• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.156-157
• /
• 2012

최근 국내에서도 다양한 형태의 전력반도체 모듈이 개발되고 있으며 대용량화에 따라 전력반도체 패키지 내부에 소자의 병렬연결이 흔히 사용되고 있다. 이에 따라 회로의 구조에 따른 기생 임피던스, 즉, 인덕턴스와 저항 성분은 개별 소자의 안전영역(SOA)을 넘는 스트레스를 발생시키고 고장을 일으킬 수 있다. 이러한 기생 임피던스를 모듈 설계 단계에서 시뮬레이션을 통해 분석하여 이에 의한 영향을 예측하고 설계에 반영하여 고 신뢰성 차량용 전력반도체 모듈을 개발하고자 한다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.11a
• /
• pp.347-348
• /
• 2022

자율운항선박 도입에 관한 논의가 국제해사기구에서 본격적으로 시작됨에 따라 자율운항선박 관련 기술개발이 세계적으로 활발하게 진행되고 있다. 그러나, 통신, 보안, 고장진단, 유지보수 등의 기술개발이 아직 미흡하여, 자율운항선박의 상용화까지는 많은 시간이 소요될 것으로 예상된다. 이러한 기술들은 문제가 발생할 경우 선박에 막대한 피해를 발생시킬 수 있으며, 특히, 연안을 항해하는 선박보다는 대양을 항해하는 선박에 더 치명적이기 때문이다. 본 연구에서는 대양항해 시 자율운항선박에 발생할 수 있는 문제들을 극복하기 위한 방안으로 여러 척의 선박을 하나의 그룹으로 묶어 항해하는 그룹항법시스템을 제안한다. 하나의 그룹은 한 척의 유인선박인 리더선박과 여러 척의 무인선박인 추종선박으로 구성되어 있으며, 항해하는 동안 일직선 형태를 유지한다. 리더선박은 출발지에서 목적지까지 미리 설정된 변침점을 따라 항해하며, 추종선박은 리더선박의 경로를 추종하여 항해한다. 선박의 침로를 제어하기 위한 타각 제어기는 선박에서 주로 사용되는 PD 제어기를 구현하여 사용하였다. 그룹항법시스템을 검증하기 위해 선박해양플랜트연구소에서 공개한 KVLCC2의 축소 모형인 L-7 모델을 사용하여 시뮬레이션을 진행하였다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2023.11a
• /
• pp.304-305
• /
• 2023

드론 비행 후 추출할 수 있는 Log 파일은 드론의 비행 정보를 확인할 수 있는 데이터이다. 이 데이터를 Log 분석기를 사용하여 그래프 형태로 시각화 하게 되면 비행 속도, 거리, 높이 등 다양한 비행데이터를 분석하기에 용이하다. 또한 Log 분석 자료에는 기체운용 중 발생하는 안전 이슈에 대한 기록도 포함되어 있어 드론의 사고 또는 고장유무를 판단할 때에 중요한 자료로서 활용된다. 그러므로 데이터분석 시에 안전 이슈 발생 시점과 연관지어 데이터를 분석하는 것이 보다 효과적이다. 그러나 상용 서비스에서는 분석데이터와 안전 이슈 데이터를 함께 보는 방법은 제공되지 않는다. 따라서 본 논문에서는 기존의 Log 분석 시스템에 안전 이슈 정보를 추가하여 볼 수 있는 방법을 제시하여 드론 운용자가 로그분석을 보다 효과적으로 할 수 있는 방법을 제안하고자 한다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2008.05a
• /
• pp.675-678
• /
• 2008

최근 반도체 장비는 충분한 네트워크 성능과 유지 관리 기능을 자체적으로 내장하고 있으며, 자동화 네트워크 구성을 위한 통신규약 및 메시지로 SECS-I, SECS--II, HSMS와 PLC장비의 OPC등이 있다. 하지만 각 통신규약 및 메시지 형태가 상이하여 통합 관리 및 모니터링이 어려운 실정에 있다. 따라서 본 논문에서는 반도체 산업장비의 다양한 통신규약중 사용도가 높은 SECS-II와 OPC에서 메시지를 추출하고 통합된 메시지를 작성하기 위한 방법 및 소프트웨어 구조를 제시한다. 이러한 시스템을 통해서 생산 효율 및 가동률을 높이고, 고장 진단/장애요소 제거 등 산업 현장에서 발생할 수 있는 문제점을 개선 할 수 있는 기반 기술을 마련한다.

