• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 1997.11a
• /
• pp.109-114
• /
• 1997

훈소 또는 무염연소는 출화까지의 화재 초기의 성상을 특정지울 뿐만 아니라, 화재의 성장기에서도 일어나는데, 이에 따라 다량의 연기와 함께 고체 가연물의 낮은 온도에서 표면반응이 계속되므로, 유기질 고분자 분체의 다량의 가연성분 및 유독성을 갖게 되어 인적ㆍ물적 피해를 초래 할 수 있다. (중략)

• Journal of the KSME
• /
• v.27 no.5
• /
• pp.421-427
• /
• 1987

공력소음은 공기역학적 힘에 의해서나 또는 유동 내에서의 난류와 같은 유체운동에 의해서만 발 생되는 소리와 관계되며, 진동하는 바이올린 줄이나 확성기의 진동에 의해서 발생되는 즉, 고체 표면의 진동에 의해서 발생되는 고전적인 음향학과는 무관하다. 그리고 여기서는 주로 공력 소음문제를 다루되 자세하고 엄밀한 수학적 전개보다는, 간단한 실제적인 예를 들어서, 물리적 메카니즘을 가능한 한 자세히 기술하여 공력 소음의 이해를 돕고자 하였다. 또한 오래된 고전적 방법을 가능한 한 피하고 최근의 방법으로 설명하도록 하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.3
• /
• pp.576-583
• /
• 2018

Silicon carbide is considered to be a potentially useful material for high-temperature electronic devices, as its band gap is larger than that of silicon and the p-type and/or n-type conduction can be controlled by impurity doping. Particularly, porous n-type SiC ceramics fabricated from ${\beta}-SiC$ powder have been found to show a high thermoelectric conversion efficiency in the temperature region of $800^{\circ}C$ to $1000^{\circ}C$. For the application of SiC thermoelectric semiconductors, their figure of merit is an essential parameter, and high temperature (above $800^{\circ}C$) electrodes constitute an essential element. Generally, ceramics are not wetted by most conventional braze metals,. but alloying them with reactive additives can change their interfacial chemistries and promote both wetting and bonding. If a liquid is to wet a solid surface, the energy of the liquid-solid interface must be less than that of the solid, in which case there will be a driving force for the liquid to spread over the solid surface and to enter the capillary gaps. Consequently, using Ag with a relatively low melting point, the junction of the porous SiC semiconductor-Ag and/or its alloy-SiC and/or alumina substrate was studied. Ag-20Ti-20Cu filler metal showed promise as the high temperature electrode for SiC semiconductors.

• Polymer(Korea)
• /
• v.24 no.5
• /
• pp.589-598
• /
• 2000

In this study, various unsaturated polyester (UPE) resins were prepared from the condensation polymerization of mixtures of saturated (isophthalic acid : IPA) and unsaturated (maleic anhydride : MA) dibasic acids with propylene glycol (PG), neopentyl glycol (NPG). The critical surface tension (Υ$_{c}$) for the surface characteristics of a solid were estimated by Zisman plot, and the structure-property relationship was investigated by measuring the rheology of resins. The values of Υ$_{c}$ for glass of solid were 30.5 mNㆍm$^{-1}$ for UPE resin liquids. As the content of NPG in a PG/NPG glycol mixture increased, both the contact angle and the surface tension of the UPE resin liquids were found to decrease. The dynamic viscoelasticities of UPE resins with different glycol molar ratios were also measured. Shear rate dependence of viscosity and angular frequency dependence of storage, and loss modulus tended to decrease with increasing NPG content.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.11a
• /
• pp.272-273
• /
• 2015

DLC는 고경도, 화학적 안정성 및 고내식성, 내마모성 및 낮은 마찰계수로 인하여 여러 산업분야의 표면처리기술로 적용되고 있다. 하지만 DLC의 절연특성은 전기 산업 분야에 적용 한계가 있다. 이번 연구에서는 DLC를 연료전지 중 PEMFC(고체산화물 연료전지)의 금속 분리판 표면처리에 적용시키고자 하였으며, 높은 전도성과 고내식성의 Me-DLC박막 제작을 목표로 하였다. Cr을 Buffer layer로 하고 Cr과 DLC를 동시에 증착한 Cr-DLC 박막을 제작하였다. Cr-DLC코팅의 기계적 특성을 확인하기 위하여 나노인덴터를 이용하여 경도 및 탄성률을 측정하였으며, ball-on disk를 이용하여 마찰계수를 확인하였다. 각 샘플들의 전기전도성을 확인하기 위하여 4-point probe system을 이용하여 측정하였으며, 부식 저항 특성을 확인하기 위하여 1mole $H_2SO_4$ + 2 ppm HF 분위기의 전해질 내에서 동전위 분극시험을 통한 내식성 테스트를 하였으며, XPS를 통하여 Cr-DLC박막내의 구조적 특성을 확인하였다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.299-299
• /
• 2014

