• Title/Summary/Keyword: 곡률반경의 비

Search Result 83, Processing Time 0.028 seconds

The Study about Measuring Method in Radius of Eyeglasses Lens Curvature by using Keratometer (각막곡률계를 이용한 안경렌즈 곡률반경 측정방법에 관한 연구)

  • Cha, Jung Won
    • Journal of Korean Ophthalmic Optics Society
    • /
    • v.17 no.2
    • /
    • pp.127-133
    • /
    • 2012
  • Perpose: The aim of this study is to investigate the measuring method in radius of eyeglasses lens curvature by using keratometer in noncontact method. Methods: A trial lens for vision test in diopter range from -9.00 D to -11.50 D were attached in front part of keratometer, after that we set eyeglasses lens at the place where eyeglasses lens is apart about 25 cm from front position of keratometer. We measured the radius of curvature from observation of clear mire image while the position of eyeglasses lens is changed in a small quantity. After that, we made some formulas for compensation of radius of curvature by using spherometer. Results: The radius of curvature was successfully measured by keratometer with trial lens in front part of it. The measured radius of curvature was changed to compensation value using spherometer data, and the 5 kind of linear equation to make compensation value was made. Any kind of lenses measured by using keratometer that trial lens was attached in front part of it, after that it was confirmed that the result of calculation from line equation is exact in error ratio below 3.5%. Conclusions: It was confirmed that radius of eyeglasses lens curvature can be measured by using keratometer by noncontact method, and the accuracy is higher than "lens measure".

A Numerical Study for the Scalar Dissipation Rate and the Flame Curvature with Flame Propagation Velocity in a Lifted Flame (부상화염에서 화염전파속도에 따른 스칼라소산율과 곡률반경에 대한 수치적 연구)

  • Ha, Ji-Soo;Kim, Tae-Kwon;Park, Jeong;Kim, Kyung-Ho
    • Journal of the Korean Institute of Gas
    • /
    • v.14 no.3
    • /
    • pp.46-52
    • /
    • 2010
  • Flame propagation velocity is the one of the main mechanism of the stabilization of triple flame. To quantity the triple flame propagation velocity, Bilger presents the triple flame propagation velocity, depending on the mixture fraction gradient, based on the laminar jet flow theory. However, in spite of these many analyses, there has not been any attempt to quantify the triple flame propagation velocity with the flame radius of curvature and scalar dissipation rate. In the present research, there was discussion about the radius of flame curvature and scalar dissipation rate, through the numerical study. As a result, we have known that the flame propagation velocity was linear with the nozzle exit velocity and scalar dissipation rate decreases nonlinearly with the flame propagation velocity and radius of curvature of flame increases linearly. Also radius of curvature of flame decreases non-linearly with the scalar dissipation rate. Therefore, we ascertained that there was corelation among the scalar dissipation rate, radius of flame curvature and flame propagation velocity.

Discharge Coefficient of Side Weir for Various Radius of Curvatures (곡률반경에 대한 횡월류 위어의 유량계수 분석)

  • Ahn, Jeong-Hwan;Kim, Je-Kuk;Cho, Won-Cheol
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2011.05a
    • /
    • pp.155-159
    • /
    • 2011
  • 본 연구는 만곡수로 외측에 횡월류 위어를 설치하여 곡률반경에 대한 횡월류 유량계수의 특성을 분석하였다. 곡률반경의 변화에 따른 만곡부의 중심각이 180인 수로모형을 설계하였으며, FLOW-3D모형에 적용하여 유량계수를 산정하고 직선 수로와 비교하여 유량계수의 특성을 분석하는데 목적이 있다. 난류모형은 RNG-$\in$ 모형을 사용하였으며, 수치기법으로는 유한체적법을 사용하였다. 모형의 적용성 검정을 위해 기존에 연구되었던 수리실험과 동일한 조건의 수치모의를 수행하여 모형의 적용성을 확인하였다. 본 연구에서는 하폭를 고정시키고 곡률반경를 변화시킴으로써 $R_c/b$의 변화에 따른 유량계수(C)의 변화를 분석하고, 만곡수로의 월류량($Q_{wc}$)에 대한 직선수로의 월류량($Q_{ws}$)의 비, 만곡수로의 평균 월류 수심에 대한 직선수로의 평균 월류 수심($y_{cave}/y_{save}$)과 $R_c/b$의 관계를 분석하였다. 분석결과 유량계수는 상류수심, 월류량, 만곡수로의 곡률반경 등의 변화에 따라 유량계수는 변화하였으며, 직선과 만곡수로에 대해 분석을 수행하였기 때문에 직선수로의 영향인자를 이용하여 만곡수로에 설치된 횡월류 위어의 월류량과 유량계수를 추정 가능할 것이라 판단된다.

