• Clean Technology
• /
• v.15 no.4
• /
• pp.273-279
• /
• 2009

$SF_6$, which has a high global warming potential, can be decomposed to sulfur and fluorine compounds through hydrolysis by $H_2O$ or oxidation by $O_2$ over solid acid catalysts. In this study ${\gamma}-Al_2O_3$ was employed as the solid acid catalyst for the abatement of $SF_6$ and its catalytic activity was investigated with respect to the reaction temperature and the space velocity. The catalytic activity for $SF_6$ decomposition by the hydrolysis reached the maximum at and above 973 K with the space velocity of $20,000\;ml/g_{-cat}{\cdot}h$, exhibiting a conversion very close to 100%. When the space velocity was lower than $45,000\;ml/g_{-cat}{\cdot}h$, the conversion was maintained at the maximum value. On the other hand, the conversion of $SF_6$ by the oxidation was about 20% under the same conditions. The SEM and XRD analyses revealed that the ${\gamma}-Al_2O_3$ was transformed to ${\alpha}-Al_2O_3$ during the hydrolysis and to $AlF_3$ during the oxidation, respectively. The size of $AlF_3$ after the oxidation was over $20\;{\mu}m$, and its catalytic activity was low due to the low surface area. Therefore, it was concluded that the hydrolysis over ${\gamma}-Al_2O_3$ was much more favorable than the oxidation for the catalytic decomposition of $SF_6$.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.1
• /
• pp.40-47
• /
• 2013

The similarity in internal flow of solid and hybrid rocket suggests that hybrid rocket combustion can be susceptible to instability due to vortex sheddings and their interaction. This study focuses on the evolution of interaction of vortex generated in pre-chamber with other types of vortex in the combustor and the change of combustion characteristics. Baseline and other results tested with disks show that there are five different frequency bands appeared in spectral domain. These include a frequency with thermal lag of solid fuel, vortex shedding due to obstacles such as forward, backward facing step and wall vortices near surface. The comparison of frequency behavior in the cases with disk 1 and 3 reveals that vortex shedding generated in pre-chamber can interact with other types of vortex shedding at a certain condition. The frequency of Helmholtz mode is one of candidates resulting to a resonance when it was excited by other types of oscillation even if this mode was not discernable in baseline test. This selective mechanism of resonance may explain the reason why non-linear combustion instability occurs in hybrid rocket combustion.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.219-219
• /
• 2016

유기발광소자는 저전력, 빠른 응답속도, 고휘도 및 자체발광 등의 장점들 때문에 고체 광원과 플렉서블 디스플레이로 연구가 진행되고 있다. 유기발광소자는 유기 발광층을 인광물질로 사용 함으로서 100 % 내부양자 효율을 이루고 있지만 공기와 유리기판의 계면과 유리 기판과 ITO 계면에서 발생하는 내부 전반사 효과와 유기물과 ITO 기판 사이에서 발생하는 웨이브 가이드 효과 등으로 인해 발광량의 약 20 %만을 외부로 추출 할 수 있다. 따라서 유기발광소자의 광 추출 효과를 증가시키기 위해서 소자외부에 아웃커플링 필름 또는 마이크로렌즈 어레이 필름을 부착시키는 방법, 금속 나노 입자를 유기발광소자 내에 삽입하여 표면 플라즈몬 효과로 인한 광추출 효율을 높이는 방법 등이 제시되고 있다. 본 연구에서는 Au-ZnO 나노복합체를 간단한 졸겔법을 이용하여 양극 버퍼층으로 사용하여 그에 따른 계면, 전기적 및 광학적 특성을 분석하였다. Au-ZnO 나노복합체를 포함한 tris(8-hydroxyquinolinato) aluminium (Alq3) 발광층에서 ZnO를 포함한 Alq3 발광층보다 엑시톤 수명이 빠르게 감소하는 것을 시간 관련 단광자 계산(Time-Correlated Single Photon Counting) 측정을 통해서 알 수 있었다. 이러한 결과는 Au 금속 나노입자의 플라즈몬 흡수 파장과 Alq3 발광층에서 생성되는 발광 파장이 겹쳐서 효과적인 공명 에너지 전달효과로 인해 Alq3 발광층의 발광성질이 향상된 것을 의미한다. Au-ZnO 나노복합체와 ZnO 나노입자를 가지는 유기발광소자의 전류 효율은 50 mA/cm2 에서 각각 2.27와 1.83 cd/A 가지는 것으로 확인 되었다. 또한 Au-ZnO 나노복합체와 ZnO 나노입자를 사용한 유기발광소자의 전압-전류밀도가 유사한 것을 확인 할 수 있는데 이는 Au 금속 나노입자가 ZnO 나노입자의 정공 주입능력을 저하시키지 않는 것을 의미한다.

