Journal of the Computational Structural Engineering Institute of Korea
/
v.19
no.3
s.73
/
pp.259-269
/
2006
In this paper, the stress intensity factor, energy release rate and crack opening displacement are computed using the finite element method for axisymmetric viscoelastic cylinders with the penny-shaped and circumferential cracks. The triangular elements with quarter point nodes are used to describe the stress singularity around the crack edge. The analytical solutions are also derived by using the elastic-viscoelastic correspondence principle and compared with the numerical results to show the validity and accuracy of the presented method. Viscoelastic materials are assumed to behave elastically in dilatation and like a three-parameter standard linear solid.
Kim, Gi-Dong;Kim, Jun-Gon;Hong, Wan;Choi, Han-Woo;Kim, Young-Seok;Woo, Hyung-Joo
Proceedings of the Korean Vacuum Society Conference
/
1999.07a
/
pp.190-190
/
1999
박막 표면에 대한 경원소 분석법인 탄성 되튐 반도법을 개발하여 수소, 탄소, 질소등 분석에 이용하고 있다. 이때 입사 입자로 Cl 9.6MeV를 이용하였는데, 표적 표면에 탄소막이 흡착되는 현상을 발견하였다. cold trap 및 cold finger를 사용하여 진공도를 개선하므로서, 탄소막 흡착의 한 원인으로 알려져 잇는 chamber 주변의 진공도 변화를 시켜보았다. 하지만 전혀 탄소막이 생기지 않는 10-10torr 이하 진공을 만드는 것은 많은 비용과 장비를 필요로 하는 상당히 힘든 작업이어서, 이차적으로 탄소막이 표적 표면에 달라 붙게 하는 원인으로 추정되는 이차 전자의 발생을 고에너지 이온빔으로 조사하였다. 일반적으로 이차전자의 발생은 이온빔과 표적과의 충돌에 의한 고체 표면으로부터의 전자방출 현상으로 오래전부터 연구되어져 왔다. 여기에는 두가지 다른 구조가 존재하는 것으로 알려져 있다. 그 중 하나는 입사 입자의 전하와 표적 표면사이 작용하는 potential 에너지가 표적 표면의 일함수(재가 function) 보다 클 때에 일어나는 potential emission이다. 즉 표적 궤도에 존재하는 전자와 입사 이온빔 사이의 potential 이 표적의 전자를 들뜨게 만들고, 이 potential의 크기가표적의 표면 장벽 potential 보다 충분히 클 뜸 전자가 방출하는 현상을 말한다. 다른 또 하나의 방출구조로는 입사 이온이 표적 표면의 원자와의 충돌에 의해 직접저인 에너지 전달을 통한 전자 방출을 말하는데, 이를 kienetic emission(이하 KE)이라 한다. 본 연구에서는 Tandem Van de graaff 가속기로 고에너지 이온빔을 만들어 Au에 충돌시키므로서 kinetic emission을 통하여 Au에서 발생한는 이차전자의 방출 수율 및 에너지를 측정하였다.장구조로 전체 성장 양식을 예견할 수 있다. 일반적인 경향은 Ep가 커질수록 fractal 성장형태가 되며, Ed가 적을수록 cluster 밀도가 작아지나, 같은 Ed+Ep에 대해서는 동일한 크기의 팔 넓이(수평 수직 방향 cluster 두께)를 가진다. 따라서 실험으로부터 얻은 cluster의 팔 넓이로부터 Ed+Ep 값을 결정할 수 있고, cluster 밀도와 fractal 차원으로부터 각각 Ed와 Ep값을 분리하여 얻을 수 있다. 또한 다층 성장에 대한 거칠기(roughness) 값으로부터 Es값도 구할 수 있다. 양방향 대칭성을 갖지 않은 fcc(110) 표면과 같은 경우, 형태는 다양하지만 동일한 방법으로 추정이 가능하다. (110) 표면의 경우 nearest neighbor 원자가 한 축으로 형성되고 따라서 이 축과 이것과 수직인 축에 대한 상호작용이나 분산 장벽 모두가 비대칭적이다. 따라서 분산 장벽도 x-축, y-축 방향에 따라 분리하여 Edx, E요, Epx, Epy 등과 같이 방향에 따라 다르게 고려해야 한다. 이러한 비대칭적인 분산 장벽을 고려하여 KMC 시뮬레이션을 수행하면 수평축과 수직축의 분산 장벽의 비에 따라 cluster의 두께비가 달라지는 성장을 볼 수 있었고, 한 축 방향으로의 팔 넓이는 fcc(100) 표면의 경우 동일한 Ed+Ep값에 대응하는 팔 넓이와 거의 동일한 결과가 나타나는 것을 볼 수 있다. 따라서 이러한 비대칭적인 모양을 가지는 성장의 경우도 cluster 밀도, cluster 모양, cluster의 양 축 방향 길이 비, 양 축 방향의 평균 팔 넓이로부터 각 축 방향의 분산 장벽을 얻어낼 수 있을 것으로 보인다. 기대할 수 있는 여러 장점들을 보고하고자 한다.성이 우수한 시편일수록 grain의 크기가 큰 것으로 나타났고 결정성이 우수한 시편의 경우에서는 XR
Olmesartan affiliated to biopharmaceutics classification system class 2 is a poorly water soluble drug. For this reason, olmesartan showed a low bioavailability and a lot of difficulties in the process of designing the pharmaceutical formulation. We prepared the solid dispersions of olmesartan. We confirmed the dissolution rate of drug which was prepared by manufacturing. The pharmaceutical formulation of solid dispersions was designed by using PVP as water soluble polymer. We analyzed morphological feature of solid dispersion by employing a scanning electron microscope. Then, the crystalline property of solid dispersion was confirmed through X-ray diffraction and differential scanning calorimeter. Also, the chemical change of solid dispersion was confirmed by the Fourier transform infrared spectroscopy. In vitro dissolution test was used to analyze the dissolution rate of solid dispersion. The prepared solid dissolution olmesartan confirmed the dissolution rate in the pH 1.2. It was compared with olmetec and improved dissolution rate through solid dispersion.
