• Journal of the Korean Geographical Society
• /
• v.38 no.1
• /
• pp.1-15
• /
• 2003

The basic data of groundwater quality such as water temperature, pH and electric conductivity were collected for 6 months from July to December 2000 in Yongnup. The results are as follows; the values of groundwater quality at the unsaturated points were beyond the distribution range when compared with those at fully saturated points. Temperature of groundwater in Yongnup increased with the rising of watertable. The values of pH were usually measured between 5.0 and 6.0, but sometimes those of lower than 4.0 were indicated. The value measured at unvegetated ground was higher than that at covered area. Also, the electric conductivity increased with the rising of watertable. The values of water quality between groundwater and surface water were quite different from each other and varied with seasonal change. The measured values of pH and electric conductivity had a proportional relationship.

• Journal of the Society of Naval Architects of Korea
• /
• v.36 no.4
• /
• pp.95-104
• /
• 1999

Use of the ultra thick plate is being continuously increased in large off-shore structures, ships, bridges and skyscraper construction, due to increasingly large-sized steel structures and it seems that this trend will be maintained. But, occurrence of the lamella tearing has been reported in ultra thick plate used for construction. It is reportedly caused by impurities such S(sulfur), P(phosphorus) and others accumulated in the ultra thick plate's centerline in the thickness direction with strip shape or by restraint residual stress caused by the welding. In the ultra thick plate made by continuous casting method, occurrence of lamination is difficult to avoid because of the properties of production procedure. Therefore, with a view to reducing the lamella properties, this report tries tearing in the steel structure in the view of welding strength rather than metallic properties, this report tries to seek the optimum groove and welding procedure by using the computer simulation based on FEM(Finite Element Method).

• The Journal of the Korea Contents Association
• /
• v.13 no.9
• /
• pp.410-417
• /
• 2013

Long-term behavior analysis considering construction sequence should be performed in the design and the actual construction of reinforced tall buildings. Most of the analytical studies on this subject, however, has not been applied directly to the structural design and the construction caused by the simple approach. As the axial force redistribution of shores and columns is time-dependent, the actual construction sequence with the placement of concrete, form removal, reshoring, shore removal, and the additional load application is very important. Object-oriented analysis program considering construction sequence, especially time-dependent deformation in early days, is developed. This system is composed of input module, database module, database store module, analysis module, and result generation module. Linkage interface between the central database and each of the related module is implemented by the visual c# concept. Graphic user interface and the relational database table are supported for user's convenience.

• Fire Science and Engineering
• /
• v.5 no.3
• /
• pp.5-14
• /
• 1991

Now a days, according that the occurrence of industrial disaster is on the increase, the necessity of protective goods is increasing. Specially estimate of safety helmet for protect of head is very important. On this, in this paper, amplification ratio and natural frequencies of fire safety helmet and general safety helmet are estimated by falling impect test and frequency analysis. Also. trend of damping is estimated by using these test results. And we know that the fire safety helmet is more safe than general safety helmet for protect of head.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.16-16
• /
• 2015

오늘날 전 세계적으로 가속화되는 기상이변에 따라 돌발성, 국지성 폭우 및 폭설의 빈도가 급격히 증가하는 추세이다. 이 같은 돌발기상 현상은 고층 건물과 인구의 과밀화로 인해 열섬효과가 자주 발생하는 도심지에서 특히 높은 발생률을 보이며, 그로 인한 막대한 인명 및 재산상의 피해가 발생하고 있는 실정이다. 하지만 이러한 돌발성 강수 현상들은 주로 저고도에서 생성 및 발달되며, 그 수명은 2~3시간에 불과하기 때문에 현재의 국내 기상관측 시스템으로는 예측 및 예보에 많은 어려움을 겪고 있다. 현재, 이러한 문제점을 해결하기 위해 국내 관련 기관들에서는 도심지를 중심으로 한 저층 기상 관측을 위한 소형 레이더 네트워크 구축을 계획하고 있다. 그와 함께, 본 논문에서는 향후 도입될 소형 레이더 네트워크의 활용성을 증대시키고, 기상재해의 피해를 줄이는 방법으로써, 구글 어스의 지도 서비스를 기반으로 한 기상 레이더 자료 활용 실시간 돌발성 기상재해 감시/추적 및 경보 시스템 플랫폼을 제안한다. 제안하는 플랫폼은 전 세계적으로 통용되는 GIS 엔진으로서, 높은 확장성이 장점인 구글어스 플랫폼을 바탕으로 하며, 레이더 자료 분석 도구, 위험도 판별 도구 및 자료 표출/경보 도구 등으로 크게 세 가지의 기술도구 집단으로 구성된다. 제안한 플렛폼 상에서 시뮬레이션을 통해 구글어스 기반에서 레이더 누적강수량의 실시간 처리와 3차원 GIS 기반에서의 직관적인 경보 메시지 표출을 구현하였으며, 향후 각 기술 도구들 상의 기법들을 연구 및 개선함으로써 국토관측센서 네트워크 및 기상 재해 예 경보 체계를 위해 활용되어질 수 있을 것으로 기대한다.