• Economic and Environmental Geology
• /
• v.52 no.6
• /
• pp.595-604
• /
• 2019

The purpose of this study was simply to obtain gold through a microwave-nitric acid experiment of invisible gold concentrate with the use of filter paper. For the purpose, this study conducted a microwave-nitric acid leaching experiment and examined nitric acid concentration. As a result of the experiment, this study discovered that Fe, Te and Ag were completely leached in the leaching solution whereas Au was not determined in all of the nitric acid conditions. The leaching solution was filtered with three filter papers and then these filter papers were analyzed with SEM/EDS. As a result of the EDS analysis, Au was detected in all of the surface and cross-section of the 1st, 2nd and 3rd filter papers. As the three filter papers containing solid-residue were analysed in the lead-fire assay, gold particles were found in all of the nitric acid conditions. In the lead-fire assay, maximum gold(452.50g/t) was recovered when nitric acid concentration was 6M and microwave leaching time was 12mins.

• Applied Chemistry for Engineering
• /
• v.10 no.7
• /
• pp.1020-1027
• /
• 1999

Heteropoly acid(HPW) catalysts supported on three different carriers, an amorphous silica, MCM-41 and MCM-48, with different loadings and calcination temperatures have been prepared and characterized by X-ray diffraction, nitrogen physorption, infrared spectroscopy, and $^{31}P$ magic angle spinning NMR. From the result of IR and NMR, it was shown that HPW retains the Keggin structure on the supported catalysts. No HPW crystal phase was developed even at HPW loadings as high as 35 wt % on the MCM-41 and 65 wt % MCM-48. Thus, HPW appeared to form finely dispersed species. In the hydrolysis reaction of di, bis, tri-pentaerythritol, HPW/MCM-41, 48 exhibited higher catalytic activity than $HPW/SiO_2$ or HPW.

• Journal of the Korean Chemical Society
• /
• v.50 no.5
• /
• pp.404-414
• /
• 2006

this study we analyzed and improved an experiment measuring chemical reaction rates introduced in the high school science textbooks through an understanding of the phenomena observed in carrying out the experiment. For this purpose, the contents of textbooks related to the experiment were analyzed, and the problems observed in carrying out the experiment were addressed through experimental analysis. When the experiment was carried out by the method of aquatic transposition presented in textbooks, the observed volume change of H2 gas was delayed and chemical reaction rate was increased in the early stage of reaction period. To resolve these problems, an improved method for measuring the reaction rates was suggested. In the improved experiment the reaction rate was measured to be constant on time, which was interpreted in terms of the concentration of H+ and the surface area of magnesium.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2004.06a
• /
• pp.418-418
• /
• 2004