• Journal of Korean Society of Steel Construction
• /
• v.24 no.5
• /
• pp.491-501
• /
• 2012

Generally, a steel pier-foundation has been designed and constructed with a anchor frame. However, because of the complicated design and construction, the foundation's size has become large and has been overdesigned. In this study, three specimens were made and the tests were conducted to suggest a new shape in regard to the pier-foundation's joint details using the high performance steel. One of the specimens was made up of the general anchors and the anchor frame. Another specimen consisted of the high tension anchors and the studs, and the other specimen was composed of the high tension anchors and the inner steels. After the performance of each specimen was compared and analyzed, the behavior characteristics according to the joint were analyzed.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.12
• /
• pp.61-70
• /
• 2007

The density of Memory has been increased by great challenge for memory technology. Therefore, elements of memory become more smaller than before and the sensitivity to faults increases. As a result of these changes, memory testing becomes more complex. In addition, as the number of storage elements per chip increases, the test cost becomes more remarkable as the cost per transistor drops. Recent development in system-on-chip (SOC) technology makes it possible to incorporate large embedded memories into a chip. However, it also complicates the test process, since usually the embedded memories cannot be controlled from the external environment. Proposed design doesn't need controls from outside environment, because it integrates into memory. In general, there are a variety of memory modules in SOC, and it is not possible to test all of them with a single algorithm. Thus, the proposed scheme supports the various memory testing process. Moreover, it is able to At-Speed test in a memory module. consequently, the proposed is more efficient in terms of test cost and test data to be applied.

• Journal of the Korea Society for Simulation
• /
• v.28 no.4
• /
• pp.1-10
• /
• 2019

The Sea Water Reverse Osmosis (SWRO) plant should take into account the availability of the plant from the design stage for long-term and continuous fresh water production. As it occurs, it is necessary to establish a corrective maintenance plan and preventive maintenance plan to maintain availability. In the field of complex engineering structures such as seawater desalination plants, it is difficult to estimate the reliability or availability of the system in a mathematical way. This study develops RAM analysis framework and model, and proposes discrete event simulation model as a application sowtware specialized for seawater desalination plant. Considering the characteristics of the plant maintenance, in case of corrective maintenance, we propose a preventive maintenance policy that not only repairs or replaces a single-broken part, but also simultaneously maintains all accessible parts according to the level of overhaul. A case study was conducted to estimate the availability of the system based on the field data of the seawater desalination plant in Korea and Saudi Arabia. The result was close to the expected availability of the plant.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.9
• /
• pp.46-53
• /
• 2007

The link-fault recovery in the normal Ethernet bridged networks has relied on the Spanning Tree Protocol(STP) or Rapid STP. However, STP can not offer fast error recovery which is needed real-time services such as aircraft. In this paper, we compare automatic protection switching(APS) providing fault-tolerant function in the BcN back bone system with Avionic Full Duplex Switched Ethernet(AFDX) which is recently equipped in the A380 for Airbone Databuses. Also, we propose a link-bypass scheme for improving fault-tolerant performance of the AFDX by connecting switches and bypass fault section when a fault is originated on the link. For comparing and verifying the performance of proposed scheme, we simulated Ethernet, AFDX, APS and proposed AFDX with link-bypass scheme using NS-2. The proposed AFDX with link-bypass scheme can be applied to aircrafts, BcN backbone networks and industrial automatic networks.

• Journal of KSNVE
• /
• v.6 no.3
• /
• pp.341-347
• /
• 1996

Vibration analysis is one of the most powerful tools available for the detection and isolation of incipient faults in mechanical systems. The methods of vibration analysis in use today and under continuous study are broad band vibration monitoring, time domain analysis, and frequency domain analysis. In recent years, great interest has been generated concerning the use of time- frequency repesentation and its application for a machinery diagnostics and condition monitoring system. The objective of the study described in this paper was to develop a new diagnostic tool for the rotating machinery. This paper introduces a new time frequency representation. Directional Winger-Ville Distribution, which analyese the time-frequency structure of the rotating machinery vibration.

• Journal of the Korea Safety Management & Science
• /
• v.15 no.1
• /
• pp.11-19
• /
• 2013

In modern systems design and development, one of the key issues is considered to be related with how to reflect faithfully the stakeholder requirements including customer requirements therein, thereby successfully implementing the system functions derived from the requirements. On the other hand, the issue of safety management is also becoming greatly important these days, particularly in the operational phase of the systems under development. An approach to safety management can be based on the use of the failure mode effect and analysis (FMEA), which has been a core method adopted in automotive industry to reduce the potential failure. The fact that a successful development of cars needs to consider both the complexity and failure throughout the whole life cycle calls for the necessity of applying the systems engineering (SE) process. To meet such a need, in this paper a method of FMEA is developed based on the SE concept. To do so, a process model is derived first in order to identify the required activities that must be satisfied in automotive design while reducing the possibility of failure. Specifically, the stakeholder requirements were analyzed first to derive a set of functions, which subsequentially leads to the task of identifying necessary HW/SW components. Then the derived functions were allocated to appropriate HW/SW components. During this design process, the traceability between the functions and HW/SW components were generated. The traceability can play a key role when FMEA is performed to predict the potential failure that can be described with the routes from the components through the linked functions. As a case study, the developed process model has been applied in a project carried out in practice. The results turned out to demonstrate the usefulness of the approach.