• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.218-218
• /
• 2011

2중곡면 반파공의 월파 특성을 검토하기 위하여 입사파고 및 주기가 각각 다른 불규칙파를 대상으로 수리실험을 실시하였으며, 2중곡면 반파공과 직립형 구조물에 대해 동일한 조건으로 실험하여 이를 명확히 하였다. 특히 2중곡면 상부의 곡률반경에 따라 외해측으로 되돌리는 파랑의 비말효과에서 큰 차이가 있을 것에 착안하여 상부곡면부의 곡률반경이 증가한 정상 2중곡면 반파공(FSW)과 상부곡면부의 곡률반경이 감소한 역 2중곡면 반파공(IFSW)에 대해 실험을 수행하였다. 그리고 2중곡면 원호 크기의 비 B/D=0, 20%, 40%, 60% 및 80%인 경우에 대해서도 월파특성을 비교 검토하여 다음과 같은 결론를 얻었다. 1. 2중곡면 원호 크기의 비 B/D가 증가할수록 월파저지 효과가 개선됨을 확인 하였으며 최대 B/D가 0.8인 경우 0.2에 비해 50% 이상 월파유량이 감소하여 B/D의 변동에 따른 월파저지특성을 확인하였다. 2. 역2중곡면 반파공(IFSW)의 실험결과 기존 정상2중곡면 반파공(FSW)에 비하여 20%이상 월파량이 감소하고 있음을 알 수 있었으며 이는 2중곡면 상부측의 곡률 반경이 증가함에 따른 기하학적 특성에 의해 외해측으로의 되돌림 파랑(수괴)이 증가한 것으로 판단된다. 3. 동일한 마루높이에 대해 직립형 호안에 의한 월파량 비교결과 역 2중곡면 반파공(IFSW)의 경우 최대 80%이상의 월파량 저감 효과가 나타나는 것으로 검토되었다. 4. 월파저지의 측면에서 2중 곡면공에 비해 역2중 곡면공이 우수한 것으로 예측되었으나 2중곡면 반파공의 소파원리가 반파공의 원호내에서 쇄파를 야기하여 파에너지를 소멸하는 것이므로 쇄파를 유도하는 과정에서 충격쇄파압의 발생이 예측되는 바 이에 대한 계속적인 연구가 필요한 것으로 판단된다.

• Journal of KIISE:Computer Systems and Theory
• /
• v.32 no.8
• /
• pp.411-417
• /
• 2005

We present a method to reconstruct a canal surface from a point cloud (a set of unorganized points). A canal surface is defined as a swept surface of a moving sphere with varying radii. By using the shrinking and moving least-squares methods, we reduce a point cloud to a thin curve-like point set which can be approximated to the spine curve of a canal surface. The distance between a point in the thin point cloud and a corresponding point in the original point set represents the radius of the canal surface.

• Journal of the Korea Computer Graphics Society
• /
• v.7 no.3
• /
• pp.1-7
• /
• 2001

We present an efficient and robust algorithm to parametrize a perspective silhouette curve of a canal surface. We also detect each connected component of the silhouette. A canal surface is an envelope surface of a moving sphere with varying radii, which is defined by the center trajectory C(t) and radius function r(t) of the moving sphere. A canal surface can be decomposed to a set of characteristic circles. We derive the equations for the silhouette points on each characteristic circle, then parameterize the silhouette curve by using the equation. The sphere $S(t_*)$ with center point $C(t_*)$ and radius $r(t_*)$ intersects with the canal surface at a characteristic circle $K(t_*)$. The perspective silhouette of the sphere $S(t_*)$ from given view point consists of a circle $Q(t_*)$. By finding the values of t at which K(t) and Q(t) tangentially intersect, we detect each connected component of the silhouette curve.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1993.10a
• /
• pp.47-51
• /
• 1993

볼랜딩 하는 것은 모든제품의 다양한 형상을 얻어내는데 필수적이라 할 수 있다. 여기에서는 볼랜딩하는 방법에 있어서 형상의 변화가 쉽고 간결하게 할 수 있는 새로운 방법으로서 교차곡선을 구한 후 교차곡선을 따라가며 꼬이지 않는 평면을 설정하여 작업자에 의하여 주어지는 반경과 조정점의 위치를 조정하는 방법으로 볼랜딩하는 방법을 제시한다. 본 논문에서는 자유곡면과 자유곡면의 볼렌딩,자유곡면과 다면체곡면의 볼랜딩하는 방법을 제시한다.

