• Title/Summary/Keyword: 고형분율

Search Result 17, Processing Time 0.021 seconds

Analysis of Fundamental Properties of Cement Mortar with Change of Solid Contents of PC Type Water Reducing Agent (PC계 감수제의 고형분율 변화에 따른 시멘트 모르타르의 기초적 특성 분석)

  • Kim, Min-Sang;Moon, Byeong-Yong;Lee, Jae-Jin;Lee, Jea-Hyun;Han, Min-Cheol;Han, Cheon-Goo
    • Proceedings of the Korean Institute of Building Construction Conference
    • /
    • 2017.11a
    • /
    • pp.22-23
    • /
    • 2017
  • This research aimed to analyze the fundamental properties of cement mortar accompanying the change of solid contents of PC type water reducing agent. As a result of the experiment, in the case of flow to the properties of the fresh mortar, it shows a tendency to decrease as the solid content ratio decreases, and the decrease width with the passage of time is greatly reduced when 30 minutes passed since the passage of 60minutes It turned out that it was. In the case of the air contents and the compressive strength, it was found that there is almost no difference due to the change in the solid contents.

  • PDF

Fundamental Characteristics of Mortar According to the Changes in the Solid Content Rate of the Water-Reducing Agent (감수제의 고형분율 변화에 따른 모르타르의 기초적 특성)

  • Kim, Min-Sang;Lee, Jae-Jin;Hyun, Seong-Yong;Kim, Tae-Woo;Han, Min-Cheol;Han, Cheon-Goo
    • Proceedings of the Korean Institute of Building Construction Conference
    • /
    • 2017.05a
    • /
    • pp.156-157
    • /
    • 2017
  • It is possible in the case of the chemical admixtures for concrete currently being used in actual work sites to omit quality evaluation and replace it with the scores of the admixture manufactures; this can create a problem of decline in reliability in quality on the work site. Therefore this study sought to analyze the degree of influence changes in the solid content rate of lignin- and naphthalene-based water-reducing agents have on the fundamental characteristics of cement mortar. The results showed that in fresh mortar, the flow and amount of air decreases with decrease in the solid content ratio. In hardened mortar, the condensation strength had hardly any effect on the use of lignin-based water-reducing agent, but naphthalene-based water-reducing agent increased with the decrease in the solid content ratio.

  • PDF

Assessment of the Organic and Nitrogen Fractions in the Sewage of the Different Sewer Network Types by Respirometric Method (미생물 호흡률 측정에 의한 관거시스템 유형별 하수의 기질 분율 평가)

  • Park, Jong-Bu;Hur, Hyung-Woo;Kang, Ho;Chang, Sung-Oun
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.31 no.8
    • /
    • pp.649-654
    • /
    • 2009
  • Respirometric analysis of domestic sewage by measuring oxygen uptake rate(OUR) was carried out for the experimental assessment of the organic and biomass fractions. The data of the organic and biomass fractions in sewage is essential for the activated sludge model to optimize the biological treatment plant. As a result of this study, the fractions of readily biodegradable substrate($S_S$), slowly biodegradable substrate($X_S$), inert soluble substrate($S_I$), inert particular substrate($X_I$) and heterotrophic biomass($X_{HAB}$) were about 26.6%, 41.5%, 8.5%, 14.7% and 8.7% on the basis of chemical oxygen demand($COD_{Cr}$), respectively. And the fractions of nitrogen were also studied. The fractions of soluble nitrate nitrogen($S_{NO}$), soluble ammonia nitrogen($S_{NH}$), soluble nonbiodegradable organic nitrogen($S_{NI}$), soluble biodegradable organic nitrogen($S_{ND}$) and slowly biodegradable organic nitrogen($X_{ND}$) were about 3.7%, 64.9%, 4.7%, 9.4% and 17.4%, respectively.

Analysis of Fundamental Properties of Cement Mortar with Change of Solid Contents of PC Type Maintenance System Water Reducing Agent (유지계 PC감수제의 고형분율 변화에 따른 시멘트 모르타르의 기초적 특성 분석)

  • Kim, Min-Sang;Lee, Jae-Jin;Hyun, Seong-Yong;Moon, Byeong-Yong;Han, Min-Cheol;Han, Cheon-Goo
    • Proceedings of the Korean Institute of Building Construction Conference
    • /
    • 2017.11a
    • /
    • pp.145-146
    • /
    • 2017
  • This research aimed to analyze the fundamental properties of cement mortar accompanying the change of the solid contents of the maintenance type PC water reducing agent. As a result of the experiment, it was found that the properties of fresh mortar show a tendency to decrease as the solid contents decreases in the case of flow and air contents, and the decrease width with time is small. It was found that the compressive strength of the hardened mortar has almost no difference due to the change of the solid fraction.

