• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.4C
• /
• pp.231-238
• /
• 2008

A column testing device capable of measuring the electrical resistivity of soil at 3 different locations was developed to verify applicability of bulk electrical conductivity (BEC) breakthrough curves in monitoring contaminant transport. Tracer injection tests were conducted with three different types of saturated sands to obtain average linear velocities and longitudinal hydrodynamic dispersion coefficients based on BEC breakthrough curves and effluent solute breakthrough curves. Comparative analysis of transport parameters obtained from curve fitting the results into the analytical solutions confirmed the validity of resistance measurements in estimating time-continuous resident solute concentration. Under the assumption that a linear relationship exists between ${\sigma}_{sat}-{\sigma}_w-C$, the BEC breakthrough curves are able to effectively reduce the laborious and time-consuming processes involved in the conventional method of sampling and analysis. In order to reduce possible uncertainties in analyzing the BEC breakthrough curves, it was recommended that resistance measurements take place nearby the effluent boundary. In addition, a sufficient electrical contrast or difference in the electrical conductivity of the influent and the saturating solution is required to conduct reliable analysis.

• The Transactions of the Korea Information Processing Society
• /
• v.5 no.9
• /
• pp.2388-2394
• /
• 1998

Methods of enerating curves through a polygon are proposed. One is minimizing the sum of second order discontinuities of curve segments shile satisfying the first order continuities. The other is minimizint the energy consumption under the viscosity resistance while satisfying the first order continuities.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.1
• /
• pp.53-63
• /
• 1988

Using COD-R curves, instability of crack growth in ductile material is studied here. Tearing modulus $T_{\delta}$, based on the COA concept is defined and the instability criterion $T_{{\delta}{\app}}$> $T_{{\delta}{\mat}}$ is compared with experiments. Variations of the COD-R curve and the location of rotation center are experimentally investigated as the initial crack ratio varies. Three-point bend specimens of alloy steel SCM4 are used here and two clip-on gauges are installed in order to obtain the COD-R curve. The results show that the tearing modulus $T_{\delta}$ is a good measure to characterize the instability of crack growth. Also it is found that the location of rotation center is almost constant regardless of the initial crack ratio and the amount of the crack growth.

• Journal of the Korean Magnetics Society
• /
• v.4 no.4
• /
• pp.340-346
• /
• 1994

Change in the electrical resistance of artificial superlattice under two magnetic fields-the main and the secondary magnetic field-has been studied with respect to each magnetic field strength in (200) textured Co/Cu artificial superlattice. When the two magnetic fields were applied in the same direction, lateral shift of the magnetoresistance curve occurred, while splitting phenomenon of the maximum resistance appeared when the two magnetic fields were applied at the right angle. When the angle between the two magnetic fields became $45^{\circ}$ shifting as well as splitting occurred in the magnetoresistance curve. This magnetoresistance behavior with double magnetic fields in the artificial superlattices could be explained with the macroscopic spin alignment model newly suggested in this work.

• Proceedings of the KSME Conference
• /
• 2001.06d
• /
• pp.985-988
• /
• 2001

Revision and establish of KS(Korean Standards) is currently actively discussed. It is just the time for a new world class standards under the new system with WTO(World Trade Organization). This paper is a part of "Researchs on the Standards in Railway rolling stock Field", as one of KS establish projects. The aim of this study is to define the requirements of railway rolling stock-test methods for running resistance. In the former KS, there is no items matched with this purpose. Therefore a new part of KS is proposed.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.05b
• /
• pp.681-687
• /
• 1995

316LN 스테인레스강의 예민화 특성에 미치는 합금성분의 영향을 분석하기 위해 4종류의 다른 조성을 갖는 합금을 제조하여 Oxalic 시험, Modified Strauss 시험 그리고 DL-EPR 시험을 수행하여 각 시험조건에서의 예민화 특성을 관찰하였다. 실험결과, 짙소 첨가는 예민화 저항성을 증가시키나 그 정도는 미약하여, 0.16 % 질소 첨가강의 예민화 곡선에서 꼭지점은 75$0^{\circ}C$, 3 시간에 위치하였다. 반면, Ti과 B 첨가는 316LN강의 예민화 거동에 매우 큰 영향을 미치며, 0.03 % Ti 및 0.0036 % B 첨가강의 예민화 곡선에서 꼭지점은 14 시간까지 나타나지 않았다. Effective Cr량과 예민화 저항성과의 관계를 경험적으로 표현한 여러가지 관계식에 4종류의 스테인레스 강을 적용시켜 본 결과 기존의 식으로는 Ti 및 B 첨가강에서 발생한 현저한 예민화 저항성 증가를 선명할 수가 없었다. Ti과 B의 성분을 고려한 새로운 관계식이 제안되어야 할 것으로 사료된다.