• Korean Journal of Construction Engineering and Management
• /
• v.16 no.6
• /
• pp.63-72
• /
• 2015

The importance of the appropriate use and procurement of Safety and Health Expense has been increasing along with the recent increase of construction projects in height, size and complexity. However, the current standards for deducting the Safety and Health Expense have shown limitations in applying the properties and environment of the construction project due to its Safety and Health Expense Rate's classification method. Therefore, the purpose of this study is to develop a prediction model for the Safety and Health Expense that enables the consideration of different environment and properties of construction projects. The study uses multiple regression analysis to analyze the Safety and Health Expense of Ordinary(A) of less than 0.5 billion WON. The research results have shown that the use of multiple regression analysis reduces the error rate to 4.38% which the current standard calculation method have shown 18.48%. Therefore, the use of the suggested model provides reliable Safety and Health Expense prediction values that considers the properties of the project. It is expected that the results of this study contributes to the effective safety management by providing the appropriate amount of Safety and Health Expense to the project. In this study, only projects of less than 5 billion WON have been considered in the analysis. Therefore, more data is required for future studies to suggest an overall Safety and Health Expense predict ion model that covers the whole construction industry.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.4
• /
• pp.297-303
• /
• 2018

With the changing trend of the building construction to high rising and large scaling, the underground structure has been increased, and its usage also increased and variety. Hence, to protect the underground structure against underground water, various water proofing methods has been developed. Among the many water proofing methods, the combined water proofing method using both asphalt seal and sheet has been widely used to secure the sufficient performance and decrease the construction failure. However, during the summer period of extremely high temperature conditions, the asphalt sealing materials were separated and leaked into the structure. Therefore, the aim of the research is to provide the quality standard of asphalt sealing material based on the various temperature changes depending on seasons. According to the experimental results, the temperature of the sealing materials applied on the slab was increased up to $54^{\circ}C$ which was $3^{\circ}C$ higher than the structure temperature of $51^{\circ}C$. Based on the melting test for asphalt sealing materials applied on the outside wall of the structure, in the case of water-dispersing typed materials showed significant melting down due to its slow evaporation and low viscosity. Furthermore, from the accelerated test conducted indoor conditions, a solvent-type and water-dispersing typed materials showed significant melting down due to their low viscosity and melting point in ambient conditions. Based on these results, viscosity and melting point are found as the important factors on asphalt sealing materials' quality, and it is necessary to designate the quantitative level of the viscosity and melting point for quality control.

• Geophysics and Geophysical Exploration
• /
• v.14 no.1
• /
• pp.7-17
• /
• 2011

We have developed an inversion code for three-dimensional (3D) resistivity tomography including the anisotropy effect. The algorithm is based on the finite element approximations for the forward modelling and Active Constraint Balancing method is adopted to enhance the resolving power of the smoothness constraint least-squares inversion. Using numerical experiments, we have shown that anisotropic inversion is viable to get an accurate image of the subsurface when the subsurface shows strong electrical anisotropy. Moreover, anisotropy can be used as additional information in the interpretation of subsurface. This algorithm was also applied to the field dataset acquired in the abandoned old mine area, where a high-rise apartment block has been built up over a mining tunnel. The main purpose of the investigation was to evaluate the safety analysis of the building due to old mining activities. Strong electrical anisotropy has been observed and it was proven to be caused by geological setting of the site. To handle the anisotropy problem, field data were inverted by a 3D anisotropic tomography algorithm and we could obtain 3D subsurface images, which matches well with geology mapping observations. The inversion results have been used to provide the subsurface model for the safety analysis in rock engineering and we could assure the residents that the apartment has no problem in its safety after the completion of investigation works.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.36 no.2
• /
• pp.14-23
• /
• 2008

Ran Gang is a huge, attractive river which meanders through Seoul, the capital of South Korea. However, during the modernization of Seoul, the river gradually lost its natural beauty and healthy condition. Han Gang Renaissance is a project to upgrade the look of the Seoul waterfront, by overcoming this disaster and reorganizing the surroundings of Han Gang. This research articulates the design strategies and description of the prizewinning work of the International Design Competition for Yeouido Riverside Park that was linked to the Han Gang Renaissance Project. There are three key points that basically speak to the identity of the new waterfront, Yeouido Riverside Park. First, the current day Yeouido was recreated as an artificial island through the rapid expansion of the city and the initiation of the shore protection works. However, because it is the only island still remaining that shows the history of Han Gang, the park was designed to be the place which preserves the lyric of sand island and the emotional memory of riverside. Secondly, among the six districts of the Han Gang Renaissance Project, the two districts that are facing each other, Yongsan and Yeouido, are the central areas promoting international finance and business. Despite Yongsan's complete urban image, the exquisite harmony of pastoral scenes and skyscrapers of the Yeouido waterfront is presented to develop an active mutual relation with Yongsan. Lastly, this design scheme re-establishes the relationship between this competition's site, Yeouido Riverside Park, and a neighboring site, Yeouido Park.

• Journal of the Economic Geographical Society of Korea
• /
• v.1 no.2
• /
• pp.85-102
• /
• 1998

The Changing Characteristics of Office Location in Central Seoul In recent years, central Seoul has been experiencing a dynamic transformation. In the process of reorganization of urban industrial structure including tertiarization and quaternarization of the economic base of Seoul, business services are growing very rapidly and large scale urban renewal projects are agilely implemented. Downtown office activities become a nucleus for economic performance of Seoul and high-rise office buildings steer the landscape transformation of central Seoul. Even though there appear to exist some evidences that office districts have dispersed to several subcenters, major office activities are still concentrated in the central Seoul. This paper redefines office industry in a narrow meaning comprising only relevant economic sectors and office buildings as office activity-functioning units. It then explores the industrial networking and territorial specialization of office activities focusing on the dual process of concentration and dispersion in Seoul. The changing characteristics of the downtown linkages of office activities in this post-industrial era transforms the spatial economy of central Seoul into more flexible and volatile, while territorial concentration of power and control functions are fortified at the same time. Finally, the paper addresses the development of manufacturing-tertiary-quaternary industrial complex, which can be regarded as new industrial clusters, selling cultural economy of urban space and possessing placeness or images for clients and customers, in relation to urban competitiveness and territorial specialization of large metropolitan areas.