• Journal of Energy Engineering
• /
• v.22 no.2
• /
• pp.105-111
• /
• 2013

The present study has been carried out to reduce the heat loss from a built in refrigerator by using reverse heat loss method to discern the region with larger heat loss. To perform this purpose, an infrared thermographic camera has been used to measure the surface temperature of the refrigerator and tried to improve the heat loss near the ice dispenser. The numerical heat transfer analysis also has been accomplished to clarify the heat transfer mechanism near the ice dispenser. The possible applicable method to reduce heat loss was increasing the curvature radius at the ice dispenser corner. The curvature radius has been changed from 0mm to 40mm to see the effect of the curvature at the corner. From the present research, the optimal curvature radius for the reduction of heat loss at the ice dispenser could be 30mm.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.1
• /
• pp.239-244
• /
• 2016

The polarization characteristics of polarization-insensitive directional coupler based on double sandwiched rib-type and curved waveguides are explored in detail by using conformal transformation method (CTM) and longitudinal modal transmission-line theory(L-MTLT). To obtain the polarization-insensitive condition of polarization-insensitive curved directional coupler(PI-CDC), the coupling length and coupling efficiency according to the inner radius of PI-CDC are analyzed for quasi-TE and quasi-TM modes. The numerical results show that the PI-CDC with a few micrometer scales can be realized by properly choosing the curvature and structural and material parameters of double sandwiched layers. Furthermore, the mode profiles propagating through PI-CDC are evaluated, and the influence on coupler performance has been investigated.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.3
• /
• pp.231-236
• /
• 2015

Investigations into cavity flows have been conducted for decades now, most of them being about zero-pressure-gradient flows entering a cavity on a straight wall. However, the flow over curved walls in real-life situations has not been fully investigated. As cavity flows on curved walls exert centrifugal force, these walls are likely to possess different features from straight walls. To verify this possibility, this study investigated cavity flows on curved walls. Using numerical method, the effect of two variables, namely, radius of curvature on a curved wall and inlet Mach number, were investigated for subsonic and supersonic cavity flows. The result demonstrates that the value of the peak pressure generated inside the cavity increases with the decrease in the radius of curvature on a curved wall or an increase in the inlet Mach number. The total pressure loss in the cavity also results in an increase in the cavity drag.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.62-62
• /
• 2004

최근 신소재인 선진 복합 재료 중 탄소 섬유 강화 플라스틱(이하 CFRP라고 한다. )은 비강도, 비강성이 높기 때문에 경량화가 요구되는 여러 분야, 즉 항공기, 인공위성, 원자로, 자동차 산업분야, 조선 산업분야 등 널리 사용되고 있다. 경량화가 요구되는 분야에 사용되는 구조 부재의 형상은 평판보다는 다양한 형태의 곡면 형상을 뛰는 챌(Shell)의 형상을 갖는다. 또한 이러한 구조물에 충격이 가해 졌을 때 곡면을 갖는 구조물의 충격_응답 및 파괴형태는 평판과는 다른 양상을 보인다.(중략)

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.15 no.9
• /
• pp.785-795
• /
• 1990

For the far field radiation pattern of a microstrip array antenna which is conformed to a cylindrical surface and forms an arc array, an approximate analysis method using FOURIER TRANSFORM is presented. In this method, the conformal array antenna is projected on the effective aperture plane and assumed to be an aperiodic array with nonlinear phase tilt. The effective aperture plane includes four end-points of each arc on the cylindrical surface. When the effective aperture ratio which is normalized to the planar type is from 1.0 to 0.9, it is confirmed that this approximate method is valid. To the array on the effective aperture plane, it is assumed that the phase tilt is due to the distance between aperture plne and curvature surface. Specially, when the radius of arc is more than 5 times to its length, the FOURIER TRANSFORM METHOD could be used with only varying scale factors. The results of calculating by approximate method are good agreement with the results of COORDINATE TRANSFORM METHOD and experimentally measured value in the range of -40dB. And, the difference of half power angle is less than 5 degrees when the effective aperture ratio moer than 0.9.

• The KIPS Transactions:PartA
• /
• v.19A no.2
• /
• pp.73-76
• /
• 2012

In this paper, we propose an efficient method to extract surface atoms from a protein molecule. Surface atoms are defined as a set of atoms who can contact given probe solvent $P$, where $P$ does not collide with the molecule. The atoms contained in the molecule are represented as a set of spheres with van der Waals radii. The probe solvent also is represented as a sphere. We propose a method to extract the surface atoms by computing the offset surface of the molecule with respect to the radius of $P$. For efficient computation of the offset surface of a molecule, a voxel map is constructed for the offset surfaces of the spheres. Based on GPU (graphic processor unit) acceleration, a data parallel algorithm is used to extract the surface atoms in 42.87 milliseconds for the molecule containing up to 6,412 atoms.