• Journal of Korea Foresty Energy
• /
• v.25 no.2
• /
• pp.42-48
• /
• 2006

This study looked into the change of tree growth of five forest growth monitoring plots which were set up at the Undulyeong Hongchungun Kangwondo, and was accomplished to provide the basic data for the forest management calculating carbon storage and absorption in the Undulyeong area. Annual height and DBH growth were slowly progressed in the Pinus koraiensis, Larix kaempferi, and Pinus densiflora stand which were at young stage, but the growth rates of the other stands were lower than those young stands. The diameter class of the mixed forest and Quercus mongolica and Betala platyphylla stand was predicted to be similar as it is and those of Pinus koraiensis and Larix kaempferi stands were predicted to move to the upper diameter classes because of rapid growth rates of the those stands. As in the year 2005, total carbon storage of the Undulyeong model forest was increased by 155,000 TC(2.7%) compared with the previous year. During 2005, total carbon which was absorbed and stored according to growth of the forest was 166,174 TC and net carbon absorption (155,481 TC) increased by 2,736 TC (1.8%) compared with the previous year. Resultingly, the Undulyeong model forest is acting as a net sink and the net carbon absorption rate is slightly increasing recently.

• Clean Technology
• /
• v.23 no.1
• /
• pp.80-89
• /
• 2017

The bubbling fluidized bed (BFB) reactor with a diameter of 0.1 m and a height of 1.2 m was used for experimental study of co-firing and emission characteristics fueled by sewage sludge (SS) and wood pellet (WP). The facility consists of a fluidized bed reactor, feeding system, cyclone, condenser and gas analyzer, The mean particle diameter and minimum fluidization velocity are $460{\mu}m$ and $0.21ms^{-1}$ respectively. SS produced from Korea and WP from Canada were examined. The various mixing ratios of WP were 20, 50, and 80% based on HHV. The equivalence ratio of 1.65, reactor temperature of $800^{\circ}C$, air flow rate of $100Lmin^{-1}$, and fluidization number of 4 were fixed in the BFB experiment. In TGA, the range of combustion temperature of SS was wider than that of WP. It represents that the combustibility of WP is higher than that of SS. The BFB reactor temperature was maintained between 800 and $900^{\circ}C$. CO emission of SS was high because of lower combustibility. $NO_X$ and $SO_X$ formation of SS were higher than that of WP since high nitrogen and sulfur contents of SS. CO, $NO_X$, and $SO_X$ formation were suppressed as the mixing ratio of WP was increased. The slagging and fouling tendencies show high in all test conditions.

• Journal of Korean Society of Forest Science
• /
• v.101 no.2
• /
• pp.297-304
• /
• 2012

The objective of this study was to estimate the changes of stand structure before and after applying the three different silvicultural treatments such as selection cutting system, two-storied system, and shelterwood system. This study has been conducted in the natural deciduous forests in Pyungchang of Gangwon Province, Korea. Three permanent sampling plots of 0.09 ha were established in the forests and the three silvicultural treatments were applied in 2008. For this study, some tree variables were measured in each stand before and after the silvicultural treatments were applied. With these data, stand attributes were estimated in each stand before and after the silvicultural treatments. In this study, four stand structure indices were used to analyze the differences among structures of stands managed by three different silvicultural treatments. Contagion index, DBH-difference index, height-difference index, and mingling index were estimated and compared to analyze the differences of stand structures among the stands before and after silvicultural treatments. Duncan's multiple range test and t-test were then employed to statistically analyze the difference of stand structure among the stands. The results revealed that all of the stand structure indices seem to be increased after applying the silvicultural treatments. There are significant differences in the stand structure indices between before and after silvicultural treatments for each stand. According to the evaluation of stand structure indices, it was confirmed that spatial structure of the stands was improved by applying the silvicultural treatments. For attaining the specific goal of each stand types acquired by different silvicultural treatments, the frequencies and amounts of additional practices should be decided based on the changes of stand structure as time passed.

