• Korean Journal of Agricultural and Forest Meteorology
• /
• v.11 no.1
• /
• pp.3-12
• /
• 2009

Ozone tolerance of tree species was determined by standard index of physiological damages and biochemical defense responses under short-term ozone exposure. At the end of 150ppb $O_3$ fumigation, photosynthetic characteristics and antioxidative enzyme activities were analyzed in the leaves of five species(Koelreuteria paniculata, Firmiana simplex, Styrax japonica, Fraxinus rhynchophylla, Viburnum sargentii). Injury index was determined by the effect of ozone on photosynthetic parameters and malondialdehyde(MDA) content, and tolerance index was calculated using the rate of increase in superoxide dismutase(SOD), ascorbate-peroxidase(APX), glutathione reductase(GR) and catalase(CAT) activities. Apparent quantum yield(AQY), carboxylation efficiency(Ce) and photo-respiration rate(PR) decreased in the leaves of five species with increasing ozone exposure time. These parameters were considered as an appropriate indicator for stress evaluation. Antioxidative enzyme activities showed various results depending on the tree species, exposure time, and enzyme types. SOD activity of K. paniculata increased with ozone exposure time, and that of F. rhynchophylla increased only after 6 hours of ozone exposure. CAT activity of $O_3$-exposed F. simplex was lower than the control. Based on standard index, ozone tolerance ability of five species was determined as two tolerant species(F. rhynchophylla > K. paniculata) and three sensitive species(S. japonica > F. simplex > V. sargentii).

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.11
• /
• pp.53-62
• /
• 1994

This paper presents a new approach of analyzing errors resulting from nonideal general-purpose lighting environment when the Photometric Stereo Method (PSM) is applied to estimate the surface-orientation of a three-dimensional object. The approach introduces the explicit modeling of the lighting environment including a circular-disk type irradiance object plane and the direct simulation of the error distribution with the model. The light source is modeled as a point source that has a certain amount of beam angle, and the luminance distribution on the irradiance plane is modeled as a Gaussian function with different deviation values. A simulation algorithm is devised to estimate the light source orientation computing the average luminance intensities obtained from the irradiance object planes positioned in three different orientations. The effect of the nonideal lighting model is directly reflected in such simulation, because of the analogy between the PSM and the proposed algorithm. With an instrumental tool designed to provide arbitrary orientations of the object plane at the origin of the coordinate system, experiment can be performed in a systematic way for the error analysis and compensation. Simulations are performed to find out the error distribution by widely varying the light model and the orientation set of the object plane. The simulation results are compared with those of the experiment performed in the same way as the simulation. It is confirmed from the experiment that a fair amount of errors is due to the erroneous effect of the general-purpose lighting environment.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.4
• /
• pp.821-834
• /
• 2015

This study presents the analysis of flow and bed change characteristics considering bed protection work built on the immediate downstream of weir to protect river bed from scouring. The study area is 37km reach from Hyunpoong station to Masuwon station including Hapcheon- Changryoung multi-function weir in the Nakdong river. CCHE2D model is calibrated and validated for evaluating the flow and bed change characteristics during Typhoon Kompasu in 2010. Three simulation conditions are set up: Case 1 is a natural channel without installation of weir. Case 2 involves an installation of weir in the natural channel. Case 3 involves an installation of weir with bed protection in the natural channel. Flood frequency (50, 100 and 200yr) is applied to each scenario to analyze the effects of bed protection work. While the sediment rate is increased in the downstream of fixed gate and sluice-type gate, river bed scouring rate is increased in the downstream of lift-type gate in Case 2 comparing with the results of Case 1. The river bed scouring is not occurred in the immediate downstream of weir (~30m) due to the effect of bed protection, but larger amount of sediment is occurred in the downstream of weir (60m~) which the bed protection is not installed comparing with the results Case 1. Through the results of simulation considering bed protection work, this study would be helpful to expect bed change and operate the weir as well as manage.

• Applied Chemistry for Engineering
• /
• v.7 no.5
• /
• pp.925-937
• /
• 1996

Three types of mordenites treated by steaming($SM_{6.5}$), HF solution for $SM_{6.5}(FM_a)$ and HF solutlon+steaming for $SM_{6.5}(FM_b)$ were prepared and used as cracking catalysts of vacuum gas oil. These samples were analysed by XRF and XPS for average and surface Si/Al atomic ratio, XRD for unit cell constants, nitrogen adsorption/desorption for porosity, pyridine-IR for acidic properties. In comparison with three type samples, $SM_{6.5}$ had a lot of acid amount and showed micropore volume mostly(>85% to total volume). Dealuminated $FM_a$, compared with $SM_{6.5}$, was decreased a little in acid amount and improved for porosity. Also, $FM_b$ was decreased further in acid amount and developed in mesopore dramatically. The catalytic activity and the yield of gasoline, kerosine+diesel and branched aromatic over the modified mordenites which have developed mesopore were improved. This is due to limited access of diffusion of large molecules within pore of the modified mordenites.