  • PDF

The Effects of Various Factors on Milk Yield and Variation in Milk Yield Between Milking, Milk Components, Milking Duration, and Milking Flow Rate in Holstein Dairy Cattle (착유우의 연속유량, 유량변이, 유성분, 체세포수, 비유지속시간, 비유속도에 대한 산차, 착유시간, 유기 및 착유간격의 효과)

  • Ahn, B.S.;Jeon, B.S.;Baek, K.S.;Park, S.J.;Lee, H.J.;Lee, W.S.;Kim, S.B.;Park, S.B.;Kim, H.S.;Ju, J.C.;Khan, M. A.
    • Journal of Animal Science and Technology
    • /
    • v.47 no.6
    • /
    • pp.919-924
    • /
    • 2005
  • This study was carried out to estimate the effects of parity, milking time, milking interval and days in milk(DIM) on variation in milk yield between consecutive milkings(am to pm to am), morning and evening milk yield and its components, somatic cell counts(SCS), milking duration, milk flow rate and peak milk flow in Holstein dairy cattle. Records from one hundred and twenty two heads of Holstein cattle at National Livestock Research Institute, Korea were used for this study from July 1 to August 8, 2005. The experimental herd had average 1.6$\pm$0.9 parities, 199.8$\pm$109.1 DIM and 12.26$\pm$4.06kg milk yields at each milking. Milking yield, percent milk fat and SNF, milking duration and average milk flow were significantly varied by parity, milking time and DIM. Percent milk protein and lactose were varied by parity and DIM, however SCS and average milk flow were affected by parity and milking time. Milking interval significantly affected the consecutive, morning and evening milk yield and average milk flow. However, MUN was not affected by parity, milking time, DIM and milking interval. Milk yield was decreased with increasing parity. Milk yield in the morning was higher than that of in the evening. Milk yield between consecutive milking was not affected by parity, however, affected by milking time. Percent milk Fat, SNF and SCS were higher at in evening milk than those of in morning milk. Milk protein, lactose, SNF, SCS, milking duration and peak milk flow rate were influenced by parity. This study suggested that milk yield variation between consecutive milking, milking flow rate, and milking duration could be important traits for enhancing Holstein cattle productivity however, and more study is needed to estimate genetic parameters for such traits.

The Effect of Crystallization Condition on the Crystallization Rate of Zeolite A (제올라이트 A의 결정화 속도에 대한 결정화 조건의 영향)

  • Chung, Kyeong-Hwan;Seo, Gon
    • Applied Chemistry for Engineering
    • /
    • v.4 no.1
    • /
    • pp.94-102
    • /
    • 1993
  • The effects of temperature and of $Na_2O$ and $SiO_2$ contents on the crystallization of zeolite A were studied, by examining crystallization curves and particle size distributions of final products at various crystallization conditions. Crystallization process could be simulated adopting the assumptions of constant linear growth rate and equilibrium between amorphous solid phase and soluble species. Rate constants were determined by comparing the simulated crystallization curves with experimental data. Rate constant for linear growth increased with temperature and crystallization rate at different mole ratio of $Na_2O/H_2O$ correlated reasonably well with increase of soluble species. The rate constant of crystallization did not increase with increase in mole ratio of $Na_2O/H_2O$, but the rate of nuclei formation and the fraction of soluble species were enhanced. The rate constants for linear growth of zeolite A were determined as $0.07{\sim}0.24{\mu}m{\cdot}min^{-1}$ at these experimental conditions Apparent activation energy was estimated as $49kJ{\cdot}mol^{-1}$.

  • PDF

Genetic and Environmental Effects on the Lactation Yield and Milk Compositions in Holstein Cow (Holstein종 유우(乳牛)의 비유량(泌乳量) 및 유조성분(乳組成分)에 미치는 유전(遺傳) 및 환경(環境)의 효과(效果))

  • Sang, Byong Chan;Seo, Kil Woong
    • Korean Journal of Agricultural Science
    • /
    • v.21 no.1
    • /
    • pp.45-53
    • /
    • 1994
  • This study was conducted to estimate the genetic and environmental effects on lactation yield and milk compositions in Holstein cows. The data analysis were the records of 159 cows rearing at Nation Animal Breeding Institute from 1990 to 1991. The least square means were estimated on milk and fat yield in lactation yield, and the percent of fat, protein, solids-not-fat and total solid in milk composition. The results obtained are summarized as follows: 1. The average yield of milk and fat in 305 days were $7,26.56{\pm}3,57.24$ and $254.65{\pm}44.94Kg$ and the percent of fat, protein, solids-not-fat and total solid were $3.69{\pm}0.43$, $3.32{\pm}0.41$, $9.15{\pm}0.49$ and $12.75{\pm}0.96$ and the coefficients of variation were 18.68, 17.64, 11.88 and 12.34% for milk yield, fat yield, fat percent and protein percent, respectively. 2. The effect of sires was highly significant at 1% level in milk and fat yield and fat percent, and significant at 5% level in protein and total solid percent. Among the sires, B, L and O sire were superior in milk yield with 7,571.22, 7,499.11 and 7,420.58 Kg, and A, F and K sire were superior in protein percent with 3.75, 3.64 and 3.65, respectively. 3. The effect of parity was highly significant at 1% level in milk yield, and significant at 5% level in fat yield. Among the parities, the 3rd parity was superior in milk and fat yield with 7,634.54 and 274.98 Kg, and the 4th and over was superior in fat and protein percent with 3.90 and 3.50, respectively. 4. The effect of calving seasons was highly significant at 1% level in milk yield, and significant at 5% level in fat yield, and the percent of fat, protein and total solid. Among the calving seasons, spring and winter were superior in milk yield with 7,310.31 and 7,364.57 Kg, also spring and winter were superior in protein percent with 3.68 and 3.52, respectively.