• Journal of The Korean Association For Science Education
• /
• v.34 no.8
• /
• pp.795-806
• /
• 2014

The purpose of this study is to develop an intervention program for improvement of elementary science-poor students' Basic Science Process Skill (BSPS) and to validate the intervention program's effectiveness using eye-tracker. The participants of this study were 35 elementary science-poor students. This study's method was the analysis of real-time eye movements during basic science process skill problem solving. SMI's 120 Hz iView XTM RED was used to collect EMD (eye movement data). Experiment 3.4 and BeGaze 3.4 programs were used to design experiment and to analyze EMD. The results of this study are as follows. First, we developed an intervention program including BSPS instructional strategy, behavior of teachers & student according instructional strategy stage, teachinglearning plan and learning note. Second, science poor students' BSPS ability has improved statistically significantly through the application of intervention program and BSPS problem-solving time decreased statistically significantly. Third, AFT (average fixation time) of BSPS Question and keyword area decreased statistically significantly. Fourth, APD (average pupil diameter) of BSPS problem-solving process expanded statistically significantly. Fifth, AST (average saccade time) of BSPS problem-solving process increased statistically significantly. Sixth, AFET (average fixation entry time) of BSPS problem-clue area was accelerated statistically significantly, AFT of BSPS problem-clue area reduced statistically significantly.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.11
• /
• pp.18-24
• /
• 2000

(Ba,Sr)$TiO_3$ thin films have attracted great interest as new dielectric materials of capacitors for ultra-large-scale integrated dynamic random access memories (ULSI-DRAMs) such as 1 Gbit or 4 Gbit. In this study, inductively coupled $BCl_3/Cl_2/Ar$ plasmas was used to etch (Ba,Sr)$TiO_3$ thin films. RF power/dc bias voltage=600 W/-250 V and chamber pressure was 10 mTorr. The $Cl_2/(Cl_2+Ar)$ was fixed at 0.2 the (Ba,Sr)$TiO_3$ thin films were etched adding $BCl_3$. The highest (Ba,Sr)$TiO_3$ etch rate is $480{\AA}/min$ at 10 % $BCl_3$ to $Cl_2/Ar$. The change of Cl, B radical density measured by optical emission spectroscopy(OES) as a function of $BCl_3$ percentage in $Cl_2/Ar$. The highest Cl radical density was shown at the addition of 10% $BCl_3$ to $Cl_2/Ar$. To study on the surface reaction of (Ba, Sr)$TiO_3$ thin films was investigated by XPS analysis. Ion bombardment etching is necessary to break Ba-O bond and to remove $BaCl_2$. There is a little chemical reaction between Sr and Cl, but Sr is removed by physical sputtering. There is a chemical reaction between Ti and Cl, and $TiCl_4$ is removed with ease. The cross-sectional of (Ba,Sr)$TiO_3$ thin film was investigated by scanning electron microscopy (SEM), the etch slope is about 65~70$^{\circ}$.

• Korean Journal of Remote Sensing
• /
• v.36 no.2_2
• /
• pp.337-349
• /
• 2020

In this study, Helikite, Low Altitude Remote Sensing (LARS) platform, was used to acquire coastal images. In the obtained image, the land and water masses were divided using four types of region clustering algorithms, and then waterline was extracted using edge detection. Quantitative comparisons were not possible due to the lack of in-situ waterline data. But, based on the image of the infrared band where water masses and land are relatively clear, the waterlines extracted by each algorithm were compared. As a result, it was found that each algorithm differed significantly in the part where the distinction between water masses and land was ambiguous. This is considered to be a difference in the process of selecting the threshold value of the digital number that each algorithm uses to distinguish the regions. The extraction of waterlines through various algorithms is expected to be used in conjunction with a Low Altitude Remote Sensing system that can be continuously monitored in the future to explain the rapid changes in coastal shape through several years of long-term data from fixed areas.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.10
• /
• pp.117-124
• /
• 2017

