• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.237-240
• /
• 2008

Today, some bridges or highways are becoming superannuated in Korea. Also, in this section, rehabilitation, replacement and expansion are necessary to increasing traffic volumes these days. Bridge reconstruction is major problem because it has relation to civil application, economical loss and loss of vehicles made a detour while this work. Many precast components and methods of construction are developed for this issue. Many research of various precast components and new materials are being performed owing to apply to prefabrication bridges. The present paper represents experimental studies on the performance of precast CFFT pier model. Also, stay-in-place RC pier and stay-in-place CFFT pier are made an experiment on due to comparing test results. Hysteretic responses of all columns are obtained through the test. Compared with the displacement ductility factors, conclusions of seismic performances can be made.

• Journal of the Korean Society of Safety
• /
• v.25 no.6
• /
• pp.115-122
• /
• 2010

The importance of the life cycle cost (LCC) analysis for bridges has been recognized over the last decade. However, it is difficult to predict LCC precisely since the costs occurring throughout the service life of the bridge depend on various parameters such as design, construction, maintenance, and environmental conditions. This paper presents a methodology for the optimal life cycle cost design of a bridge. Total LCC for the service life is calculated as the sum of initial cost, damage cost, maintenance cost, repair and rehabilitation cost, user cost, and disposal cost. The optimization method is applied to design of a bridge structure with minimal cost, in which the objective function is set to LCC and constraints are formulated on the basis of Korean Bridge Design Code. Initial cost is calculated based on standard costs of the Korea Construction Price Index and damage cost on damage probabilities to consider the uncertainty of load and resistance. Repair and rehabilitation cost is determined using load carrying capacity curves and user cost includes traffic operation costs and time delay costs. The optimal life cycle cost design of a bridge is performed and the effects of parameters are investigated.

• Journal of the Society of Naval Architects of Korea
• /
• v.36 no.4
• /
• pp.87-94
• /
• 1999

Empirical design is still used to avoid a structural damage because impact phenomenon and structural behaviour due to wave impact load can not examined accurately. The damage due to wave impact load is largely affected by impact pressure impulse and impact load area. The objective of this study is, as the second step, to develop an efficient scantling program of bow flare structure, and to predict its impact load area by comparing maximum dented deformations at center of idealized panel structure model of bow flare structure of 300k DWT VLCC using LS/DYNA3D code, which will be used for its verification of dynamic structural analysis, as the next step. Through this study, the impact load area was estimated as $1.5s{\times}1.5s$ stiffener space(s) in the case of panel with stiffeners and as $2.5s{\times}2.5s$, with stringers, under impact pressure curve with peak height 6.5MPa, tail height 1.0MPa, and duration time 5.0msec.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.6
• /
• pp.719-730
• /
• 2007

This study presents a thin-walled space frame element based on the classical Timoshenko beam theory. The element is derived according to the assumed strain field in order to resolve the shear-locking phenomenon. The shape function is developed in accordance with the strain field which is assumed to be constant at a 2-noded straight frame element. In this study, the geometrically nonlinear analysis applies the Corotational procedure in order to evaluate unbalanced loads. The bowing effect is also considered faithfully. Two numerical examples are given; monosymmetric curved and nonsymmetric straight cantilever. When these example structures behave lateral-torsional bucking, the critical loads are obtained by this study and ABAQUS shell elements. Also, the post-buckling behavior is examined. The results give good agreement between this study and ABAQUS shell.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.32 no.6
• /
• pp.417-423
• /
• 2019

In this investigation, a set of seismic fragility curves for RC bridges in Korea is derived by considering variations of the representative analytical model. The dimensions and specifications of the model are determined, based on statistical analysis of the inventory of RC bridges in Korea. Variations of important modeling parameters such as material properties, size of structural members, and dimension of the bridge are defined based on statistical studies of the bridges. The OpenSees program is utilized for the analysis to represent the inelastic behavior of RC members. A systematic approach is developed to perform a large volume of inelastic dynamic analysis, in which continuous variation of the modeling parameters are programmed to appropriately represent the characteristics of RC bridges in Korea.

• Journal of Korean Society of Transportation
• /
• v.20 no.7
• /
• pp.59-67
• /
• 2002

2001년 경찰청 $\ulcorner$2001년판 교통사고통계$\lrcorner$ 자료에 의하면 사고피해의 정도를 나타내는 치사율에 있어서 중앙선침범사고가 과속사고와 함께 가장 높은 수치를 보이고 있으며, 대형 교통사고의 39.5%가 중앙선 침범에 의해 발생한 것으로 나타났다. 실제로 2000년 한 해 동안 총 사고건수 290,481건 중 중앙선 침범에 의해 18,931건 (6.52%)의 교통사고가 발생하여 사망자 1,472명, 부상자 35,046명으로 전체 교통사고 사망자의 14.38%, 부상자의 8.21%를 점하고 있는 것으로 나타났다. 이와 같이 전체 교통사고에서 중앙선침범사고가 차지하는 비중 이 높아지고 있어 중앙선침범사고를 줄이기 위한 대책의 일환으로 중앙분리대, 표지병, 시선 유도봉 등과 같은 중앙선침범 예방시설물을 설치하고 있으나, 해당 시설물에 대한 설치기준이 없는 실정이다. 이렇듯 중앙분리대 설치기준의 부재로 인해 중앙선침범사고 발생과 이에 따르는 경제적인 교통사고 비용손실, 그리고 중앙분리대의 과다설치로 인한 국가 재원의 낭비는 간과할 수 없는 문제점을 내포하고 있다. 이러한 점에 착안하여 기존에 지방부 2차로 도로의 직선부에 대한 중앙선침범사고 예측모델이 개발되었고 본 연구에서는 그 연장선상에서 지방부 2차로 도로의 곡선부에 대한 중앙선침범사고 예측모델에 대한 중앙선침범사고 예측모델의 개발을 통해 중앙선침범사고에 대한 사회적 비용을 산정하고, 현재 설치하여 운영중인 중앙선침범 예방시설물의 설치비용간의 비용-편익분석을 통해 얻어진 기준으로 중앙선침범 예방시설물 설치의 가부에 대한 보다 현실적이고 비용-효율적인 중앙선침범 예방시설물 설치기준을 제시함으로써 교통사고 비용손실을 최소화하고, 중앙분리대의 효율적 설치방안의 도입을 통한 경제적 이익창출을 도모하고자 한다.