  • PDF

The diameter and base curve changes of soft contact Lens by protein deposition (단백질 침착에 의한 소프트콘택트렌즈의 직경 및 곡률반경 변화)

  • Park, Mi-Jung;Cho, Gyu-Tae;Shin, Sung-Hwan;Lee, Heum-Sook;Kim, Dae-Soo
    • Journal of Korean Ophthalmic Optics Society
    • /
    • v.10 no.3
    • /
    • pp.165-171
    • /
    • 2005
  • The aim of the study was to investigate the diameter and base curve changes of soft contact lens by protein deposition. Soft contact lenses were soaked in artificial tear or protein solution which had the same composition with tear for 2min, 10min, 30min, 1hr, 3hr, 6hr, 12hr, and 24hr. Diameter and base curve changes of soft contact lenses were examined by using the high speed camera(Fastcam ultima 1024). The longer the soaking time of soft contact lenses in the artificial tear, the diameter and base curve changes of soft contact lenses was more increased. In the case of soft contact lenses adsorbed only protein, the similar pattern was shown and the diameter and base curve were decreased. However, the influence of calcium ion was found to be less than that of protein. These results suggest that the tear protein causes the diameter and base curve decrease of soft contact lens, which might be related to the discomfort after soft contact lens wearing.

  • PDF

Damage Assessment of Curved Composite Laminate Structures Subjected to Low-Velocity Impact (곡률을 가진 적층복합재 구조에서의 저속충격손상 평가)

  • 전정규;권오양;이우식
    • Composites Research
    • /
    • v.14 no.2
    • /
    • pp.22-32
    • /
    • 2001
  • Damage induced by low-velocity impact on the curved composite laminates was experimentally evaluated for CFRP cylindrical shells with the radius of curvatures of 50, 150, 300, and 500 mm. The result was then compared with that of flat laminates and with the results by nonlinear finite-element analysis. The radius of curvatures and the effective shell stiffness appeared to considerably affect the dynamic impact response of curved shells. Under the same impact energy level, the maximum contact force increased with the decreasing radius of curvatures, with reaching 1.5 times that for plates at the radius of curvature of 50 mm. Since the maximum contact farce is directly related to the impact damage, curved laminates can be more susceptible to delamination and less resistant to the low-velocity impact damage. Delamination was distributed rather evenly at each interface along the thickness direction of curved laminates on the contrary to the case of flat laminates, where delamination is typically concentrated at the interfaces away from the impact point. This implies that the effect of curvatures has to be considered for the design of a curved composite laminate.

  • PDF

Characteristics of Wave Overtopping with Flared Shaped Protection Wall (2중곡면 방파제의 곡면특성에 따른 월파제어효과)