A Smart Grid is a system that can efficiently use energy by exchanging real-time information in both directions between a consumer and a power supplier using ICT technology on an existing power network. DR(Demand response) is an arrangement in which electricity users can sell the electricity they save to the electricity market when the price of electricity is high or the power system is crisis. In this study, we developed a power meter data transmission device and power IT system that measure the demand information in real-time using a smart meter and transmit it to a cloud server. The power meter data transmission device developed in this study uses alight sensor connected to a Raspberry Pi 3 to measure the number of blinking lamps on the KEPCO meter per unit of power, in order to provide reliable data without any measurement errors with respect to the KEPCO power data. The power measurement data transmission device uses the standard communication protocol, OpenADR 2.0b. The measured data is transmitted to the power IT system, which consists of the VEN, VTN, and calculation program, via the LTE WiFi communication network and stored in its MySQL DB. The developed power measurement data transmission device issues a power supply instruction and performs a peak reduction DR when a power system crisis occurs. The developed power meter data transmission device has the advantage of allowing the user to adjust it every 1 minute, where as the existing smart metering time is fixed at once every 15 minutes.

• Journal of the Korean Vacuum Society
• /
• v.17 no.1
• /
• pp.28-33
• /
• 2008

Lanthanum modified lead zirconate titanate ($Pb_{1.1}La_{0.08}Zr_{0.65}Ti_{0.35}O_3$) thin films were fabricated on indium doped tin oxide (ITO)-coated glass substrate by R.F magnetron sputtering method. The thin films were deposited at $500^{\circ}C$ and post-annealed with various temperature ($550-750^{\circ}C$) by rapid thermal annealing technique. The structure and morphology of the films were characterized with X-ray diffraction (XRD) and atomic force microscopy (AFM) respectively. The hysteresis loops and fatigue properties of thin films were measured by precision material analyzer. As the annealing temperature was increased, the remnant polarization value was increased from $10.6{\mu}C/cm^2$ to $31.4{\mu}C/cm^2$, and coercive field was reduced from 79.9 kV/cm to 60.9 kV/cm. As a result of polarization endurance analysis, the remnant polarization of PLZT thin films annealed at $700^{\circ}C$ was decreased 15% after $10^9$ switching cycles using 1MHz square wave form at ${\pm}5V$.

• Korean Chemical Engineering Research
• /
• v.44 no.1
• /
• pp.40-45
• /
• 2006

The baculovirus-insect Drosophila melanogaster S2 cell system combines advantages of conventional baculovirus system and non-lytic S2 cell system because baculoviruses can infect non-permissive cells such as mammalian and Drosophila S2 cells but cannot replicate themselves inside the cells. In the present work, we investigated effects of infection conditions on production of green fluorescent protein (GFP) as a target protein using this baculovirus-S2 cell system. Even though higher MOI and longer baculovirus contact time showed better GFP expression yield during the shorter period, overall protein yield could be lower during the longer period due to the relatively higher cell detachment and lysis (lower cell viability). In addition, maintaining high MOI will be not practical for large-scale cell culture. Therefore, instead of maintaining high MOI, we found that high initial cell number and concentrated (10X) baculovirus volume can confer comparable protein expression even under the moderate MOI condition. Also, we found that the post-infection time that is connected to state of cells after infection was an important factor for production yield.

• Journal of the Korean Vacuum Society
• /
• v.11 no.2
• /
• pp.113-118
• /
• 2002

We developed engineering methods to control gas flow in a plasma reactor in order to achieve good etch depth uniformity for large area GaAs etching. Finite difference numerical method was found quite useful for simulation of gas flow distribution in the reactor for dry etching of GaAs. The experimental results in $BCl_3/N_2/SF_6/He$ ICP plasmas confirmed that the simulated data fitted very well with real data. It is noticed that a focus ring could help improve both gas flow and etch uniformity for 150 mm diameter GaAs plasma etch processing. The simulation results showed that optimization of clamp configuration could decrease gas flow uniformity as low as $\pm$ 1.5% on an 100 mm(4 inch) GaAs wafer and $\pm$ 3% for a 150 m(6 inch) wafer with the fixed reactor and electrode, respectively. Comparison between simulated gas flow uniformity and real etch depth distribution data concluded that control of gas flow distribution in the chamber would be significantly important in order or achieve excellent dry etch uniformity of large area GaAs wafers.