• Journal of IKEEE
• /
• v.22 no.4
• /
• pp.941-947
• /
• 2018

In general, capacitors have a large influence on the life of the system due to frequent charging and discharging. In this paper, we analyze the cause of the core failure of high voltage, high current HVDC sub-module film capacitor and analyze the precautions of the capacitor design and manufacturing process. First, the cause of the fault, the failure mode, and the effect are analyzed through the FMEA of the capacitor. To quantitatively evaluate the causes and effects of faults that have the greatest effect on the failure of a capacitor, a fault tree for the capacitor is presented and the failure rate is analyzed according to the design parameters and the driving conditions. It is verified that the main cause of capacitor failure is the capacitance change, and it is necessary to minimize the temperature rise, corona occurrence, electrode expansion, and insulation distance decrease during capacitor design and manufacturing process in order to reduce the failure rate of the capacitor.

• Journal of the Korean Society for Railway
• /
• v.20 no.4
• /
• pp.458-465
• /
• 2017

The railway signaling system, which controls the course of trains and the distance between trains, is a safety critical system of the railway system because derailment or collision of trains can occur if unsafe failure is generated by any fault. The international standards of reliability, availability, maintainability, and safety of railway applications require that the safety of functions be guaranteed in safety critical systems; system reliability and safety are quantitatively estimated and demonstrated by the failure rates of devices. The development of technology has accelerated the development of railway signaling systems. Existing devices, which have already been verified as to their safety, are applied with special user requirements to reflect the new operation scenario. It is found that the reliability and safety of the devices are different depending on individual application. Therefore, the reliability of the railway signaling system must be considered while complying with the international standards; this requires that the initial failure rate be estimated and demonstrated using fault data gathered over several years. This paper shows a method for demonstrating the initial estimated failure rate and suggests a fault data collection method and an overall process that is based on probability.

• Journal of the Korean Society for Railway
• /
• v.10 no.5
• /
• pp.527-532
• /
• 2007

In this paper, we suggest those two design plans for power supply method of Hot Standby Sparing System; one is the plan using MTBF based on Constant Failure Rate, and the plan using Reliability Function is the other. Traditionally, RBD (Reliability Block Diagram) is used for reliability prediction which is required to meet any requirements before system operation. However, the system that has redundancy, such as Hot Standby Sparing System, Is not suitable for system reliability modeling using combination model, such as RBD. In this paper, therefore, we demonstrate that for redundancy controller, redundancy modeling design toward fault occurrence design is more effective to build up a system with higher reliability and achieve the effectiveness of loss cost due to maintenance and failure occurred in operation, rather than combinational modeling design.

• Convergence Security Journal
• /
• v.6 no.3
• /
• pp.145-153
• /
• 2006

Infinite failure NHPP models for a record value satisfies mode proposed in the literature exhibit either monotonic increasing or monotonic decreasing failure occurrence rates per fault. In this paper, propose comparative study of software reliability model using Erlang distribution, Rayleigh and Gumbel distribution. Equations to estimate the parameters using maximum likelihood estimation of infinite failure NHPP model based on failure data collected in the form of interfailure times are developed. For the sake of proposing distribution, we used to the special pattern. Analysis of failure data set using arithmetic and Laplace trend tests, goodness-of-fit test, bias tests is presented.

• Journal of Digital Convergence
• /
• v.12 no.12
• /
• pp.277-284
• /
• 2014

The NHPP software reliability models for failure analysis can have, in the literature, exhibit either constant, monotonic increasing or monotonic decreasing failure occurrence rates per fault. In this paper, finite failure NHPP models that assuming the expected value of the defect and infinite failures NHPP models that repairing software failure point in time reflects the situation, were presented for comparing property. Commonly used in the field of software reliability based on Rayleigh distribution software reliability model finite failures and infinite failures were presented for comparison problem. As a result, infinite fault model is effectively finite fault models, respectively. The parameters estimation using maximum likelihood estimation was conducted. In this research, can be able to help software developers for considering software failure property some extent.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1485-1486
• /
• 2015