  • Kim, Mun Jeong;Lee, Geun Il;Lee, Seong Dae
    • 한국방재학회:학술대회논문집
    • /
    • 2011.02a
    • /
    • pp.218-218
    • /
    • 2011
  • 2중곡면 반파공의 월파 특성을 검토하기 위하여 입사파고 및 주기가 각각 다른 불규칙파를 대상으로 수리실험을 실시하였으며, 2중곡면 반파공과 직립형 구조물에 대해 동일한 조건으로 실험하여 이를 명확히 하였다. 특히 2중곡면 상부의 곡률반경에 따라 외해측으로 되돌리는 파랑의 비말효과에서 큰 차이가 있을 것에 착안하여 상부곡면부의 곡률반경이 증가한 정상 2중곡면 반파공(FSW)과 상부곡면부의 곡률반경이 감소한 역 2중곡면 반파공(IFSW)에 대해 실험을 수행하였다. 그리고 2중곡면 원호 크기의 비 B/D=0, 20%, 40%, 60% 및 80%인 경우에 대해서도 월파특성을 비교 검토하여 다음과 같은 결론를 얻었다. 1. 2중곡면 원호 크기의 비 B/D가 증가할수록 월파저지 효과가 개선됨을 확인 하였으며 최대 B/D가 0.8인 경우 0.2에 비해 50% 이상 월파유량이 감소하여 B/D의 변동에 따른 월파저지특성을 확인하였다. 2. 역2중곡면 반파공(IFSW)의 실험결과 기존 정상2중곡면 반파공(FSW)에 비하여 20%이상 월파량이 감소하고 있음을 알 수 있었으며 이는 2중곡면 상부측의 곡률 반경이 증가함에 따른 기하학적 특성에 의해 외해측으로의 되돌림 파랑(수괴)이 증가한 것으로 판단된다. 3. 동일한 마루높이에 대해 직립형 호안에 의한 월파량 비교결과 역 2중곡면 반파공(IFSW)의 경우 최대 80%이상의 월파량 저감 효과가 나타나는 것으로 검토되었다. 4. 월파저지의 측면에서 2중 곡면공에 비해 역2중 곡면공이 우수한 것으로 예측되었으나 2중곡면 반파공의 소파원리가 반파공의 원호내에서 쇄파를 야기하여 파에너지를 소멸하는 것이므로 쇄파를 유도하는 과정에서 충격쇄파압의 발생이 예측되는 바 이에 대한 계속적인 연구가 필요한 것으로 판단된다.

  • PDF

Study of the Axial Length/Corneal Radius Ratio in Determining the Refractive State of the Eye (굴절이상과 안축장/각막곡률반경 비와의 관계에 관한 연구)

  • Seo, Y.W.;Choe, Y.J.
    • Journal of Korean Ophthalmic Optics Society
    • /
    • v.4 no.2
    • /
    • pp.23-31
    • /
    • 1999
  • The purpose of this study is to evaluate the relationship between axial length/corneal radius ratio and refractive error for human eye. Ocular components were measured Baush & Lomb keratometer, Holden-Payor pachometer, and Stoz Compuscan. Refractive error was measured by subjective refraction. The results were as follows; 1) Spherical equivalent refractive error and axial length/corneal radius ratio was very highly correlated with the correlation coefficient for -0.89. 2) Axial length/corneal radius ratio and axial length, vitreous chamber depth were highly correlated that the correlation coefficients were 0.82, 0.80 respectively. 3) Axial length/corneal radius ratio and anterior chamber depth, corneal power, corneal radius, lens power were correlated with the correlation coefficients for 0.57, 0.40, -0.39, -0.35 respectively. 4) There were no significant correlation between axial length/corneal radius ratio and lens thickness, and corneal thickness.

  • PDF

Discharge Coefficient of Side Weir for Various Curvatures Simulated by FLOW-3D (FLOW-3D를 이용한 다양한 곡률에 대한 횡월류 위어의 유량계수 산정)

  • Jeong, Chang Sam
    • Journal of Korean Society of Disaster and Security
    • /
    • v.8 no.1
    • /
    • pp.5-13
    • /
    • 2015
  • In this study, the lateral overflow discharge coefficients for the curvatures of side weir on meandering channel were analyzed. The side weir installed in accordance with the variation of the radius of curvature of the central angle bends with $180^{\circ}$. FLOW-3D model is applied to calculate the discharge coefficients of the side-weir on meandering and straight channels and the characteristics of the discharge coefficients are analysed. In order to verify the numerical model, the results from the hydraulic experiment conducted by the former research are compared with the results simulated by FLOW-3D in the same conditions. The discharge coefficients are calculated for the ratio between curvature ($R_c$) and channel width (b), and the ratio between over flow discharge of the straight channel ($Q_{wc}$) and the meandering channel ($Q_{wc}$) are compared. As the result, the discharge coefficients depend on the weir depth on upstream, and the radius of curvature, so that the discharge coefficients of side weir on the meandering channel can be estimated by them on the straight channel.

