III 형 분절의 9-10 번 도메인에 결합시켜 얻은 복합 단백질을 준비된 임플란트에 표면처리하여 실험군으로 하였고, 표면처리하지 않은 임플란트를 대조군으로 하여, 가토의 좌우 경골에 각각 2 개씩의 임플란트를 식립하였다. 4주 후, 가토를 희생시켜 각 경골 당 한 개의 임플란트에서 뒤틀림 제거력을 측정하였고 나머지 임플란트 식립 부위 에서는 경골을 포함하는 조직표본을 제작하였다. 조직표본상에서 골접촉이 가장 좋은 3 개의 나사산의 길이를 측정하고, 나사와 접촉하는 골의 길이를 측정하여 골-임플란트 접촉도를 구하고, 같은 부위에서 나사산 사이의 면적과 골이 차지하는 면적을 비교하여 골생성률을 얻었다. 실험군과 대조군의 결과는 Student t-test 를 이용하여 신뢰도 95% 수준에서 통계학적 유의성을 검정하였다. 파이브로넥틴과 섬유아세포 성장인자의 복합 단백질로 표면처리된 임플란트와 표면처리를 하지 않은 임플란트는 뒤틀림 제거력에서는 통계적 유의성이 나타나지 않았으나, 골-임플란트 접촉도와 골생성률에서 복합 단백질로 처리된 임플란트가 통계적으로 유의하게 높은 결과를 보였다. 이상의 연구결과로, 섬유아세포 성장인자와 파이브로넥틴 복합 단백질로 처리한 타이태늄 임플란트가 주변 골 형성을 촉진시켜, 골유합을 증진시킴을 알 수 있었다. 따라서, 복합 단백질이 타이태늄 임플란트의 성공률을 높이기 위한 표면개질 물질로 이용될 가능성을 확인할 수 있었다.