• Clinics in Shoulder and Elbow
• /
• v.11 no.2
• /
• pp.137-142
• /
• 2008

Purpose: To evaluate the clinical and radiographic results of the treatment of a proximal humerus fracture with a locking compression plate(LCP). Materials and Methods: This study reviewed the results of 24 cases of a proximal humerus fracture treated with a LCP from January 2005 to April 2007, after a follow up of more than 12 months. There were 8 males and 16 females with a mean age of 68.9(33-90) years. The clinical results were evaluated using the Neer's evaluation criteria, and the radiographic results were evaluated using the bone union time and Paavoleinen method. Results: The mean time for bone union was 11.9 weeks. Using the Neer's functional evaluation, 21 cases of the 24 patients (87%) showed excellent or satisfactory results. Twenty two cases (91%) showed good results according to the Paavoleinen method. The complications encountered were metal failure (1 patient), AVN of the humeral head (1 patient) and joint stiffness (1 patient). Conclusion: The LCP demonstrated good results in the treatment of a proximal humerus fracture and has relatively fewer complications than other internal fixators.

• Clinics in Shoulder and Elbow
• /
• v.11 no.2
• /
• pp.158-164
• /
• 2008

Purpose: We compared the results of arthroscopic Bankart repair using metal and biodegradable anchor fixation. Materials & Methods: We reviewed 26 patients with anterior shoulder instability treated by arthroscopic Bankart repair from October, 2006, to March, 2007, 15 patients with metal anchors and 11 patients with biodegradable anchors. The average age was 27.4 years old (range: 17~55) and mean follow-up was 14 months (range: 12~17 months). Functional outcome was evaluated using the Korean Shoulder Score for Instability (KSSI), Rowe's Bankart Grading scale (RBGS), ASES score, and UCLA scores. Results: In the metal-anchor group, the improvements of mean KSSI, ASES, UCLA score, and RBGS were 20.6, 24.0, 4.0, and 45.5, respectively. In the biodegradable anchor group, improvements of mean KSSI, ASES, UCLA score, and RBGS were 21.0, 23.6, 4.6, and 48.9. The improvements in final outcomes were not significantly different (p>.05). One metal problem and one traumatic redislocation occurred in the metal group. Conclusion: Both techniques produced satisfactory outcomes in the treatment of traumatic anterior instability. The biodegradable anchor group could also avoid problems with metal anchors.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1007-1011
• /
• 2006

