• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.6
• /
• pp.180-186
• /
• 2009

Due to the large capacity and low cost, electrolytic capacitors with of energy storage and voltage regulation are used for almost all types of non-linear load as the DC/DC converter. Electrolytic capacitor, which is the most of the time affected by the aging effect, plays very important role for the power converter system quality and reliability. Therefore, this paper proposes a new method to detect the changes the capacitance value of an electrolytic capacitor in order to analyze the internal characteristic and worn-out state of an electrolytic capacitor. Simulation results by frequency analysis show the validity of the proposed capacitance estimation algorithm.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.151-151
• /
• 2008

바이폴러 트랜지스터(이하 BJT)의 고온 콜렉터-베이스 역전압 수명시험을 실시하였고, 수영시험 전후의 특성평가를 통해 BJT의 고장모드를 분석하였다. 시험조건은 주위온도 $150^{\circ}C$에서 콜렉터-베이스 정격 역전압의 80%를 인가한 상태에서 실시하였으며, 시료수는 57개이고 최종 목표 시험시간은 2,000시간이다. 중간측정을 통해 BJT의 특성열화를 관찰하였으며, 1,500시간 경과 후 1개 시료에서 제품규격을 벗어나는 데이터가 측정되었다. 해당 시료를 분석한 결과 콜렉터-베이스 누설전류 및 전류이득($\beta$)이 증가하였고, 저주파에서의 junction capacitance 가 정상품 대비 크게 관찰되었다. 측정결과를 통해 누설전류 증가 및 이득이 증가한 원인을 추정하였다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.04b
• /
• pp.394-396
• /
• 2004

원자력 산업계에서는 원전 MMIS(Man-Machine Interface System)의 디지털 기술 적용을 위해 많은 노력을 기울이고 있고, 특히 원자력 산업의 특수성인 안전성 확보에 필요한 개발기준과 규제방법 정립에 많은 연구가 수행되고 있다. 또한 디지털 MMIS의 핵심기반기술인 고 신뢰도 소프트웨어 개발 방법론이 확립되지 못하여 소프트웨어 공통모드고장 문제, 정량적인 소프트웨어 신뢰도 보장 문제 등이 현안으로 제기되고 있다. 이와 같이 원전 MMIS의 디지털화를 성공하기 위해서는 소프트웨어의 고 신뢰도 확보가 관건이며, 고 신뢰도를 확보하기 위한 소프트웨어 개발 방법론의 정립이 절실히 요구되고 있다. 본 논문에서는 원전 소프트웨어 개발에 적응되는 규제지침을 분석하고, 일체형원자로(SMART, System-integrated Modular Advanced ReacTor) MMIS 소프트웨어 개발에 적응될 소프트웨어 개발 방법론을 제시한다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.2
• /
• pp.329-335
• /
• 2019

Reliability growth analysis was conducted for a guided weapons system. In the development phase, reliability management activities were continuously carried out by identifying failure modes and causes and analyzing faults found during the testing. The missile system consists of an all-up-round missile and a launcher, and the analysis was carried out according to the test results of each system. The test results for the all-up-round missile were obtained with discrete data, which were success and failure as a one-shot-device. The test results for the launcher were obtained with continuous data by operating the equipment continuously in the test. For each test result, the reliability growth model was applied to the Standard Gompertz model and the Crow-Extended model. The models were used to identify the growth analysis results of the test so far. It was also possible to predict the reliability growth results by assuming the future test results. The study results could be useful in achieving the desired reliability goal and in determining the number of tests. Then, the planned test will be confirmed and the growth analysis of the missile system will continuously be conducted.

• Journal of the Microelectronics and Packaging Society
• /
• v.23 no.2
• /
• pp.37-42
• /
• 2016

While datacenter operation cost increases with electricity price rise, many researchers study low-power processor based supercomputers to reduce power consumption of datacenters. Reliability of low-power processors for supercomputers can be of concern since the reliability of many low-power processors are assessed based on mobile use conditions. This paper assessed the reliability of low-power processor packages based on supercomputer use conditions. Temperature cycling was determined as a critical failure cause of low-power processor packages through literature surveys and failure mode, effect and criticality analysis. The package temperature was measured at multiple processor load conditions to examine the relationship between processor load and package temperature. A physics-of-failure reliability model associated with temperature cycling predicted the expected lifetime of low-power processors to be less than 3 years. Recommendations to improve the lifetime of low-power processors were presented based on the experimental results.