엔진블럭 사이를 왕복 운동하는 피스톤은 엔진블럭과의 마찰은 불가피한 상태일 수밖에 없으며 이렇게 된다면 엔진블럭 또는 피스톤의 파손, 변경이 있을 수밖에 없다. 피스톤에 대한 연구는 이러한 파손, 변경을 최소화시키기 위해서 내마모성, 내열성 그리고 내구성을 향상시키는데 목적을 두고 있다. 본 실험은 APS법으로 제작된 자기윤활복합코팅층을 준비해 레이저표면텍스처링을 넣어 마찰 실험을 하였다. 기지재로는 알루미나-지르코니아복합체를 사용하였고, 고체윤활제로는 $CaF_2$ 및 $BaF_2$을 사용하였다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.05a
• /
• pp.311-314
• /
• 2009

A two-dimensional thermal response and ablation simulation code for predicting charring material ablation and shape change on solid rocket nozzle is presented. For closing the problem of thermal analysis, Arrhenius' equation and Zvyagin's ablation model are used. The moving boundary problem and endothermic reaction in thermal decomposition are solved by rezoning and effective specific heat method. For simulation of complicated thermal protection systems, this method is integrated with a three-dimensional finite-element thermal and structure analysis code through continuity of temperature and heat flux.

• The Journal of Natural Sciences
• /
• v.10 no.1
• /
• pp.1-7
• /
• 1998

A Lennard-Jones fluid layer adsorbed on a smooth solid surface was studied at coverages $\theta$ ~ 0.8 to 1.8 on an isotherm by performing intensive grand canonical Monte Carlo simulations. The results clearly show a picture of two-step melting process which used to be observed in recent thermodynamic measurements of argon monolayer melting on graphite. The observed melting process consist of an abrupt density change followed by a gradual transition. Snapshots of monolayer configurations indicate that the creation and dissociation of a dislocation pair are involved in the melting mechanism. Taking the effect of system size into account, it is suggested that, while the abrupt density change may be not related to the theory of Kosterlitz, Thouless, Halperin, Nelson, and Young (KTHNY), the second gradual transition is probably a KTHNY-type melting transition.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.3
• /
• pp.49-55
• /
• 2003

This paper studied characteristics of surface discharge and tracking phenomena on the surface of solid insulators in Liquid Nitrogen(LN2) noticed as a cooling medium of high temperature superconductor. In order to investigate the bubble effect which have much influence on electric surface discharge in Liquid Nitrogen, knife type electrode and plane electrode were formed oppositely with A-mode, B-mode and C-mode configuration. It is considered that these result are fundamental data for electric insulation design of superconductor and cryogenic application machinery which will be studied and developed in the future.

• Tribology and Lubricants
• /
• v.38 no.5
• /
• pp.222-226
• /
• 2022

Between diaphragms made of stainless steel (SUS), which is the main component of a hydrogen gas compressor, micro-slip occurs owing to repeated bending, resulting in scratches on the surface. The surface scratch of the compressor part is a problem with airtightness, which reduces the efficiency of the compressor; in severe cases, damage is a possibility. In this study, the changes in friction and wear characteristics due to the surface polishing of SUS and carbon-based solid lubricant films (graphene and CNT) were analyzed. Bare SUS, polished SUS, graphene film, and CNT film specimens were prepared. The surface roughness of the SUS was significantly reduced by surface polishing but increased by carbon-based solid lubricating films. In contrast, the friction coefficient maintained a similar value after surface polishing but was significantly reduced by the carbon-based solid lubricant films. In particular, the graphene film exhibited the lowest initial friction coefficient, while the CNT film exhibited the lowest overall average friction coefficient. Regarding the wear rate, polished SUS exhibited the lowest value, but the surface condition of the wear track showed that the carbon-based solid lubricating films were relatively less damaged. Although the wear rate measured was largely attributed to the solid lubricating film peeling off, the SUS surface under the film was considered protected.