Journal of the Korean Recycled Construction Resources Institute
/
v.4
no.4
/
pp.431-438
/
2016
Recently, Both rapid economic growth and high-quality native finishing materials demand in buildings such as local infrastructure facilities and cultural facilities have increased along with local quarries. So, increasing local quarries and environmental pollution occurred in quarries get the eyes to damaged area of the surroundings. As an example, carcinogen such as solid formed to fixing asbestos and dust have damaged to local resident. Especially, Radon gas released from asbestos can exist everywhere on earth, released soil and rock as radioactive substances, can be caused lung cancer followed by a smoking. When pollution source to indoor air quality that lacking ventilation rate of the residential building moved in a cycle, human responses such as headache, dizziness, etc. get appear, so on it threatened resident's physical condition. Thus, we need to urgent attention to reduction harmful substance. In the case of radon gas of the pollution source to indoor air quality in housing, it has characteristic that keep on going through half-life released from source, we need to control radon gas source than source removal. We set on vermiculite addition ratio to 10% which has harmful substances adsorption performance, proceed experiment to basalt waste rock addition ratio 50, 60, 70, 80(%). The result of an experiment, based on 'KS F 4035, precast terrazzo', we can be obtainable in the best terrazzo at basalt waste rock addition ratio 70%.
In order to investigate the relative mobility (RM) of dissolved elements during processes controlling major and trace element content, the concentrations of major, minor and trace elements were reviewed from the previous data of $CO_2$-rich waters and granites from Kangwon Province. The relative mobility of elements dissolved in $CO_2$-rich waters is calculated from $CO_2$-rich water/granite ratio with normalizing by sodium. The results show that gaseous input of magmatic volatile metals into the aquifer is negligible in this study area, being limited by cooling of the rising fluids. Granite leaching by weakly acidic, $CO_2$-charged water is the overwhelming source of metals. Poorly mobile element (Al) is preferentially retained in the solid residue of weathering, while alkalis, alkaline earth and oxo-hydroxo anion forming elements (especially As and U) are mobile and released to the aqueous system. Transition metals display an intermediate behavior and are strongly dependent on either the redox conditions (Fe and Mn) or solid surface-related processes (adsorption or precipitation) (V, Zn and Cu).
Proceedings of the Computational Structural Engineering Institute Conference
/
2010.04a
/
pp.314-317
/
2010
본 논문에서는 p-수렴 천이요소의 층별이론을 사용하여 균열을 갖는 적층판의 팻취보강 효과에 대해 알아보았다. 이 모델의 면내 변위는 각 구간별로 연속인 선형변화로 가정하였고, 두께방향으로의 면외 변위는 일정한 상수로 가정하여 적용하였다. 변위장의 정의는 적분형 르장드로 다항식을 적용하였다. 또한 에너지 방출률법과 VCCT 방법을 사용하여 응력확대계수를 산출하였다. 수치적분은 별도의 외삽법 없이 각층별의 절점에서 방생하는 적분 값을 바로 얻을 수 있는 가우스-로바토 적분법을 사용하여 계산하였으며, 수치예제를 통해 제안된 모델의 정확도와 기존의 3차원 고체요소를 사용한 것보다 동일한 정확도를 얻기 위해 휠씬 적은 요소 및 자유도가 사용됨을 알 수 있었다.
