• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1992년도 춘계학술대회 논문집
• /
• pp.55-59
• /
• 1992

최근 신 연삭 공구인 미세한 지립의 다이아몬드 휠을 이용함으로써 고경도와 취성을 지니는 엔지 니어링 세라믹스등의 신소재및 초경재 등 난삭재류를 대상으로 경면 가공을 추구하고자 노력이 진행중이다. 이는 래핑이나 폴리싱 등의 유리 지립에 의한 경면 창성법에 비하여 가공 능률이나 가공 정도가 높고 곡면이나 홈 등의 복잡 형상부의가공에도적용할 수 있다는 잇점이 있기 때문이다. 따라서 현재 이러한 신 연삭 가공법은 지금까지 연삭 가공후에 연마 가공 공정을 부가함으로써 초정 밀 효과를 지닐 수 있었던 각종 부품들에대한 단일 최종 마무리가공 공정으로의 응용에많은 기대를 걸고 있다. 본 연구는 높은 압축 강도치, 고온경도치와 내마모성, 강성 등을 지님으로써 외부 압력에 대한 변형률이 극히 적어 금형 칫수에가까운 제품을 생산할 수 있다는 특성으로 근래그 사용도가 급증 하고 있는 초경합금 금형재를 대상으로 해그 동안 난삭재에 대한 최적 가공 조건 설정이 정립되어 있지 못했던 관계로 인하여 기존의 숙련자 경험에만 주로 의존 할 수 밖에 없었던 단순한 다이아몬드 연삭 공구의 활용추세로부터 탈피하고 Diamond wheel 및 범용 연삭 공구를 최적으로 활용함으로써 연삭 가공의 초정밀화를 달성하며후 가공을 생략할 수 있는 가공 공정을 창출 해내기위하여, 상관 관계를 연삭 저항 및 가공 표면 품위등의 측면으로분석, 평가해봄으로써 초정밀 가공 차원에서의 최적 가공 조건 설정을 위한 지침을 명확하게 규명하기 위하여 실험적으로 수행하게 된 것이다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 추계학술대회 논문집
• /
• pp.7-8
• /
• 2008

• 한국정밀공학회지
• /
• 제34권3호
• /
• pp.227-227
• /
• 2017

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 추계학술대회 논문집
• /
• pp.467-468
• /
• 2006

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 춘계학술대회 논문집
• /
• pp.513-514
• /
• 2008

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 춘계학술대회 논문집
• /
• pp.695-696
• /
• 2008

• 한국기계가공학회지
• /
• 제20권11호
• /
• pp.30-35
• /
• 2021

In this study, a machine simulation system was built using the actual scale of an AC-type 5-axis machine tool for mold surface machining that can be used in applications, such as, modeling and machine building, stroke, and collision detection. The validity of the 5-axis machine simulation system was verified by performing tool path generation, post-processing, machine simulation, prototype motion simulation, and an actual cutting experiment. This entire process was intended to activate the 5-axis machining in mold surface machining.

• 한국정밀공학회지
• /
• 제26권2호
• /
• pp.35-44
• /
• 2009

Long stroke Fast Tool Servo (LFTS) with maximum stroke of $432{\mu}m$ is designed, manufactured and tested for fabrication of optical free-form surfaces. The large amount of stroke in LFTS has been realized by utilizing the hinge and lever mechanisms which enable the displacement amplification ratio of 4.3. In this mechanism the peculiar shape was devised for maximizing the displacement of end tip in LFTS and special mechanical spring has been mounted to provide the sufficient preload to the piezoelectric actuator. Also, its longitudinal motion of tool tip can be measured by capacitive type displacement sensor and closed-loop controlled to overcome the nonlinear hysteresis. In order to verify the static and dynamic characteristics of designed LFTS, several features including step response, frequency response and cut-off frequency in closed-loop mode were experimentally examined. Also, basic machining result shows that the proposed LFTS is capable of generating the optical free-form surface as an additional axis in diamond turning machine.

• 소성∙가공
• /
• 제13권1호
• /
• pp.33-38
• /
• 2004

A new approach for the design of extrusion die surface of arbitrarily shaped section is presented. In order to generate the extrusion die surface. an automatic surface construction method based on B-spline surface and scalar field theory is proposed. The isothermal lines and stream lines designed in the scalar field are introduced to find the control points which are used in constructing B-spline surfaces. Intersected points between the isothermal lines and stream lines are used to construct B-spline surfaces. The inlet and outlet profiles are precisely described with B-spline curves by using the centripetal method for uniform parameterization. The extrusion die surface is generated by using the cubic curve interpolation in the u- and v-directions. A quantitative measure for the control of surface is suggested by introducing the tangential vectors at the inlet and outlet sections. To verify the validity and effectiveness of the proposed method, automatic surface generation is carried out for extrusion dies of arbitrarily shaped sections.

• 대한기계학회논문집
• /
• 제19권9호
• /
• pp.2089-2104
• /
• 1995

A novel and efficient cutter path planning method for machining intricately shaped curved surfaces, called the steepest directed tree method, is presented. The curved surface is defined by triangular facets, the density and structure of which are determined by the intricacy and form accuracy of the surface. Geometrical form definition and recognition of the topological features are used to connect the nodes of the triangulated surface meshes for the successive and interconnected steepest pathways, which makes good use of end milling characteristics. The planetary cutter centers are determined to locate along smoothly changing paths and then the height values of the cutter are adjusted to avoid surface interference. Several machined examples of intersecting and intricate surfaces are presented to illustrate the benefits of the new approach. It is shown that due to more consistent geometry matching between cutter and surface(in comparison with the current CC Cartesian method) surface finish can be typically improved. Moreover, the material in concave fillets which is difficult to be removed by ball mills can be removed efficiently. The built-in positioning of cutter to avoid interference runs minutely in the sharp and discontinuous regions. The steepest upward movement of the cutter gives a stable dynamic cutting state and allows increase in the feedrate and spindle speed while remaining the stable cutting state.