풀, 토양 또는 지하수와 같은 환경시료 중에 포함된 미량 우라늄을 분석하기 위하여 핵분열 트랙 기입법을 이용하였다. 시료 전처리 방법으로 지하수 시료는 질산 산성으로 만든 후, 토양시료는 질산과 불산을 이용하여 용액화 하였으며, 풀 시료는 전기로를 이용하여 회화한 후, 질산과 불산을 이용하여 용액화 하였다. 이 환경시료 전처리용액들을 각각 0.1mL를 0.9mL Collodion 분산용액에 섞은 후, 우라늄 표준용액과 함께 플라스틱 판($6{\times}6\textrm{cm}^2$) 위에 10$\mu\textrm{\ell}$씩 점적, 건고 시키고 핵분열 트랙기입법을 이용하여 우라늄 농도를 분석하였다. 핵분열 트랙기입법을 위한 중성자조사는 한국원자력연구소 하나로 연구용원자로(열중성자 선속: $2.7{\times}10^{13}n/\textrm{cm}^2{\cdot}sec^{-1}$)에서 10분간 하였으며, 6.25M NaOH 용액($60^{\circ}C$)을 이용하여 10분간 화학 에칭 하였다. 고체트랙검출기 표면에 생성된 핵분열 트랙들은 광학현미경과 image analyzer system을 이용하여 관찰하고 계수하였다. 시료와 같이 점적한 우라늄 표준용액을 이용하여 우라늄 농도에 대한 단위면적당 트랙 수의 상관관계를 구하였으며, 이를 이용하여 시료 내 우라늄 농도를 결정하였다. 본 실험의 결과에 대한 검증을 위하여 동일 시료용액을 분리관을 이용한 전처리 과정을 거친 후 ICP-MS를 이용하여 분석하였다. 우라늄의 선택적 분리를 위하여 U-TEVA 추출크로마토그래피 분리관을 이용하였다. 본 연구의 핵분열 트랙기입법을 이용하여 환경시료를 분석하는 방법은 일반적인 분광법을 이용할 경우, 문제가 되는 방해 원소의 분리를 위한 전처리 과정이 불필요한 장점을 가지고 있으며, 1ng 정도의 미량 우라늄을 분석할 수 있었고, ICP-MS 결과와 20% 오차 이내에서 일치하였다.

• Korean Journal of Medicinal Crop Science
• /
• v.13 no.3
• /
• pp.105-108
• /
• 2005

Culture conditions for plant regeneration of Camellia japonica were achieved by organogenesis in explants of cotyledon. Seed cotyledons were cultured on MS medium containing various auxin, 2,4-D or NAA and cytokinins BA. The adventitious shoot buds were efficiently formed without embryogenesis on the basal region of cotyledon cultured on MS medium supplemented with $0.1\;{\mu}g/m{\ell}$ 2.4-D and $1\;{\mu}g/m{\ell}$ BA. Seed cotyledons could be used as a source of explants in experiments of genetic transformation of the genotypes evaluated for improving the efficiency of production of transgenic Camellia plants.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.12
• /
• pp.59-66
• /
• 2006

To understand the role of helical geometry on the regression rate enhancement, two competing underlying mechanisms such as turbulence enhancement and swirling motion production were studied by numerical calculations. Experimental results showed that the enhancement of heat transfer rate has the very close relation to the increase in regression rate even though the percentage of increase in heat transfer rate is different from that in regression rate. This discrepancy is presumably due to the change of turbulent flow feature caused by so-called "blowing mass flux" from the fuel surface. In this regard, the results of RANS calculation show that the blowing velocity is responsible for the reduction of the swirl generation and the increase in the turbulent kinetic energy. And the dominancy of one of the mechanisms causes the increase in the regression rate. Meanwhile, the increase in turbulent kinetic energy due to the mixing of blowing flow and free stream flow does not contribute for the enhancement of the heat transfer rate to the surface because the blowing flow pushes boundary layer away from the solid surface.

• Polymer(Korea)
• /
• v.30 no.4
• /
• pp.318-325
• /
• 2006

Polypropylene-clay nanocomposites were studied by the modification of clay with amino silanes to introduce covalent bonds in nanocomposites, and prepared by melt-compounding with polypropylene, clay modified with amino silanes and maleic anhydride grafted polypropylene. The . .structure and surface properties of modified clay were determined by x-ray diffraction, infrared spectrum, and solid-state $^{29}Si$ nuclear magnetic resonance spectrum. The modification of clay with aminosilanes led to the increase of the silicate interlayers to about $19.8{\AA}$, the weakening effects of hydroxy group at $3650cm^{-1}$ and the signal of amine groups at -69 ppm proved that the modification had taken place.