• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.11
• /
• pp.202-207
• /
• 2016

An auxiliary real-time train communications system among drivers, train-traffic controllers and field workers is necessary to share hazard information (i.e. rockfall detection, track maintenance) in low visibility zones (long tunnels and steep curved track). To develop the appropriate communication system, this paper proposes a new way of power line communication using the rail track (Rail - PLC), which has little noise and distortion of attenuation. Therefore, it is important to measure the impedance of the rail and to apply an impedance matching technique to increase the transmission characteristic of the Rail - PLC. This study would evaluate the reflection and the transmission characteristics of the rail using a network analyzer and an impedance matching transformer. The suitable impedance matching ratio was 1:3.28 from the result of back-to-back testing. The results confirmed that the transformer can improve the performance of the transmission signal in Rail - PLC using an impedance matching technique.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.734-737
• /
• 2008

This paper presents a new automatic TFT-LCD image quality optimization system. We also have developed new algorithms using 6-point programmable matching technique with reference gamma curve, and automatic power setting sequence. It optimizes automatically gamma adjustment and power setting registers in mobile TFT-LCD driver IC to reduce gamma correction error, adjusting time, and flicker. Developed algorithms and programs are generally applicable for most of the TFT-LCD modules. The proposed optimization system contains module-under-test (MUT, TFT-LCD module), control program, multimedia display tester for measuring luminance and flicker, and control board for interface between PC and TFT-LCD module. The control board is designed with DSP, and it supports various interfaces such as RGB and CPU. Developed automatic image quality optimization system showed significantly reduced gamma adjusting time, reduced flicker, and much less average gamma error than competing system. We believe that the proposed system is very useful to provide high image quality TFT-LCD and to reduce developing process time using optimized gamma-curve setting and automatic power setting.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2000.10a
• /
• pp.695-698
• /
• 2000

본 논문에서는 이미지 데이터 컬러 속성을 기반으로 한 영상 검색 방법을 제안한다. 두 이미지 사이의 유사성을 측정하기 위하여 컬러 히스토그램의 분포 특성을 이미지 데이터베이스 영상과질의 영상에서 계산하여 유사도를 결정하도록 설계하였다. 두 영상의 유사도를 측정하기 위해 두영상의 R, G, B 히스토그램에 대해서 같은 값에 대한 빈도 수의 차를 거리로 측정한 후, 구해진 거리의 차를 비교한 방법과 히스토그램의 분포 곡선을 이루는 방정식을 구한 수 있도록 곡선 정합을 한 후에 두 영상의 컬러 특징 속성에 관한 특징 값의 추출을 위해서 다항식 보간법에 의한 방정식을 이용한 방법을 소개한다. 공간 데이터베이스 시스템에서 질의에 대한 효율적인 처리를 위해 R-Tree와 최대 점을 이용하여 영상을 검색한다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.10b
• /
• pp.514-516
• /
• 2003

고배율 렌즈를 장착한 3차원 비접촉 측정 장비에서 컴퓨터 비전을 이용한 정밀도 높은 형상의 측정을 위해서는 선명한 영상 획득을 위한 정확한 초점 위치 결정이 선행되어야 한다. 본 논문에서는 정초점 위치를 찾기 위하여 수동형 초점 조절 방법을 사용한다. 각각의 렌즈 위치에서의 입력 영상에 대해 초점 위치 추적의 척도가 되는 초점값을 변형된 LoG 방법을 이용하여 측정하고, 측정된 초점값들의 렌즈 위치에 따른 분포 곡선에 대한 가우시안 정합을 적용한 정초점 위치 검색을 통해 최적의 초점 위치를 결정하는 기법을 제안한다.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.38 no.6
• /
• pp.692-702
• /
• 2001

In this paper, a new block-matching algorithm for standard video encoder is proposed. The algorithm finds a motion vector using the increasing SAD transition curve for each predefined candidates, not a coarse-to-fine approach as a conventional method. To remove low-probability candidates at the early stage of accumulation, a dispersed accumulation matrix is also proposed. This matrix guarantees high-linearity to the SAD transition curve. Therefore, base on this method, we present a new fast block-matching algorithm with the slice competition technique. The Candidate Selection Step and the Candidate Competition Step makes an out-performance model that considerably reduces computational power and not to be trapped into local minima. The computational power is reduced by 10%~70% than that of the conventional BMAs. Regarding computational time, an 18%~35% reduction was achieved by the proposed algorithm. Finally, the average MAD is always low in various bit-streams. The results were also very similar to the MAD of the full search block-matching algorithm.