Study of the cornea characteristics using Oculus Pentacam (Oculus Pentacam을 사용한 각막 특성 분석)

  • Lee, Jeung-Young;Park, Eun-Kyoo
    • Journal of the Korea society of information convergence
    • /
    • v.6 no.1
    • /
    • pp.37-41
    • /
    • 2013
  • In this study, by using the Oculus Pentacam, we analyzed the relationship of corneal front astigmatism corneal and the radius of curvature of the rear face of the 20's to 40's. The vertical radius of curvature were man 7.94mm (${\pm}0.22$), women 7.87mm (${\pm}0.21$), the horizontal radius of the anterior corneal appeared man 7.69mm (${\pm}0.27$), women 7.63mm(${\pm}0.23$). And rear vertical radius of curvature were man 6.52mm(${\pm}0.23$), woman 6.55mm (${\pm}0.22$), the horizontal radius of the anterior corneal appeared man 6.06mm (${\pm}0.24$), woman 6.08mm(${\pm}0.24$). The results of correlation analysis between the radius of corneal posterior surface and the anterior corneal surface, it was found out that there is a significant correlation. In this study, similar results were obtained anterior surface of the cornea, the radius of curvature of the rear surface, the refractive power, and astigmatism, as other papers that have been reported. But in this paper, the cornea thickness was thicker than other previously reported paper.

  • PDF

Experimental analysis of the behavior of bars and meandering developments in the vegetated channels (식생하도에서 식생밀도 변화에 의한 사주의 거동과 사행의 발달과정 분석)

  • Jang, Chang-Lea;Kang, Tae Un
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2021.06a
    • /
    • pp.4-4
    • /
    • 2021
  • 하도 식생은 하천의 지형변화에 많은 영향을 준다. 식생밀도가 증가하면, 하안의 안정성이 증가하고 하안침식이 감소하며, 사주의 형상과 거동에 영향을 준다. 특히, 사주의 이동은 저수로의 변화에 영향을 주다. 따라서 본 연구에서는 식생하도에서 사주의 이동과 사행의 발달과정을 실내실험과 수치모의를 통하여 분석하였다. 하안의 안정성은 홍수터의 하도식생의 밀도에 영향을 받게 된다. 하안의 안정성을 변화시키기 위하여 실제 식생인 알팔파 밀도를 조절하여 성장시켰다. 초기에 하안침식이 발생하고, 하폭이 증가하였다. 시간이 증가하면서 상류에서 교호사주 발생하고, 하류로 이동하면서 선택적으로 하안이 침식하였다. 시간이 증가함에 따라, 하폭은 증가하고 사주의 이동속도는 감소하며 사주의 파장도 증가하였다. 홍수터 식생이 없는 조건에서는 하안침식이 빠르고 사행의 발달이 크지 않았다. 그러나 식생 밀도가 증가함에 따라, 하안에서 부분 침식이 발달하였다. 식생이 없는 조건에서는 곡률반경 대 하폭의 비인 무차원곡률반경과 하안침식속도에 영향을 주지 않지만, 식생의 밀도가 증가함에 따라, 무차원곡률반경과 하안침식속도가 증가하였다. 사주의 이동이 정지됨에 따라, 식생이 없는 조건에서는 사행의 만곡부에서 저수로의 폭이 크지만, 홍수터 식생이 있는 조건에서는 저수로의 폭이 일정하게 유지된 상태로 사행이 발달하였다. 이는 식생 식생이 없는 조건에서 유출되는 유사량은 불규칙하게 배출되었으며, 이는 하안침식과 사주의 이동에 의하여 영향을 받기 때문이다. 그러나 식생이 있는 하도에서 유사유출량은 감소하고 상대적으로 일정하게 배출되었다. 이는 저수로 폭이 일정하게 유지되고 사주의 발달도 크지 않아서 발달한 것으로 판단된다.

  • PDF