• Resources Recycling
• /
• v.25 no.4
• /
• pp.11-22
• /
• 2016

In global automobile industry, the remanufacturing for used products has the merit to be reduced nearly 80 percent of energy consumption and resources of new product. The objective of this paper is the analysis of detailed remanufacturing processes about research object and failure modes of each process of throttle body which is one of automobile parts, to draw a FMEA and determine the degree of seriousness (S), detection (D) and occurrence (O) of many failures. And we compared the current RPN method of being used to calculate values of RPN with three suggested methods. : Summation method, Square root method, Volume method.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.25 no.6
• /
• pp.509-523
• /
• 2023

The high-level nuclear waste (HLW) repository is exposed to complex environmental conditions consisting of high temperature, high humidity, and radiation, resulting in structural deterioration. Therefore, structural health monitoring is essential, and piezo sensors are used to detect cracks and estimate strength. However, since the monitoring sensors installed in the disposal tunnel and disposal container cannot be replaced or removed, the quantitative life of the monitoring sensor and its suitability must be assessed. In this study, the life of a piezo sensor for monitoring was assessed using an accelerated life test (ALT). The failure mode and mechanism of the piezo sensor under high temperature conditions were determined, and temperature stress's influence on the piezo sensor's life was analyzed. ALT was conducted on temperature stress and the relationship between temperature stress and piezo sensor life was suggested. The life of the piezo sensor was assessed using the Weibull probability distribution and the Arrhenius acceleration model. The suggested relationship can be used in multiple stress ALT designs for more precise life assessment.

• Journal of IKEEE
• /
• v.24 no.1
• /
• pp.354-359
• /
• 2020

DGA(Dissolved Gas Analysis) is regularly performed to detect internal defects of power transformers and prevent failures. The overheating or discharging in the transformer can be confirmed by DGA but the defective parts should be identified by internal inspection. However, winding or iron core defects cannot be checked by internal inspection, so it is impossible to establish actions by DGA alone. In this paper, the internal defect mode is analyzed and presented based on the transformer internal inspection reports, and the internal defect can be predicted by considering DGA.

• 기계와재료
• /
• v.23 no.3
• /
• pp.190-198
• /
• 2011

하이브리드 굴삭기는 에너지 재생 및 연비향상을 위하여 기존의 유압부품들 중 일부를 전기부품으로 대체하여 시스템을 구성하고 있다. 따라서, 하이브리드 굴삭기의 신뢰성을 평가하고 보장하기 위해서는 기계적인 부하와 전기적인 부하가 복합적으로 영향을 미쳐 발생되는 고장모드를 고려하여 신뢰성평가기법을 개발하여야 한다. 특히 하이브리드 굴삭기는 가혹한 실외 환경조건에서 운용되므로 새롭게 개발되는 부품들에 대하여 설계 결함을 조기에 발견하기 위한 복합 내환경 시험과 초가속 수명시험이 수행되어야만 한다. 본 연구에서는 FMEA, FMECA, FTA 및 HALT 등의 다양한 신뢰성 기법을 사용하여 하이브리드 굴삭기의 신뢰성평가기법을 개발하였고, 개발대상 하이브리드 굴삭기의 주요 동력전달 파트인 선회구동 시스템에 대한 신뢰성평가장비를 개발하고 구축하였다. 본 연구에서 개발된 하이브리드 굴삭기 신뢰성평가기법은 하이브리드 자동차의 부품들에 대한 신뢰성평가에도 유용하게 사용될 수 있을 것으로 기대된다.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1848-1853
• /
• 2007

In this study, we are to analyze the life and the main failure mode of pneumatic valves that are usually applied to the factory automation line. Pneumatic valves have complicated failure cause since they are organized as a complex of various elements. Therefore, in this paper, we analyzed the main failure mode of pneumatic valves, and then performed life test and performance test according to the international standards. On the basis of these processes, we estimated a shape parameter that is the main factor for the calculation of test time for the reliability of pneumatic valves by analyzing life distribution data.