• 한국항공운항학회:학술대회논문집
• /
• 2016.05a
• /
• pp.14-18
• /
• 2016

본 연구에서는 하이브리드로켓 모터와 고체로켓 모터를 이용하여 목표 고도 1km인 2단 로켓 설계를 수행하였다. 비행 시나리오는 총 비행시간 51.59초, 1단부 로켓 연소시간은 3초이며 연소 종료 후 3초 뒤 단 분리를 수행하여 2단부 로켓 점화가 이루어져 총 3초간 연소가 진행된다. 1단부 모터는 하이브리드로켓으로써 5port의 HDPE를 연료 그레인으로 사용하였고 $LN_2O$를 산화제로 사용하였다. 2단부 모터는 고체로켓으로 KNSB(Sorbitol/$KNO_3$)추진제를 사용하였다. 단 분리는 영전자석을 이용하여 분리하며 2단부 모터의 점화는 광학 센서와 니크롬선 점화방식을 이용하여 점화하도록 설계하였다. 비행하는 동안 AVR를 이용해 압력, 가속도, GPS 등의 자료를 수집할 수 있도록 설계하였다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.05a
• /
• pp.349-352
• /
• 2008

This work is to observe combustion characteristics depending on variation of the solid propellent grain configuration. The LRE (Liquid Rocket Engine) enables adjusting the thrust by controling the required fuel mass glow, but the SRM(Solid Rocket Motor)is not easy to adjust th thrust due to the difficulty of th fuel flow control by its combustion behavior even its configuration is simple. This difficulty can be partly solved by changing th size or the configuration of the propellant grain. In this study a proper grain configuration of a small solid rocket is selected through both the theoretical design and the experimental tests.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.20 no.1
• /
• pp.20-27
• /
• 2016

The prediction of combustion instability is important to avoid an obvious threat to the structural safety and the motor performance because it affects the apparent response function of the propellant, the burning rate, and a mean flow Mach number at the local surface. The combustion instability occurs in case acoustic waves were coupled with the combustion/flow dynamic frequency. In this paper, an acoustic instability model is derived from the nonlinear wave equation for analysing acoustic dynamics in solid rocket motors. The chamber pressure and burning rate effects on combustion instability have been investigated.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.778-780
• /
• 2017

In order to calculate the performance of the solid rocket motor, the internal ballistics analysis code using HLLC scheme has been developed. The result of applying the analysis code to the actual motor shape has been compared with the experimental results and it is confirmed that the performance of the solid rocket motor has been well calculated.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2002.04a
• /
• pp.72-72
• /
• 2002

건국대학교 연소추진 실험실에서 수행할 하이브리드 로켓 모터 연소특성 연구를 위한 실험장치를 설계하고 구성하였다. 실험장치를 제작하기 전에 기본적인 설계요구사항을 바탕으로 모터의 제작을 위한 수치코드를 작성하였다. 연소실 압력과 그레인의 형상, 산화제와 고체연료의 종류를 바탕으로 작성한 수치코드를 사용하여 로켓 모터를 설계하였다. 모터 설계코드를 통하여 세부적인 로켓모터와 노즐의 크기, 특성속도. 연소시간과 공급산화제의 유량 등을 계산하였고, 설계 전에 문헌연구와 이론을 바탕으로 일반적으로 실험실에서 사용되는 하이브리드 로켓 모터에 근접하게 설계를 진행하여 시행착오를 최소화하였다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.15 no.2
• /
• pp.29-35
• /
• 2011

The behaviors of combustion-induced internal flows of SRM equipped with fin-slot grain and submerged nozzle are very complex and diverse. Cold air-flow tests for 2D and 3D scale models of SRM have been done in order to specify the visualization method to analyze particular internal flow patterns such as roll-torque inducing flow. Swirl flow induced by asymmetric vortical tubes also has been visualized through employing various light source and recording directions.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.181-185
• /
• 2010

The behavior of combustion-induced internal flow of SRM equipped with fin-slot grain and submerged nozzle is very complex and diverse. Cold air-flow test for 2D and 3D scale models of SRM has been done in order to specify the visualization method to analyze particular internal flow patterns such as roll-torque inducing flow. Swirl flow induced by asymmetric vortical tube also has been visualized through employing various light source and recording directions.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.04a
• /
• pp.225-227
• /
• 2011

The geometrically sub-scaled wall-injection test model was employed to visualize interactions of internal flow of a solid rocket motor equipped fin/slot grain and submerged nozzle. Symmetric vortex and circumferential flow patterns were visualized.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2012.05a
• /
• pp.225-229
• /
• 2012

대기가 희박한 고고도 환령이나 급격한 선회를 위해 2차분사에 의한 추력벡터제어를 사용한다. 8개의 2차분사구를 갖는 고체로켓모터를 대상으로, 2차분사의 유량을 조절하는 밸브의 개도가 추력, 측추력 및 롤 모멘트에 미치는 영향을 해석적으로 연구하였다. 정상 상태의 3차원 Reynolds Averaged Navier-Stokes 식의 해를 구하였으며, 난류를 위해 Spalart-Almaras 모델을 사용하였다. 수치해석의 타당성을 평가하기 위해 실험 결과와 해석결과를 비교하였다. 밸브의 개도가 증가함에 따라 추력은 감소하나 측추력은 증가한다. 반면, 롤 모멘트의 경우, 밸브와 2차분사 파이프의 상호작용에 의해 개도에 비례하지 않는다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.11a
• /
• pp.419-422
• /
• 2006

Improvement of performance of sorbitol model rocket was studied. The rocket designed in this work was compared with the rocket manufactured previously with respect to the shape of body, grain of rocket motor, motor case and recovery system. From this comparative work, it is found that mass ratio is required to be increased and the rocket was designed under safety regulation.