  • PDF

Effectiveness of Settling Treatment System to Reduce Urban Nonpoint Source Pollutant Load by First Flush (초기 강우에 의한 도시 유역 비점오염 부하의 유입 저감을 위한 침강 처리 시설 적용 타당성 분석)

  • Kim, Jaeyoung;Seo, Dongil;Lee, Tongeun
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.39 no.3
    • /
    • pp.140-148
    • /
    • 2017
  • The effectiveness of the first flush treatment system using settling process was evaluated to reduce urban nonpoint source pollutant loads to surface water during storm events. A pilot scale system was constructed and tested in the field and surface runoff samples were collected automatically according to pre-defined conditions. Nine rainfall events were tested and average removal efficiencies of TSS (Total Suspended Solid), TP (Total Phosphorus) and TN (Total Nitrogen) were evaluated as 87.4%, 75.3%, and 43.6%, respectively. Concentration and removal efficiency of pollutants were found to be affected by an amount of rainfall and rainfall intensities of the respective events. This seemed to be caused by the greater particulate fractions of first flushed samples than the samples collected in later time periods during the same rainfall events. The study showed that it is possible to remove a significant portion of the nonpoint source pollutant loads in initial rainfall runoff by using a simple settling process for TSS and TP without requiring additional power or chemicals.

Synthesis and Characterization of Acrylic-Modified Water-Reducible Alkyd Resin 2. Modification by MA and TMPTA Graft Copolymerization (수용성 아크릴 변성 알키드 수지의 합성과 물성 2. MA 및 TMPTA 공중합체에 의한 변성)

  • Cho, Young-Ho;Kang, Ki-Joon;Noh, Si-Tae
    • Applied Chemistry for Engineering
    • /
    • v.5 no.4
    • /
    • pp.698-705
    • /
    • 1994
  • The basic medium oil modified alkyd resin was synthesized from linseed oil fatty acid(LOFA), phthalic anhydride(PAA), maleic anhydride(MA) and trimethylol propane(TMP) by condensation polymerization at $230^{\circ}C$. MA/TMPTA modified water-reducible alkyd resins were synthesized with TMPTA graft copolymerization onto the basic resin at $180^{\circ}C$. Acid value of the resin was controlled by the addition amount of MA and N,N-dimethylethanol amine(DMEA) was used as a neutralizing agent to prepare of the water-reducible alkyd resin. The effect of TMPTA on the graft copolymerization of the resin was studied by measuring molecular weight glass transition temperature(Tg), viscosity, graft efficiency, and gel contents of melanin cured film. Heat resistance, UV resistance and water resistance of cured film of MA/TMPTA modified resin was compared to those of TMA/TMPTA modified alkyd resin. The molecular weight, viscosity gel contents and graft efficiency of water reducible alkyd resin were increased according to the TMPTA graft copolymerization, but Tg was decreased. The viscosity was lower when the solid contents reached 40% than that of 30% content and also and also became lower with the extent of neutralization ratio, The heat resistance, UV resistance and water resistance of the MA/TMPTA modified alkyd resis were better than those of TMA/TMPTA modified alkyd resin but the storage stability of the TMA/TMPTA alkyd resis was better than that of MA/TMPTA modified alkyd resin.

  • PDF

Effect of the Applied Biostimulant Depth on the Bioremediation of Contaminated Coastal Sediment (연안오염퇴적물에 주입한 생물활성촉진제의 깊이가 생물정화효율에 미치는 영향)

  • Woo, Jung-Hui;Subha, Bakthavachallam;Song, Young-Chae
    • Journal of Navigation and Port Research
    • /
    • v.39 no.4
    • /
    • pp.345-351
    • /
    • 2015
  • This study investigated the optimum depth for the application of bioremediation in contaminated coastal sediment using a lab scale column experiment. The biostimulants were placed in the top surface of the sediment facing seawater, 3cm, 6cm and 10cm of the depth from the surface, respectibely. During the experiment, the changes of organic pollutants and heavy metal fractions in the sediment were monitored in 1 month and 3month time intervals. The organic pollutants found during various analysis such as chemical oxygen demand, total solids and volatile solids, significantly reduced when the depth of the biostimulant was 3cm or less. In contrast, at a depth of over 6cm, the reduction of organic pollutants decreased, and the results were similar to the control. Heavy metals fractions in the sediment also changed with the depth of the biostimulants. The exchangeable fraction of the metals was quite reduced at the sediment surface in the column, but the organic bound and residual fractions considerably increased at a depth of 3cm. Based on this study, the optimum biostimulants depth for in-situ bioremediation of contaminant coastal sediment is 3cm from the sediment surface.