Proceedings of the Optical Society of Korea Conference
/
2000.02a
/
pp.274-275
/
2000
광결정(photonic crystal)으로 광원의 자발 방출을 조절하면 문턱전류 없는 레이저, 고효율 다이오드, 파장 크기에서 손실 없이 급격히 꺾을 수 있는 광도파로 등 기존의 광소자에서 얻을 수 없는 좋은 성능을 얻을 수 있을 것으로 예상된다. 이러한 광결정은 유전체를 파장정도 크기에서 주기적으로 배치시킨 인공적인 결정인데 고체에서 원자의 주기적인 배치로 전자가 전파할 수 없는 진동수 영역, 즉 밴드갭이 생기는 것과 유사하게 빛에 대해서 빛이 전파할 수 없는 진동수 영역인 광밴드갭(photonic bandgap)을 가진다. 그런데 관심있는 광영역에서 3차원 모든 방향으로 광밴드갭이 있는 구조물은 마이크로미터보다 작은 내부 구조를 가지는 복잡한 3차원 구조물로 제작이 어렵다. 이러한 어려움을 극복하기 위해 제작이 비교적 용이한 3차원 광밴드갭 구조물이 찾아지고 있다. 다른 접근 방법으로 평면(x-y)에서는 2차원 광밴드갭을 이용하고 제 3의 방향(z축)으로는 전반사를 이용하는 구조는 제작이 용이할 뿐만 아니라 처음부터 광원의 편광을 TE 또는 TM 모드로만 방출 되도록 준비해 줄 수 있으면 거의 3차원 광결정에서 얻을 수 있는 효과를 낼 수 있는 것으로 발표되었다.$^{(1)}$ 이 방법을 이용하여 최근에 미국의 캘리포니아 공과대학(Caltech)을 중심으로 레이저 동작을 보여 주었다.$^{(2.3)}$ 공기로 둘러싸인 얇은 유전체 평판에서 생기는 전반사와 평판 위에 2차원 삼각형살창(triangular lattice)에 구멍을 뚫어 얻는 2차원 광밴드갭을 이용해 3차원 공진모드를 형성하였다. 이러한 구조에서 1개만 구멍을 매워서 만든 공진기는 저온(143 K)에서 레이저 발진을 보였고 여러 개의 구멍을 매운 경우는 상온에서 펌프 펄스의 유지시간이 0.5% 인 경우 레이저가 동작하는 것을 보여주었다. 이는 구조내에서 열전도가 문제가 된다는 것을 의미하는데 위아래가 공기로 둘러 싸여 있어 발생한 열이 가는 유전체 네트웍을 통해서만 전달 될 수 있기 때문이다. (중략)
원자력 발전소 및 동위원소 사용기관에서 발생되는 가연성 고체 폐기물 및 유기폐액의 소각기술의 활용에 있어서 이의 안전성 확보를 위한 기술적 기준의 설정을 위한 고려인자들을 조사하였다. 국내외의 소각기술 활용현황을 알아보았고 본 기술의 국내 도입시 필요한 기술적 안전지침에 관한 외국의 사례를 조사하고 국내 관련 규정도 검토, 비교, 분석하여 주요 고려항목을 도출하였다. 안전성 확보를 위한 고려 항목을 크게 일반산업시설 적용항목, 원자력시설 상 안전조건, 소각시설의 기술적 요구사항, 기타 제반사항으로 나누어 제시할 수 있었다. 이들 내용은 기존 원자력 및 환경시설에 적용되는 안전성분석보고서 및 환경영향평가서로 작성될 수 있다고 보았으며 시설의 개요, 시설의 기술적 사항과 이에 따르는 안전을 위한 조건, 폐기물의 인수조건 등이 포함되며 기존 관련 법규의 적용 및 확인이 필요하였다. 기술적 사항에는 공정의 제염계수, 연소효율, 소각재의 형상, 배기가스의 방출농도, 작업자 및 인근주민의 피폭등이 확인되어야 하며 소각재의 처리방법 및 조건이 제시되어야 하고 소각재의 침출특성 등이 주요한 인자라고 보았다. 아울러 소각대상폐기물의 인수조건이 명시되어 소각성능에 따른 이의 안전성이 입증되어야 한다. 따라서 인허가 후 건설된 시설에서의 사용전 시험소각절차의 제시 및 이에 대한 관련 규제기관의 검사제도가 있어야 하며 품질보증절차 역시 관련지침에 따라 실시되어야 한다. 이와 같은 내용을 포함하는 안전기술지침의 설정이 절대적으로 필요하며 본 연구조사 결과의 활용이 기대된다.
Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
/
2008.06a
/
pp.181-181
/
2008
DLC (Diamond-like Carbon) 박막은 높은 내마모성과 낮은 마찰 계수, 화학적 안정성 및 적외선 영역에서의 높은 투과율과 낮은 광 반사도, 높은 전기저항과 낮은 유전율, 전계방출특성 등 여러 가지 장점을 가진 물질이다[1]. 최근에는 DLC 박막의 여러 장점들과 산과 염기 유기용매에 대한 화학적 안정성으로 인하여 인조관절에서 인공심장의 판막에 이르기까지 의공학 관련 부품소재로 응용되고 있으며 내구성과 안정성에 있어서 탁월한 성능을 보여주고 있다. 또한 DLC 박막의 높은 경도와 낮은 마찰 계수, 부드러운 박막 표면 (수nm의 RMS 거칠기)의 장점을 살려 마그네틱 미디어와 하드디스크의 슬라이딩 표면에 사용되어지고, MEMS (Micro-Electro Mechanical System) 소자와 MMAs (Moving Mechanical Assemblies)의 고체윤활코팅으로 활용하여 미세기계의 내구성과 성능 향상을 도모할 수 있다. 이와 같이 DLC 박막은 다양한 분야에 응용되고 있으며, 박막이 지닌 여러 가지 장점들로 인하여 더 많은 분야에 응용될 가능성을 지닌 물질이다. 그러나 수 ${\mu}m$이상의 두께에서 박막이 높은 잔류응력 (residual stress)을 가지고, 열에 취약하여 이의 개선에 관한 연구들이 진행되어 지고 있다 [2]. 따라서 사용되는 목적에 따라 용도에 맞는 양질의 DLC 박막을 합성하기 위해선 합성 장치의 개발과 다양한 실험을 통한 최적의 합성조건 도출 등의 노력이 요구된다. 또한 DLC 박막 합성시의 여러 가지 증착 방법에 따른 박막 물성에 대한 재현성 확보 및 박막 증착에 관한 명확한 메커니즘 규명이 아직까지는 불분명하여 이에 관한 연구가 시급하다. 따라서 본 연구에서는 MEMS 소자와 MMAs의 고체윤활코팅으로 사용가능한 DLC 박막을 RF PECVD (Plasma Enhanced Vapor Deposition) 방식으로 합성하고 후열처리 온도에 따른 DLC 박막의 마찰계수 변화를 박막에 훼손을 주지 않는 FFM (Friction Force Microscopy) 방식을 사용하여 분석하였다.
Kim, Il-Sik;Han, Byeong-Hee;Park, Choon-Su;Yoon, Dong-Jin
Journal of the Korean Society for Nondestructive Testing
/
v.35
no.5
/
pp.332-340
/
2015
Acoustic emission (AE) is an effective nondestructive test that uses transient elastic wave generated by the rapid release of energy within a material to detect any further growth or expansion of existing defects. Over the past decades, because of environmental issues, the use of compressed natural gas (CNG) as an alternative fuel for vehicles is increasing because of environmental issues. For this reason, the importance and necessity of detecting defects on a CNG fuel tank has also come to the fore. The conventional AE method used for source location is highly affected by the wave speed on the structure, and this creates problems in inspecting a composite CNG fuel tank. Because the speed and dispersion characteristics of the wave are different according to direction of structure and laminated layers. In this study, both the conventional AE method and the energy based contour map method were used for source location. This new method based on pre-acquired D/B was used for overcoming the limitation of damage localization in a composite CNG fuel tank specimen which consists of a steel liner cylinder overwrapped by GFRP. From the experimental results, it is observed that the damage localization is determined with a small error at all tested points by using the energy based contour map method, while there were a number of mis-locations or large errors at many tested points by using the conventional AE method. Therefore, the energy based contour map method used in this work is more suitable technology for inspecting composite structures.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.