경제성장과 인구증가에 따른 전력수요의 증가는 특고압 배전계통선로 건설의 필요성을 증대시키고 있으며, 환경 개선을 원하는 고객의 요구에 따라 배전계통의 지중화율은 향후 지속적으로 증가할 것으로 보인다. 80년대에 시설된 지중배전케이블은 20년간의 장기 사용으로 인하여 열화에 의한 고장이 증가하고 있는 상태이다. 그러나 사용환경이 양호한 곳의 케이블은 여전히 정상 성능을 보이는 경우도 많이 있다. 따라서 사용기간에 따라 일괄적으로 케이블 교체하는 것은 경제적이지 못하며, 사용 기간에 따라 교체하더라도 초기에 고장률이 높은 경우가 있기 때문에 케이블의 교체만으로 고장을 방지하는 효과가 최대로 나타나기는 어렵다. 따라서 열화가 많이 진행되어 고장 발생 확률이 높은 케이블을 선별하여 교체하는 것이 고장확률을 줄이고 경제적이다.

• Annual Conference of KIPS
• /
• 2005.11a
• /
• pp.361-364
• /
• 2005

본 논문에서는 순서 통계량을 이용한 유한 고장 NHPP 모형들이 제안되었다. 이 모형들은 결함당 고장발생률이 단조 증가하거나 단조 감소하는 패턴을 가진다. 그리고 수명 분포에서는 기존의 모형들과 비교하고 kappa(2) 분포를 이용한 소프트웨어 신뢰성 모형을 제안하여 이 모형의 특성과 효율성에 대하여 제시하였다. 고장 간격 시간 자료를 이용한 무한고장 NHPP 모형들에 대한 모수 추정은 최우 추정법을 사용하였고 적용 분포들의 적용을 용이하게 하기 위하여 특수한 형태를 제시하였다. 실제고장 자료를 이용한 자료분석에서는 편차자승합을 이용한 모형 선택과 적합도 및 치우침 검정을 실시하여 그 결과를 나열 하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.7
• /
• pp.1541-1548
• /
• 2012

This paper proposes a new multipath-based routing protocol on MANETs with Fast-Recovery of failures. The proposed protocol establishes the primary and secondary paths between a source and a destination considering the end-to-end packet reception reliability of routes. The primary path is used to transmit messages, and the secondary path is used to recover the path when detecting failures on the primary path. If a node detects a link failure during message transmission, it can recover the path locally by switching from the primary to the secondary path. By allowing the intermediate nodes to recover locally the route failure, the proposed protocol can reduce the number of packet loss and the amount of control packets for setting up new paths. The simulation result using QualNet simulator shows that the proposed protocol was about 10-20% higher than other protocols in terms of end-to-end message delivery ratio and the fault recovery time in case of link fault was about 3 times faster than the other protocols.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.9 no.4
• /
• pp.351-358
• /
• 2016

Science and technology is developing rapidly as more powerful software with the rapid development of software testing and reliability assessment by the difficulty increases with the complexity of the software features of the larger increases NHPP software reliability models for failure analysis can have, in the literature, exhibit either constant, monotonic increasing or monotonic decreasing failure occurrence rates per fault. In this paper, finite failure NHPP models that assuming the expected value of the defect and infinite failures NHPP models that repairing software failure point in time reflects the situation, were presented for comparing property. Commonly used in the field of software reliability based on Erlang distribution software reliability model finite failures and infinite failures were presented for performance comparative evaluation problem. As a result, finite failure model is better than infinite failure model effectively. The parameters estimation using maximum likelihood estimation in the course of this study was conducted. As the results of this research, software developers to identify software failure property be able to help is concluded.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.8 no.3
• /
• pp.195-202
• /
• 2015

NHPP software reliability models for failure analysis can have, in the literature, exhibit either constant, monotonic increasing or monotonic decreasing failure occurrence rates per fault. In this paper, finite failure NHPP models that assuming the expected value of the defect and infinite failures NHPP models that repairing software failure point in time reflects the situation, were presented for comparing property. Commonly used in the field of software reliability based on exponential power distribution software reliability model finite failures and infinite failures were presented for comparison problem. As a result, finite fault model is effectively infinite fault models, respectively. The parameters estimation using maximum likelihood estimation was conducted. In this research, software developers to identify software failure property some extent be able to help is considered.