• 한국초전도학회:학술대회논문집
• /
• v.9
• /
• pp.33-33
• /
• 1999

• Proceedings of the KIEE Conference
• /
• 1998.07e
• /
• pp.1850-1851
• /
• 1998

Using the "MAGIC" code, computer simulation is performed to design a cathode structure which provides a radial distribution of electron beam density matching the field distribution of the $TM_{05}$ mode. Thus, very narrow band $TM_{05}$ mode microwave radiation can be generated in an open end waveguide. The simulation results show that the vircator can indeed be operated at the selected frequency 10.2GHz with a very narrow bandwidth(${\Delta}{\omega}/{\omega}$ < 1%).

• Proceedings of the Korean Vacuum Society Conference
• /
• 2006.02a
• /
• pp.115-115
• /
• 2006

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.10
• /
• pp.935-940
• /
• 2016

Directed energy weapon enables to radiate the concentrated energy so as to result in distraction and overload of the target electronics. Analysis on effectiveness of weapon system can be important consideration in order to determine performance and design weapon system. In this paper, air defense weapon system, which is one of directed energy weapon system is studied. In order to analyze the effectiveness, the reflector antenna with high power circularly polarized horn antenna is designed, and power density in axial effective area is simulated and calculated using Friis formula. Through the study, the validity of antenna system is verified, and the effectiveness of directed energy weapon system on the target is evaluated.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.182.1-182.1
• /
• 2016

전자빔의 운동에너지를 변화시켜 전자기장을 발생시키는 진공튜브 장치는 기본적으로 전자빔 발생부인 전자총을 핵심 구성부로 사용한다. 이러한 전자총을 이용하는 진공튜브로는 핵융합을 위해 플라즈마 가열용의 RF를 발생시키는 자이로트론 튜브와 방사광 가속기에서 전자를 가속시키는데 이용되는 클라이스트론 튜브 등이 있으며, 군사적으로는 레이더를 비롯하여 유도미상일에 들어가는 탐색기, 전투기에서 사용되는 송수신용 마이크로파 발생장치 등의 핵심부품인 진행파관 진공튜브 등이 있다. 이러한 응용분야에서는 기본적으로 고출력의 전자파를 필요로 하기 때문에 반도체를 이용한 장치로는 그 성능을 구현할 수 없다. 따라서 열음극을 사용하는 전자총을 기반으로 한 다양한 형태의 진공튜브 장치가 주로 이용되고 있다. 현재 고출력 마이크로파 진공튜브용 열음극 전자총은 대부분 외국에서 수입하고 있는데 그 이유는 전자총의 핵심 부품인 열음극 캐소드를 국내에서 개발하지 못하였기 때문이다. 하지만 본 연구에서는 텅스텐 기반의 함침형 열음극 캐소드를 국내에서 자체 개발하는데 성공하였다. 전통적으로 미국에서 개발해온 함침형 열음극 캐소드는 텅스텐 소결체에 기공을 학보하고 여기에 Ba을 중심으로 한 알칼리성 물질들을 일정비율로 혼합하여 함침한 것으로 일함수 2.1~2.3 eV 수준의 물성을 갖는다. 이에 따라 방출할 수 있는 전류의 양은 운용 온도 $1000^{\circ}C$ 정도에서 전류밀도로 대략 수 $A/cm^2$ 수준이다. 본 연구에서 개발한 캐소드는 S-type으로 알려진 것으로 BaO : CaO : $Al_2O_3$ = 4 : 1 : 1 비율로 함침되었다. 고진공장치에서 전류측정 결과 $1040^{\circ}C$에서 $10.6A/cm^2$의 전류밀도를 기록하였으며 이에 대하여 Richardson-Dushman equation으로 계산하였을 때, 약 1.9 eV의 일함수를 갖는 것을 알 수 있었다. 이는 현재 많은 응용분야에서 사용하고 있으며 함침형 캐소드에 Os이나 Ir 등의 물질을 코팅하여 일함수를 낮추고 전류밀도를 향상시킨 M-type 캐소드의 결과와 유사한 수준이다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.5
• /
• pp.863-871
• /
• 2003

In this paper, we design a high stable Ku-band phase-locked dielectric resonant microwave oscillator with the gate voltage controls of p-HEMT. By adapting the nonlinear equivalent elements which affects phase noise of microwave oscillator, we optimize the nonlinear elements of p-HEMT to have low phase noise operation. Using the scattering parameters according to bias voltages, we designed the gate voltage control microwave dielectric resonant oscillator and phase-locked loop circuits is applied to have the high stable operations. Designed microwave oscillator as a local oscillator of digital microwave communication shows that output power is 9.17dBm at 10.75GHz and it's phase noise is -88dBc/Hz at 10KHz offset frequency.

• Journal of Satellite, Information and Communications
• /
• v.10 no.1
• /
• pp.88-91
• /
• 2015

Wireless power transmission (WPT) is a technology using free space as a conductor for transmitting electric power, which aims to transfer not just the transmission signal but also the electrical energy itself. This paper takes issue with the microwave wireless transmission technology utilizing in long-distance transmission. To construct the WPT system, several components are needed, such as RF Oscillator which converts AC power to RF through DC status, high gain antenna and RF rectifier that converts RF back to DC. The array topology is good a candidate for wide use. The objective of this research is to study the efect of the WPT systmem on electric power system.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.5
• /
• pp.389-392
• /
• 2018

Herein, a horn antenna that has the maximum back lobe reduction characteristic using a corrugated structure at 1.57 GHz for a high-power microwave system is proposed. The back-lobe characteristics of the proposed antenna was optimized using simulation as the number of corrugated structures increase, and the three-staged corrugated structure was designed. Consequently, the front-to-back ratio(FBR) of the fabricated antenna is 47.2 dB, which is improved by 23.7 dB based on that of the basic horn antenna, i.e., 23.47 dB.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.5
• /
• pp.782-787
• /
• 2000

The monolithic single-pole three-throw(SP3T) GaAs PIN diode switch circuit for the broadband and high power application was designed, fabricated and characterized. To improve the power handling capability, buffer layers of the diode employ both low temperature buffer and superlattice buffer. The diode show the breakdown voltage of 65V and turn-on voltage of 1.3V. The monolithic integrated switch employed microstrip lines and backside via holes for low-inductance signal grounding. The vertical epitaxial PIN structure demonstrated better microwave performance than planar type structures due to lower parasitics and higher quality intrinsic region. As the large signal characteristics of the fabricated SP3T MMIC switch, the insertion loss was measured less than 0.6dB and the isolation better than 50dB when the input power was increased from 8dBM to 32dBm at 14.5GHz.

• Journal of Sensor Science and Technology
• /
• v.12 no.4
• /
• pp.185-190
• /
• 2003

Recently, sensors which use the infrared light, supersonic waves, and electromagnetic waves have been used for many applications to detect information of the object. For these sensors, the accompanying system which utilizes the sensor should be systematically developed. In this paper, a general microwave radar sensor system is briefly described, and then basic applications of a CW doppler radar sensor system are introduced. For the CW doppler radar sensor applications, a highly-stable, low-cost Dielectric Resonator Oscillator (DRO) has also been designed and implemented, which can be used for commercial microwave sensor systems. The implemented DRO has output power of +5.33 dBm at 12.67 GHz and phase noise of -108.5 dBc/Hz at the 100 kHz offset frequency.