• Journal of Korean Society of Steel Construction
• /
• v.17 no.5 s.78
• /
• pp.511-518
• /
• 2005

The behavior of steel curved bridges is more complicated than straight bridges, thus the analysis, design and construction process of curved bridges require much more attention. In design of curved bridges, the grillage analysis using general structural analysis program or special program is mainly used. Comparative study in coherence between these analytical results and actual behavior of curved bridges has been rarely conducted. To study the behaviour of curved bridges and verify the current design method, field measurements and analyses using general structural analysis program and 3-D refined analysis program were carried out for simple and continuous bridges in this study. The study focused on the behavior of curved steel bridges during construction. Measured and analytical results had quantitative difference mutually, but there were qualitatively similar. Stress variations in transverse direction of flange were observed and grillage analysis models yielded more conservative values than 3-D refined analysis models.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.30 no.1
• /
• pp.60-69
• /
• 2019

In this paper, we deal with forward-looking imaging, and focus on forward-looking synthetic inverse scattering imaging for a vehicle with curved motion. For image formation, time domain correlation(TDC) is used and a 2D image of the ground in front of the vehicle is generated. Because TDC is a technique that implements matched filtering for a space-variant system, it is robust to Gaussian additive noise of measurements. Furthermore, comparison and analysis between images from linear motion and curved motion show that the resolution of the image is improved; however, the entropy of the image is increased owing to curved motion.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.4
• /
• pp.359-365
• /
• 2008

This paper focused on generation of more accurate DEM and analysis of accuracy. For this, we applied suitable sensor modeling technique for each satellite image and automatic pyramid matching using image pyramid was applied. Matching algorithm based on epipolarity and scene geometry also was applied for stereo matching. IKONOS, Quickbird, SPOT-5, Kompsat-2 were used for experiments. In particular, we applied orbit-attitude sensor modeling technique for Kompsat-2 and performed DEM generation successfully. All DEM generated show good quality. Assessment was carried out using USGS DTED and we also compared between DEM generated in this research and DEM generated from common software. All DEM had $9m{\sim}12m$ Mean Absolute Error and $13m{\sim}16m$ RMS Error. Experimental results show that the DEMs of good performance which is similar to or better than result of DEMs generated from common software.

• Journal of Korean Society for Geospatial Information Science
• /
• v.18 no.2
• /
• pp.93-97
• /
• 2010

This paper presents the improved KLT(Kanade-Lucas-Tomasi) of registration of Image sequence captured by camera mounted on unmanned helicopter assuming without camera attitude information. It consists of following procedures for the proposed image registration. The initial interested points are detected by characteristic curve matching via dynamic programming which has been used for detecting and tracking corner points thorough image sequence. Outliers of tracked points are then removed by using Random Sample And Consensus(RANSAC) robust estimation and all remained corner points are classified as inliers by homography algorithm. The rectified images are then resampled by bilinear interpolation. Experiment shows that our method can make the suitable registration of image sequence with large motion.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.04c
• /
• pp.202-204
• /
• 2003

본 논문은 isophote 제약조건을 사용한 유전자 알고리즘(Genetic Algorithms) 기반의 효율적인 오류 은닉 방법을 제안한다. 제안된 방법은 먼저 오류 블록을 경계선 정합 알고리즘(Boundary Matching Algorithm)을 사용하여 오류 블록의 주변과 가장 유사한 블록을 이전 프레임에서 찾아 교체한 후, isophote를 제약조건으로 가진 유전자 알고리즘을 사용하여 교체된 오류 블록을 재구성하는 것이다. Isophote들은 영상에서 일정한 밝기 값을 가지는 곡선들로, 본 논문에서는 비디오 통신 시 화질을 개선하기 위해, 전송 오류에 의한 끊어진 isophote들을 부드럽게 연결한다. 끊어진 isophote들을 연결하기 위해, isophote를 제약조건으로 가진 적합도 함수를 최소화하는 픽셀 값을 유전자 알고리즘을 사용하여 추정하고, 그 값을 isephote 방향으로 투영한다. 실험 결과, 제안된 방법이 다른 오류 은닉 방법 보다 좀 더 화질을 개선시킬 수 있다.