본 연구에서는 어류 생태계 유지를 위해 필요한 생태학적 추천유량을 산정하고, 어류의 서식처 환경인 여울과 웅덩이의 형성조건을 검토함으로써 '작용'인 '흐름'과 '응답'인 '하상구조'와의 상관 관계를 규명하고자 하였다. 본 연구의 대상하천인 금호강에서는 하상변동이 활발한 자연 상태를 벗어나 하상의 이동성 상당히 둔화된 상태이며, 저수로내 여울과 웅덩이도 대표어종이 서식할 수 있는 자갈하상 구조에 변화가 일어나고 있는 것으로 분석되었다. 이것은 금호강 상류에 영천댐 건설의 영향이 어느 정도 미치고 있음을 유황분석 결과를 통해 간접적으로 파악할 수 있었다. 댐과 같은 수공구조물의 건설로 인하여 하도가 고정화된 상태에서 장기간에 걸치게 되면 여울과 웅덩이와 같은 하상구조가 축소되거나 소멸되어 금호강에서의 대표어종 서식처 환경에 영향을 미칠 것으로 추정된다. 금번 연구결과, 금호강에서 어류의 생식에 필요한 생태학적 추천유량 $8.2m^3/sec$가 필요하였으며, 어류의 서식처 환경인 여울과 웅덩이를 지속적으로 유지되기 위해서는 $250m^3/sec$ 이상의 유량이 연간 한번 이상 흘러야 하고, 2.5년 내지 3년 마다 약 $500m^3/sec$ 정도의 유량이 흐를 필요가 있다고 분석되었다. 본 연구 대상지점에서 흐름과 하상구조를 하천생태계와 연계해서 볼 때, 생태추천유량은 어디까지나 대표어종이 서식할 수 있는 최소조건에 불과하다. 대표어종이 장기간에 걸쳐 서식할 수 있는 하상구조가 존재하기 위해서는 대표어종이 선호하는 여울과 웅덩이가 필요하다. 결국 대표어종이 서식하기 위한 필요충분조건은 생태추천유량 확보와 아울러 대표어종이 선호하는 하상구조를 유지하기 위해서는 하도의 이동성을 유발할 유황변화가 필요하다는 것이 입증되었다.대상으로 연중 발생하는 큰 호우사상에 대해 임의의 강우관측소를 결측지점으로 가정하고 주변의 강우관측소로부터 각각의 방법을 이용해 가중치들을 산정하여 결측지점의 강우량 값을 보정하고자 하였다. 또한 각각의 방법을 이용하여 얻어진 결과에 대해 실측값과 보정값의 오차정도를 평균절대오차법(Mean Absolute Error)과 제곱평균제곱근오차법(Root Mean Squared Error)에 의해 산정하여 보정 방법간의 효율성을 검토하고자 하였다.9년, 그리고 2010년${\sim}$2019년까지 총 4구간으로 나누어 결과를 도출하였으며 예상한 바와 같이 후반기 20년 동안에 세 가지 지표가 취약해 지는 것을 확인할 수 있었고, 특히 2000년부터 2009년까지 10년 동안에는 더욱 취약해짐을 확인할 수 있었다.를 보임에 따라 그 정책적 효과는 때로 역기능적인 결과로 초래하였다. 그럼에도 불구하고 이 연구결과를 통하여 최소한 주식시장(株式市場)에서 위탁증거금제도는 그 제도적 의의가 여전히 있다는 사실이 확인되었다. 또한 우리나라 주식시장에서 통상 과열투기 행위가 빈번히 일어나 주식시장을 교란시킴으로써 건전한 투자풍토조성에 저해된다는 저간의 우려가 매우 커왔으나 표본 기간동안에 대하여 실증분석을 한 결과 주식시장 전체적으로 볼 때 주가변동율(株價變動率), 특히 초과주가변동율(超過株價變動率)에 미치는 영향이 그다지 심각한 정도는 아니었으며 오히려 우리나라의 주식시장은 미국시장에 비해 주가가 비교적 안정적인 수준을 유지해 왔다고 볼 수 있다.36.4%)와 외식을 선호(29.1%)${\lrcorner}$ 하기 때문에 패스트푸드를 이용하게 된 것으로 응답 하였으며, 남 여 대학생간에는 유의한 차이(p<0.05)가 인정되었다. 응답자의 체형은 ${\ulco

• The Journal of the Korean bone and joint tumor society
• /
• v.15 no.2
• /
• pp.93-103
• /
• 2009

Purpose: We evaluated the outcomes of surgical reconstructions using recycled autograft augmented with VFG for bone defects caused by tumor resections. Materials and Methods: Ten patients with a malignant or locally aggressive bone tumor who were managed with recycled autograft augmented with VFG and followed up minimum 1 year were evaluated for bone union, functional result and complications. The influence of various factors on bone union and functional outcomes were also analyzed. Results: Bone unions were obtained at 13 of 20 junctions. Average union time was 3.7 months at metaphyseal junctions and 8 months at diaphyseal junctions (P<0.05). At diaphyseal junctions, younger aged group and intramedullary location group showed earlier bone union (P<0.05). The mean functional score was 81%. There were 3 nonunions, 4 delayed unions and 2 recycled bone resorption combined with fractures. Conclusion: To obtain excellent results, proper microvascular technique, sufficient length of VFG bridging both junctions, stable internal fixation and protection of reconstructed bone until union are necessary.

