• CDE review
• /
• v.3 no.3
• /
• pp.57-60
• /
• 1997

기계 부품을 설계함에 있어 솔리드 모델링 시스템의 사용을 골격으로 하는 CAD 시스템의 사용은 삼차원 모델링된 단일 물체에 대한 물성치(mass property)의 계산, FEM 해석을 위한 유한요소의 자동생성, 곡면에 대한 NC 공구경로(NC tool path)의 자동계산, 부품의 생산을 위한 가공 정보의 도출 등의 분야에 많은 도움을 주어 설계와 생산, 관리의 전 분야에 혁신적 효율화를 도모해주었다. 한편 이렇게 설계된 단품들은 대개의 경우 조립되어 조립체를 이루게 되고, 그 상태로 혹은 부품간에 상대운동을 하면서 원하는 기능을 구현하게 된다. 단품에 대해서처럼 이 과정에서도 CAD 시스템은 조립체의 삼차원 형상을 인식하고 필요한 정보를 제공해줌으로써 설계자에게 유용한 도구로 사용될 수 있는데 이를 조립체 모델링 시스템(Assembly Modeling System)이라 부르며, 현재에는 대부분의 솔리드 모델링 시스템에 그 기능이 채택되어 있다. 조립체 모델링에 관한 연구동향을 비교적 잘 정리한 문헌으로는 Turner와 Libardi의 것을 들 수 있다. 여기서는 이러한 조립체 모델링 시스템의 연구분야와 동향에 대해 또 나름으로의 시각으로 정리하였다.

• The Journal of Engineering Geology
• /
• v.8 no.2
• /
• pp.131-143
• /
• 1998

The study area, Beulgok-myon Nonsan-goon Chungcheongnan-do is consist of Changri slate(Och, okcheon system), lithic tuff(Kslt, kyoungsang system), granite (Kqb, kyoungsang system) and quartz porphyry(Kgf, kyoungsang system). More than 3000 joints were measured and classified by direction. Main dipdirection/dips of Kqb are 228~257/73~88, 010~150/70~85, Och are 134~164/40~90, 214~249/55~89, Kslt are 291~332/75~82, 235~241/73~71. But Kgf are not appeared distinct directions of joint. In field, p-wave velocities(Vp) are measured on the bed rock. Vp of Kgf are $5000m(240^{\circ})~2380(360^{\circ})m/s$, Kqb are $3846(210^{\circ})~1408(150^{\circ})m/s$, Kslt are $5000(360^{\circ})~2323(150^{\circ})m/s$ and Och are $6657(180^{\circ})~2000(030^{\circ})m/s$. Also P-wave velocities on specimen are measured. It is slightely higher than it's measured on the bed rock. For engineering properties of rock, we measured Poisson's ratio, rigidity, Young's modulus and bulk modulus by dynamic method.

• Spatial Information Research
• /
• v.19 no.2
• /
• pp.29-36
• /
• 2011

This study performed quantitative assessment of the performance of adjustment models by a-priori analysis of the statistics of the surface parameter estimates against modeling factors. Lidar, airborne imagery, and SAR imagery have been used to acquire the earth surface elevation, where the shape properties of the surface need to be determined through neighboring observations around target location. In this study, parameters which are selected to be estimated are elevation, slope, second order coefficient. In this study, several factors which are needed to be specified to compose adjustment models are classified into three types: mathematical functions, kernel sizes, and weighting types. Accordingly, a-priori standard deviations of the parameters are computed for varying adjustment models. Then their corresponding confidence regions for both the standard deviation of the estimate and the estimate itself are calculated in association with probability distributions. Thereafter, the resulting confidence regions are compared to each other against the factors constituting the adjustment models and the quantitative performance of adjustment models are ascertained.

• Progress in Medical Physics
• /
• v.21 no.1
• /
• pp.86-92
• /
• 2010

The purpose of this study was to measure curvature contour skin dose using radiochromic film and TLD for a conventional open field. We also attempted to quantify the degradation of skin sparing associated with use of immobilization devices for high energy photon beams and to calculate the skin dose with a help of Monte Carlo (MC) simulation. To simulate head-and-neck and shoulder treatment, a cylindrical solid water phantom 11 cm in diameter was irradiated with 6 MV x-rays using $40{\times}40\;cm^2$ field at 100 cm source axis distance (SAD) to the center of the phantom. Aquaplastic mesh mask was placed on the surface of the cylindrical phantom that mimicked relevant clinical situations. The skin dose profile was obtained by taking measurements from $0^{\circ}$ to $360^{\circ}$ around the circumference of the cylindrical phantom. The skin doses obtained from radiochromic film were found to be 47% of the maximum dose of $D_{max}$ at the $0^{\circ}$ beam entry position and 61% at the $90^{\circ}$ oblique beam position without the mask. Using the mask (1.5 mm), the skin dose received was 59% at $0^{\circ}$ incidence and 78% at $80^{\circ}$ incidence. Skin dose results were also gathered using thin thermoluminescent dosimeters (TLD). With the mask, the skin dose was 66% at $0^{\circ}$ incidence and 80% at $80^{\circ}$ incidence. This method with the mask revealed the similar pattern as film measurement. For the treatments of the head-and-neck and shoulder regions in which immobilization mask was used, skin doses at around tangential angle were nearly the same as the prescription dose. When a sloping skin contour is encountered, skin doses may be abated using thinner and more perforated immoblization devices which should still maintain immoblization.

