• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.341-344
• /
• 2003

There are many problems in management of high-rise building construction performed in downtown area due to limited spaces and equipments for increasing kinds and quantities of material. By these restrictions, problems such as increase of construction cost. delay of construction period, decrease of productivity, occurrence of accident are caused. Recently, studies on JIT concept have focused on construction materials as a solution for the problems. But, studies about finishing material are insufficient yet. Accordingly, this study suggests flowing of current material management, JIT management effect, and development direction of lifting-up and procurement system with Low-emissivity double Glazing, among of main finishing materials.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.430-433
• /
• 2003

Cost, schedule, quality are the essential parts of success of every construction project. It is especially true in high-rise building construction. Among the construction components in high-rise building construction, curtain walls are very important elements for the project success because they take large portion of cost and schedule. However, curtain wall construction process are very complicated, where many entities including designers, suppliers, contractors and even maintenance contractors are involved. Therefore, control and management of their relationships and production process are critical. It is suggested that this can be solved by the concept of Supply Chain Management which is supported by the automated information technology with Radio Frequency Identification. Such concept is defined as 'Automated Life-Cycle Management System Based On SCM' and this study suggests rode map to establish the system.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.442-445
• /
• 2003

The purpose of this study is to present an improved lift-up & procurement work flow for effectiveness of resources increase in building construction. The current lift-up & procurement work flow has some waste factors; complicated information system, connection lack with process and decision-making delay. Therefore the study applied the value stream mapping methodology for improvement of current lift-up & procurement work flow. The main contents of the study are as follows; 1) A problem of current work flow were analyzed through current state mapping(CSM). 2) An improved work flow was suggested through future state mapping(FSM). 3) An improvement effect analysis of information system and lift-up planning The study recommends that continuous improvement of lift-up & procurement work flow and efficient management of information in building construction.

• Korean Journal of Construction Engineering and Management
• /
• v.5 no.1 s.17
• /
• pp.133-139
• /
• 2004

The purpose of this study is to present an improved lift-up &procurement work flow for effective resource utilization in building construction. The current lift-up &procurement work flow has some waste factors; complicated information system, connection lack with process and decision-making delay. Therefore the study applied the value stream mapping methodology for improvement of current lift-up &procurement work flow. The main contents of the study are as follows; 1) Problems of current work flow were analyzed through current state mapping(CSM). 2) An improved work flow was suggested through future state mapping(FSM). 3) An improvement effect analysis of information system and lift-up planning was investigated. The study recommends continuous improvement of lift-up &procurement work flow and efficient management of information in building construction as a future research.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.3
• /
• pp.213-224
• /
• 1992

An encoding technique based on region splitting and vector quantization is proposed for the lower level Laplacian pyramid images. The lower level Laplacian pyramid images have lower variance than higher levels but a great influence on compression ration due to large spatial area. And so from data compression viewpoint, we subdivide them with variance thresholding into two regions such as one called : flat region” and the other “edge region”, and encode the flat region with its mean value and the edge region as vector quantization method. The edge region can be reproduced faithfully and significant improvement on compression ratio can be accomplished with a little degradation of PSNR in spite of the effect of large flat region since the codebook used is generated from the edge region only on from the entire image including the flat region. It can be verified by computer simulation results that proposed method is more efficient in compression ratio and processing time than the conventional encoding technique of vector quantization.

• Journal of the Korea Concrete Institute
• /
• v.17 no.5 s.89
• /
• pp.727-734
• /
• 2005

High-rise residential buildings these days tend to adopt a building frame system as primary earthquake resisting structural system for some architectural reasons. But there exist several ambiguities in designing such building frame systems according to current codes with regards to : the effective stiffness property of RC cracked section in static and dynamic analyses, analytical model to evaluate story drift ratio, and deformation compatibility requirements of frames. The comparative study for these issues by appling KBC 2005 to a typical building frame system shows that demands of member strength and story drift ratio can be different significantly depending on engineer's Interpretation and application of code requirements. And a building frame system can be noneconomical, compared with the dual system, because of higher demands on strength or ductility in both frames and shear walls.

