Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on Post-Processing and Machine Simulation of AC Type 5-Axis Machine Tool for Machining of Mold Surface

금형 곡면 가공을 위한 AC타입 5축 가공기의 포스트프로세싱 및 머신 시뮬레이션에 관한 연구

  • Yun, Il-Woo (Department of Mechanical System, Gwangju Campus of Korea Polytechnics) ;
  • Hwang, Jong-Dae (Department of Mechanical System, Busan Campus of Korea Polytechnics) ;
  • Ko, Dae-Cheol (Graduate School of Convergence Science, Pusan National University)
  • 윤일우 (한국폴리텍대학 광주캠퍼스 기계시스템과) ;
  • 황종대 (한국폴리텍대학 부산캠퍼스 기계시스템과) ;
  • 고대철 (부산대학교 융합학부)
  • Received : 2021.08.10
  • Accepted : 2021.09.08
  • Published : 2021.11.30
Download PDF
⟨ Previous Next ⟩

Abstract

In this study, a machine simulation system was built using the actual scale of an AC-type 5-axis machine tool for mold surface machining that can be used in applications, such as, modeling and machine building, stroke, and collision detection. The validity of the 5-axis machine simulation system was verified by performing tool path generation, post-processing, machine simulation, prototype motion simulation, and an actual cutting experiment. This entire process was intended to activate the 5-axis machining in mold surface machining.

Keywords

References

  1. Lee, I. S., Kim, H. J., and Kim, N. K., "A Study on the Application of Machine Simulation and Angle Milling Head of a 6-Axis Parallel Kinematic Machine," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 16, No. 5, pp. 47-54, 2017.
  2. Kim, H. J., Lee, I. S., and Kim, N. K., "Interference Check and NC Data Optimization through Machine Simulation in 5 Axis Machining of a Vehicle Parts of Aluminum Alloy," Journal of the Korean Society for Precision Engineering, Vol. 21, No. 12, pp. 52-59, 2004.
  3. Kim, H. J., Jang, J. H., and Kim, N. K., "A Study on Interference Phenomenon of a Machine Tool When 5 Axis Working with Virtual Machine Tool," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 4, No. 2, pp. 16-23, 2005.
  4. Yun, I. W. and Hwang, J. D., "NX(UG) CAD/CAM 5-axis Machining Technology," KWANGMOONKAG Inc., pp. 314-15, 2020.
  5. Cho, E. J., Hwang, J. D., Jung, Y. G., "Study on the Development of Post-Processor for 5-Axis NC Machining," J. of Korean Society of Machine Tool Engineers, Vol. 15, No. 3. pp. 53-58, 2006.
  6. Jung, H. C., Hwang, J. D., Park K. B., Jung, Y. G., "Development of a Practical Postprocessor for 5-axis Machine Tool with Non-orthogonal Rotary Axes," Journal of Central South University of Technology, Vol. 18, No. 1. pp. 159-164, 2011. https://doi.org/10.1007/s11771-011-0674-x
  7. Hwang, J. D and Yun, I. W., "CATIA CAM 5-axis Machining Technology," KWANGMOONKAG Inc., pp. 29-30, 2020.