• Journal of Chest Surgery
• /
• v.33 no.11
• /
• pp.886-893
• /
• 2000

배경: 흉복부 대동맥류는 질환 자체가 광범위하고 수술 중 척수를 포함한 각종 장기의 보호 및 허혈 방지라는 면에서 아직도 수술 합병증이 높은 질환이다. 본 연구에서는 그 동안의 임상경험을 바탕으로 치료성적, 합병증 발생, 사망률 등을 검토하였다. 대상 및 방법: 1990년 1월부터 1999년 12월까지 흉복부동맥류로 수술을 시행한 38명의 환자를 대상으로 의무 기록 검토을 통한 후향적 분석을 시행하였다. 결과: 남자가 22명, 여자가 16명, 평륜 연령은 46.2$\pm$12.3세였고, 크로포드 진단분류 상 1형 이 13례(34.2%), 2형이 19례(50%), 3형이 4례(11%), 4형이 2례(4.8%)였다. 만성 대동맥박리증에 관련된 경우가 29례(76.3%)로 가장 많았고, Marfan 증후군이 동반된 경우가 9례(23.7%)에서 있었다. 원위부 대동맥 관류를 35례에서 시행하였으며, 고동맥-고정맥 심폐바이패스를 31례에서, 좌심방-고동맥 바이패스를 4례에서 시행하였다. 심폐바이패스를 이용한 31례중 4례에서 초저체온하 완전순환정지를 이용하였다. 대동맥 차단 중 복강내 주요 대동맥 분지로의 선택적 관류를 시행하였다. 대동맥류의 최대직경은 평균 8.2$\pm$2.4cm이었고, 동맥류가 파열된 경우는 11례(28.9%)에서 있었다. 전례에서 인조혈관을 이용한 대동맥의 치환술을 시행하였다. 단계적으로 흉복부 대동맥을 겸자하면서 인공혈관을 문합하였고, Adamkiewicz 동맥으로 생각되는 부위의 늑간 동맥을 문합해주었는데, 8번째부터 12번째 흉추 사이의 늑간 동맥 중 역류혈류가 나타나고 상대적으로 내경이 큰 것들을 문합해 주었다. 술 후 조기사망은 3례에서 있었으며, 사인은 심폐기 이탈 실패 (2례), 저혈압 및 산증(1례) 등이었다. 조기 합병증으로는 애성 5례, 출혈 5례, 창상간염 3례, 장기간의 인공호흡기보조가 3례 등이 있었다. 치명적인 조기 합병증인 하지마비는 2례(5.3%)에서 발생하였고, 이 중 1례는 대동맥의 심한 석회화로 늑간동맥을 문합해 주지 못했던 경우였다. 35명의 환자에서 평균 추적기간은 103.1$\pm$6.1 개월, 2년 생존율은 93.8%, 5년 생존율은 86.1%, 8년 생존율은 80.7%였다. 추척기간 동안 4례의 만기사망이 관찰되었고, 사인은 2례에서는 갑작스런 의식소실이 발생하여 규명하기 어려웠으며, 대동맥-식도루 발생에 의한 경우가 1례, 경동맥류 파열에 의한 경우가 1례 등이었다. 만기 합병증으로는 복부 대동맥류(2례), 상행 대동맥 및 대동맥 근부 확장(1례), 대동맥-늑막루(1례), 창상 부위 탈장(1례), 역행성 사정(1례) 등이 있었다. 결론: 저자들은 흉복부대동맥류의 수술에 있어 심폐우 회술 혹은 좌심방-고동맥 바이패스를 통한 원위부 관류 및 저체온법, 수술 시 척수의 혈류공급과 관련된 늑간동맥의 연결 등으로 주요 신경합병증의 발생을 줄이고 좋은 성적을 거두고 있다고 판단하였으며 향후 임상 경험 축적과 함께 보다 정련된 위험인자의 분석이 필요하다고 본다.

• Journal of the Korea Concrete Institute
• /
• v.26 no.4
• /
• pp.545-553
• /
• 2014

This study suggested an integrated classification method for generalized characteristics of PC beam-column connection according to connection details. Quantifying the failure mode of PC-beam column connection and characteristics of corresponding details, this study suggested to use deformation contribution of each element of beam-column assemblage. According to the expected failure mode of beam-column connection assemblage, PC beam-column connection can be classified into 'equivalent monolithic system' and 'jointed system'. In this study, four test specimens were tested for verification of detailed classification method of PC beam-column connections. Test was carried out with typical beam-column connection test method. Load was applied at the top of test specimen and end of beams were restrained by hinge. In order to verify the deformation contribution of each test specimen, 34-LVDTs were mounted on test specimen. According to test results, deformation contribution of each test specimen have different characteristics. Deformation characteristics of joint and other components which are quantified by test results, equivalent monolithic system can be classified into two categories. Strong connection have extremely small deformation contribution of joint and much larger deformation contribution was shown in flexural behavior of beam. The other type of beam-column connection is ductile connection which allows the larger deformation in joint area compared with strong connection.