• 전기의세계
• /
• v.9
• /
• pp.36-39
• /
• 1962

직류기정류이론은 Arnold, Langsdorf등에 의하여 연구되어 왔으며, 이들은 정류방정식에서 정류주기중의 전류의 시간적변화와 정류주기종단에서 전류의 시간적 변화율의 값에 의하여 spark 발생여부를 판별하여 정류량부를 판별하였다. 본 논문은 상기한 방법과는 달리 정류의 기본방정식에서 정류곡선의 일반식을 구하고 정류곡선을 해석하여 정류양부를 판별하는 것이며, 정류주기중에 있는 단종선론의 coil저항과 연접한 극(pole)아래의 Brush에 의한 단각전류의 상호유도작용까지도 고려하였을때의 정류곡선의 일반식을 구하고 이를 해석하여 Langsdorf에 의하여 연구된 정류판별의 결과를 비교하여 정류판별에 대한 차이점과 명확한 결론을 제시코저 한다.

• Journal of the Korean Society for Railway
• /
• v.17 no.3
• /
• pp.165-170
• /
• 2014

The resistance to motion of the Korean next-generation high-speed train (HEUM-430X) was assessed on the basis of 12 coasting test runs at coasting speeds up to approximately 380km/h. Two different methods, a linear regression method and a time-integral method, were employed to calculate decelerations from the time-velocity data and the time-distance data, respectively, and an equation of resistance to motion was devised from the deceleration data calculated at each time section. The effect of an improvement of the aerodynamic shape on the resistance to motion was investigated, with the results showing that the running resistance was reduced by about 15% due to these improvements. An increase of approximately 28% of the running resistance was also noted when running in a tunnel relative to running through an open field.

• Journal of Korean Society of Transportation
• /
• v.19 no.6
• /
• pp.119-129
• /
• 2001

본 연구는 국내의 화물차(이하 트럭) 특성, 도로 조건과 주행 저항이 고려된 트럭 성능 곡선 산출식의 매개변수를 추정하기 위하여 수행되었다. 이를 위해 국내 대표트럭을 선정하고 경사지 진입속도를 산출하였다. 국내 대표트럭의 선정은 자동차 등록현황 자료를 토대로 하여 트럭 중량/마력비에 대한 누적 분포를 작성하고 이 중에서 주요 차종(적재 중량 11톤 이상)의 총중량은 과적 검문소 자료로 보정하여 이루어졌다. 경사지 진입속도는 도별 평지부 직선 구간을 한 곳씩 선정하여 4차로도로와 2차로도로에서 수집되는 자료를 분석하여 산출하였다. 트럭 성능 곡선 산출식을 정립하기 위해 오르막 한계속도$(V_x)$ 산출식을 정리한 뒤 총중량(W), 엔진성능(P), 경사도(G)는 독려 변수로 k, $f_{rc}$, $f_{rv}$, $\Phi$는 매개변수로 설정하였다. 현장조사를 통해서 오르막 한계속도에 도달한 트럭의 총중량과 엔진성능, 속도, 경사도 등의 자료를 수집하여 매개변수 산출에 이용하였다. 마지막으로 추정된 매개변수를 이용하여 트럭 성능 곡선을 도출하였다.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.31 no.4
• /
• pp.340-349
• /
• 1995

There are several problems in a fishing by the midwater pair trawl net which is used in Denmark; steeply decreasing of the net height with the towing speed increasing, the larger volume of the fishing gear in comparison with the size of the trawler, and catching of a float in a mesh, etc. To prevent steeply decreasing of the net height with the towing speed increasing and catching of a float in a mesh, it is sometimes more useful to use the kite instead of floats. This paper describes the hydrodynamic drag and the opening efficiency of the midwater pair trawl net and the midwater kite pair trawl net obtained by the model test in the circulation water channel. The results can be summarized as follows; 1. The hydrodynamic drag of the midwater kite pair trawl net is about 0.7 times smaller than that of the midwater pair trawl net. 2. The net height, mouth area and filtering volume of the midwater kite pair trawl net are smaller then those of the midwater pair trawl net when the towing speed is below 2.5knots, almost the same at 2.7knots, and are larger over 3.0knots. The net width of the midwater kite pair trawl net is same as that of the midwater pair trawl net. 3. The shapes of net mouth of both net are an oval steeply flatted with the towing speed increasing. The filtering volume of the midwater kite pair trawl net is larger then that of the midwater pair trawl net by 3% at 3.0knots, 11% at 4.0knots, and 16% at 5.0knots respectively.