• Journal of Advanced Navigation Technology
• /
• v.18 no.5
• /
• pp.518-523
• /
• 2014

The development of Societal and Scientific technologies have increased risk of dysfunction caused by new technologies such as nuclear power, information technology. Also, urbanization and population density is increasing risk to high-rise building fires, traffic accidents, crime and etc. Implementation of wireless communication network on the societal security is very necessary for prevention, preparation and response against these risks. It always consists maintenance, management and the network must be maintained in an emergency. In this paper, we studied the societal security wireless communication network for prevention, preparation and response against complex disasters, and analyzed requirements(essential function, add-ons) for implementation network in the societal security wireless network.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.19 no.1
• /
• pp.45-59
• /
• 1991

본 연구에서는 객관적 환경지표와 그에 대한 인간의 주관적 반응간 의 인과적 관련도의 중요성이 강조된다. 좀 더 구체적으로, 거주자의 주관 적 반응인 주거만족과 객관적 환경지표의 하나인 주거환경유형들(건물유형 과 건물배치유형)과의 인과적 관련도가 본 연구에서 중점적으로 토의된다. 한국의 6개 대단위 공동주택단지가 본 연구의 대상지로 선정되었고, 표본 추출시 건물유형과 건물배치유형을 고려한 다단계 표집방법(multistage sampling)이 사용되었다. 설문면답방법(modified structured survey)에 의해 646명의 처리 가능한 응답이 수거되었다. 인과모형 검증의 첫 단계로서 다 수의 설문문항을 원래 관심있는 소수의 변수로 정선, 추출하기 위한 방법 으로 요인분석이 사용되었다. 요인분석으로부터 정선, 추출된 변수를 이용 해서 본 연구의 가설모형이 정립되고, 그 모형을 검증하기 위한 방법으로 경로분석이 사용되었다. 분석결과를 요약해 볼 때, 건물유형과 건물배치유 형 모두가 거주자의 지각, 인식, 태도 등의 적절한 매개변수들을 통해 거주 자의 주거만족에 유의한 영향을 미치는 것으로 나타났다. 건물유형은 일반 적으로 저층주거에서 고충주거로 바뀌면서, 거주자의 주거만족에 부정적인 영향을 미치고 있음이 확인되었고, 고층주거가 거주자에게 주는 시각적 단 조로움, 과밀감, 그리고 주차장을 포함한 옥외공간 이용상의 불편들과 또 그들로 인한 낮은 안전성 및 경관에 대한 불만족 등이 그 이유로서 밝혀졌 다. 건물배치유형의 경우, U자형의 배치유형이 선형배치유형에 비해 과밀 감 해소, 시각적 명료성 향상, 그리고 옥외공간 이용상의 편리 등 및 또 그 에 따른 경관에 대한 만족의 향상 때문에 거주자의 주거만족을 높이는 데 유리한 것으로 나타났다. 주거와 관련된 설계 및 계획분야를 위한 여러 다 양한 제안들이 본 연구에서 제시되고, 추후 관련 연구들을 위한 가능성들 도 토의되었다. 그 유용성 때문에, 아직 많은 이론적, 방법론적, 그리고 분 석상의 문제에도 불구하고, 객관적 환경지표들과 이용자들의 만족을 포함 한 다양한 주관적 변수들과의 관계를 경험적으로 밝히려는 시도가 계속되 어야 할 것으로 사료된다.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.18 no.2
• /
• pp.79-93
• /
• 1990

The purpose of this study is to establish better residential environment in APT. complex. In this study, the actual conditions of exterior space, user behavior and degree of satisfaction are investigated and analyzed on the 5 high-rise story APT complex in Taegu city. The results of this study were as follow ; The size and arrangement of organizational elemnnt to exterior space in APT. complex have been regulated by law and regulations as the buildings coverage and floor space index, but housinghold and accessibility to the racility will be simultaneously considered to raise Quality of the residential environoment. The main user behavior to exterior space in APT. complex was practical activity and the user behavior pattern by week and among APT. complex were found similiarly. In the ratio of use to exterior space in APT. Complex, that of high-rise residents were lower than that of lowrise residents. In the degree of satisfaction by property of variables to exterior environment In APT. comples, physical of buildings, social - psychologic, managerial economical, physical property of exterior space were estimated positively, but properly of facility were estimated negatively. The degee of satisfaction to exterior environment in APT. complex was highly Influenced by green space, site size. As a result of ractor analysis, the four factors were drawn out from exterior environment in APT. complex. and the factors that have an effect on the degree of residents' satisfaction by factorscore were found in the order of importance as fallow ; managemental, physical, environmental, organizalional factor. Therefore, devilopment of APT. complex should be considered in a view of environmental psychology according to physical organization for used in the future. It is recommended that this problems should be necessitated to be more deeply studies in the future.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.2
• /
• pp.347-354
• /
• 1999

Generally, transceiver is operated to the remote control for the purpose of breading the traffic zone which is established on a mountain peak, island and building top using private line. Therefor, the remote control system of public radio station have been the very important role that is decision the quality relate to the quickness, accuracy, safety of communication on old type transceiver of SSB, VHF etc. In the case of using the only 1 private line which is exchanged voice signal with data signal had mixed or interrupted for up/down of channel, PTT control and monitoring of transmission channel and power. The up/down of channel and PTT control is according to the ASK and the data of monitoring is transfered to the FSK modulation, additional algorithm is studied on the serial protocol and traffic sequence using the MCS-51 processor in the simplex communication methode.