• Korean Journal of Remote Sensing
• /
• v.28 no.5
• /
• pp.549-559
• /
• 2012

This paper presents a comparative analysis on the applicability of a priori statistic information about adjustment models when the surface shape parameters are estimated at an arbitrary point in an elevation data. Although the reliability of the estimates are known to be affected by surface condition and the adjustment models, there has been little research in a systematic and detail way. When the raw data have been taken from a real measurement, its true value cannot be known, however, thus this study used simulation data in order to analyze clearly the applicability of adjustment models. The generation of simulated data was performed by superimposing horizontal, slope, and curve surfaces and adding a certain amount of noise. Comparative analysis was performed by associating the a posteriori estimates with a priori statistics of each adjustment models. The experimental results show the estimation characteristics of adjustment models against varying surface conditions.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.16 no.2
• /
• pp.129-140
• /
• 2013

This study reviewed different results according to the selection of viewpoints and considerations of the neighborhood in the analysis of view to regulate the height of buildings. To do this, 4 cases were set according to the analytical methodology and a GIS simulation was performed. Characteristics of each methodology were compared and analyzed by simulated values with ANOVA(analysis of variance) and post-hoc analysis. First, the method using moving viewpoints was found to be appropriate for the regulation of building height as it could reflect basic characteristics of landscape which was sequential and it did not show big difference in analysis result according to situational setting. Second, the method using grid viewpoints showed a problem that viewpoints at left and right sides viewed ridges of other mountains than the background mountains of the target land. Additionally, the simulation method that induces three-dimensional cross-sections between multiple sight-surface and virtual construction points created at viewpoints used in this study was found to be useful in the simulation review with various settings as it induced the marginal height of the spot quantitatively.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.3
• /
• pp.299-305
• /
• 2010

In general, the flexible forming die that has been used in the flexible forming process has the identical punch size; hence, its flexibility is relatively low because the range of allowable curvature radii is limited due to the uniform punch tip radius. Hence, a conceptual design of a sectional flexible die is presented for enhancing the flexibility of the forming process. Two punches of different sizes are used to configure the arbitrary forming surface. For a forming region with a relatively large curvature radius, a large punch array block is used; on the other hand, for the forming regions with small curvature radii, a small punch block is used. The cross-sectional profiles are compared with the target shape for evaluating the effectiveness of the process. Consequently, it is confirmed that the sectional flexible die can be used along with a combination of punch blocks of different sizes for manufacturing objective surfaces of complex shapes.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.5
• /
• pp.1202-1207
• /
• 1993

An optical method of slit beam scanning topography is presented for the 3-dimensional profile measurement of free-formed surfaces. A slit beam of laser is projected in a scanning mode and its illuminated trajectory on the object is captured by using a CCD camera. The 3-dimensional coordinates of the trajectory is then computed by using the given geometry between the slit beam and the camera, so that the whole surface profile of the object can be obtained in a successive manner. Detailed optical principles are described with special emphasis to lateral are discussed to demonstrate the measuring performances of the slit beam scanning topography proposed in this study.

• Journal of the Korean earth science society
• /
• v.31 no.6
• /
• pp.555-562
• /
• 2010

Three-dimensional laser scanner was used to accurately measure any possible strain on a slope under pertaining stress with the time difference of 7 months. The laser scanner has the ability to measure the 3-D coordinate of a target point by calculating the travel time of laser beam between the laser device and the target point, and has been proved to be effective for analysis of the displacement of slopes or large construction. The scanning data measured with time difference were analyzed to find any strain by approaches of plane angle change, curvature variation, twist of frame, displacement of merging point, etc. From the analysis, some weak points showing heavily distorted shape were detected, which was used to design the reinforcement.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1995.04a
• /
• pp.617-628
• /
• 1995

본 논문에서는 상용화된 이 기종 CAD/CAM 시스템간의 CAD 데이타 교환기능을 가지는 IGES Translator 시스템의 구조를 제안한다. 제품생산의 여러 단계에서 CAD/CAM의 사용이 보편화되어감에 따라 상용 CAD/CAM 시스템들은 응용분야에 맞는 특수한 도구로 사용되는 경향이 생겨났다. 예를 들어, ALIAS는 주로 스타일링 디자인에, I-DEAS와 PRO/ENGINEER는 엔지니어링 디자인에, EUCLID는 금형 디자인에, 그리고 OMEGA와 Z-MASTER는 NC 공구경로생성에 주로 사용되고 있다. CAD 데이타 교환을 위해 제안된 중립파일형식(Neutral File Format)중에서, IGES(Initial Graphics Exchange Specification)는 대부분의 상용 CAD/CAM 시스템에서 지원을 하고 있으며 가장 널리 쓰이는 파일형식이다. 그런데, IGES를 통한 CAD 데이타 교환은 다음과 같은 문제점들을 가지고 있다. 즉, patch의 사라짐, 경계곡선의 왜곡, patch의 overlap 또는 gap, trimming error, 곡면각의 꺾임각도 등이 그것이다. 이 논문의 목적은 이러한 문제점들을 해결할 수 있는 범용 IGES Translator를 개발하는데 있다. 이 논문의 주요한 기여 내용은 다음과 같다. 1) 주요 상용 CAD/CAM 시스템의 IGES Interface 기능의 비교 분석, 2) 주요 상용 IGES Translator의 기능 분석, 3) 사용자의 기능적 요구사항의 분석, 4) 사용자 관점 및 시스템 관점에서의 IGES Translator의 구조 제안, 5) Prototype IGES Translator의 개발 및 테스트 결과 제시.