• Journal of Korean Society of Transportation
• /
• v.20 no.7
• /
• pp.87-94
• /
• 2002

2001년 경찰청 $\ulcorner$2001년판 교통사고통계$\lrcorner$ 자료에 의하면 사고피해의 정도를 나타내는 치사율에 있어서 중앙선침범사고가 과속사고와 함께 가장 높은 수치를 보이고 있으며, 대형 교통사고의 39.5%가 중앙선 침범에 의해 발생한 것으로 나타났다. 실제로 2000년 한 해 동안 총 사고건수 290,481건 중 중앙선 침범에 의해 18,931건 (6.52%)의 교통사고가 발생하여 사망자 1,472명, 부상자 35,046명으로 전체 교통사고 사망자의 14.38%, 부상자의 8.21%를 점하고 있는 것으로 나타났다. 이와 같이 전체 교통사고에서 중앙선침범사고가 차지하는 비중 이 높아지고 있어 중앙선침범사고를 줄이기 위한 대책의 일환으로 중앙분리대, 표지병, 시선 유도봉 등과 같은 중앙선침범 예방시설물을 설치하고 있으나, 해당 시설물에 대한 설치기준이 없는 실정이다. 이렇듯 중앙분리대 설치기준의 부재로 인해 중앙선침범사고 발생과 이에 따르는 경제적인 교통사고 비용손실, 그리고 중앙분리대의 과다설치로 인한 국가 재원의 낭비는 간과할 수 없는 문제점을 내포하고 있다. 이러한 점에 착안하여 기존에 지방부 2차로 도로의 직선부에 대한 중앙선침범사고 예측모델이 개발되었고 본 연구에서는 그 연장선상에서 지방부 2차로 도로의 곡선부에 대한 중앙선침범사고 예측모델에 대한 중앙선침범사고 예측모델의 개발을 통해 중앙선침범사고에 대한 사회적 비용을 산정하고, 현재 설치하여 운영중인 중앙선침범 예방시설물의 설치비용간의 비용-편익분석을 통해 얻어진 기준으로 중앙선침범 예방시설물 설치의 가부에 대한 보다 현실적이고 비용-효율적인 중앙선침범 예방시설물 설치기준을 제시함으로써 교통사고 비용손실을 최소화하고, 중앙분리대의 효율적 설치방안의 도입을 통한 경제적 이익창출을 도모하고자 한다.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.10
• /
• pp.101-108
• /
• 2021

In this paper, we analyze Shin's proposed dynamic ID-based user authentication scheme for TMIS(Telecare Medicine Information System), and Shin's authentication scheme is vulnerable to smart card loss attacks, allowing attackers to acquire user IDs, which enables user impersonation attack. In 2019, Shin's proposed authentication scheme attempted to generate a strong random number using ECC, claiming that it is safe to lose a smart card because it is impossible to calculate random number r'i due to the difficulty of the ECC algorithm without knowing random number ri. However, after analyzing Shin's authentication scheme in this paper, the use of transmission messages and smart cards makes it easy to calculate random numbers r'i, which also enables attackers to generate session keys. In addition, Shin's authentication scheme were analyzed to have significantly greater overhead than other authentication scheme, including vulnerabilities to safety analysis, the lack of a way to pass the server's ID to users, and the lack of biometric characteristics with slightly different templates.

• Journal of Conservation Science
• /
• v.36 no.6
• /
• pp.483-493
• /
• 2020

In this paper, we present a nondestructive analysis using X-ray and microscopic investigation to detect the structure, manufacturing technique and preservation status of the Goryeo lacquered box Inlaid with Mother-of-pearl Chrysanthemum and Scroll Design (Goryeo Lacquered Box). We confirm that the Goryeo Lacquered Box consists of the soft wood as the basic material. The soft wood was coated with textile and then lacquered. The box structure of the Goryeo Lacquered Box was formed of wooden boards with wood plants added to the side, after processing into a trefoil-shaped. The wooden sides of the Goryeo Lacquered Box were cut at regular intervals for easier processing into a curved shape. Moter-of-pearl, tortoiseshell, and metal wire were used to decorate the surface. mother-of pearl was the cutting processing, and tortoiseshell was used for back coloring. The metal line was constructed using one line and twist line.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.3
• /
• pp.201-208
• /
• 2021

In this paper, the effect on the lateral and torsional behavior of ballastless railway plate girder bridge by the installation of the lower horizontal bracing has been reviewed. First of all, the most efficient lower bracing arrangement has been reviewed by comparing and examining the lateral displacement due to the train load, targeting analysis models with different arrangement types of lower bracing. Next, the research on torsional behavior of plate girder bridge with lower bracing has been conducted. In addition, the torsion constant from FEM analysis results has been compared with the torsion constant of a railroad plate girder bridge with a closed section by substituting the upper and lower horizontal bracing with equivalent thickness. Based on this comparison, the impact on the bridge span length and the cross section area of the lower bracing has been examined. Through this study, the curve graph related to lateral buckling moment and torsional constant ratio is presented and the range of plate girder bridge requiring torsional reinforcement is proposed.