• The Transactions of the Korean Institute of Power Electronics
• /
• v.16 no.5
• /
• pp.457-465
• /
• 2011

The fault analysis and detecting algorithm for a 3 phase diode rectifier is proposed. The 3 phase dioderectifier is used for the AC power rectifier of the PWM inverter. The input power or diode faults cause theripples of the DC voltage, degradation of the control performance and life shortening of the DC link capacitor.In this paper, the ripple of the DC voltage is mathematically analyzed for the earth fault of input power andopen circuit fault of the diode, respectively. The fault detection and type of fault can be obtained by comparingthe average DC voltage and the instant DC voltage which is sampled with 6 times of grid frequency. Theproposed method can be easily applicable and doesn't require additional circuit. The experimental and simulationresults are presented to verify the validity of the proposed method.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1556-1557
• /
• 2011

변압기의 고체 절연이 열화 되거나 불순물 및 수분이 혼입되어 임계치 이상의 고전계가 인가되면 결합부분에서 부분방전이 발생한다. 현재 변압기에서 부분방전을 검출하기 위해서는 부싱탭을 이용하거나 전류센서, 초음파센서 등을 이용하여 부분방전을 검출하고 있지만 전기적인 부싱탭이나 전류센서를 이용한 검출 방법은 주변 잡음의 영향을 많이 받고 초음파법은 감도가 낮다는 단점을 가지고 있다. 이에, UHF 방식을 이용한 부분방전 검출 기술이 전력기기의 초기 고장진단을 발견하는 효과적인 방법으로 인식되고 있다. 최근에는 이러한 UHF 진단방식의 높은 감도, 외부노이즈에 대한 적은 영향, 온라인 측정의 가능성의 장점으로 전력용 변압기에도 적용되고 있다. 본 논문에서는 전력 변압기에서 PD 진단에 적합한 UHF 센서의 개발에 대해서 소개한다. 제안된 UHF 센서는 광대역(500 ~ 1,500MHz)에서 측정이 가능하며 감도가 우수하며 특정 대역에서 공진점을 가지는 다중 공진 모노폴 안테나 타입이다. 안테나 시뮬레이션 및 해석을 통해 유중 부분방전을 모의하여 감도 측정을 실시한 결과 제안된 UHF 센서가 전력용 변압기의 부분방전 측정에서 높은 감도를 나타냈으며, 기존 측정 방식의 단점을 보완할 수 있는 방안으로서 전자파를 이용한 부분방전 측정에 대한 기초연구를 실시하여 변압기 운전중에 전자파 측정에 의한 부분방전 감시가 가능한 것으로 나타났다.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.13 no.8
• /
• pp.787-795
• /
• 2001

An experimentation on the on-line fault detection and diagnosis(FDD) system has been performed with HVAC system in he experimental building constructed inside the large scale environmental chamber. Personal computer with a home-made FDD program by pattern recognition method utilizing artificial neural network was connected on-line via Ether-net TCP/IP to the supervisory control server for HVAC system. The FDD program monitored the HVAC system by 1 minuted interval. The results showed that he FDD program detected the sudden or abrupt faults such s those in fans, sensors and heater, etc.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.71-75
• /
• 1991

This paper deals with designing a real-time fault and accommodation system. The LQG controller is adopted in the normal state and the output of LQG controller is corrected using Separated Bias Estimator in the faulty state. The proposed scheme has been applied to the two-tank control system and showed satisfactory performance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.11
• /
• pp.1279-1289
• /
• 1992

Fault-tolerant system in improved the reliability and safety by using hardware and software redundancy. Fault mask and detection, identification techniques are conditionally used with system's application areas. Here DMR system is operated with standby and fail-safe module method that has minimal hardware and software redundancy, then its reliablity and safety comparison is presented respectively. Also this paper proposed an effective methods of dealing with transient faults as compared system's MTTFs to transient faults tolerance capabilities of self-diagnosis program.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.8 no.3
• /
• pp.571-578
• /
• 2018

The deteriorated pipline often causes the unexpected leakage and crack. Negligence and late maintenance leads the enormous damage for gas and water resource. This paper proposes early fault detection and diagnosis algorithm for pipeline using acoustic emission (AE) signals. Early fault detection method for pipeline compares the frequency amplitude of the spectrum to that of the spectrum in normal condition. Larger amplitude of the spectrum indicates abnormal condition. Early fault diagnosis algorithm uses support vector machines (SVM), which is trained for normal and abnormal conditions to diagnose the measured AE signal from the target pipeline. In the experiment, a pipeline testbed is constructed similarly to real industrial pipeline. Normal, 5mm cracked, 10mm holed pipelines are installed and tested in this study. The proposed fault detection and diagnosis technique is validated as an efficient approach to detect early faulty condition of pipeline.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.4 s.346
• /
• pp.49-55
• /
• 2006

In this paper, a fault dictionary for fault locations is considered. The foremost problem in fault diagnosis is the size of the data. As circuits are large, the data for fault diagnosis increase to the point where they are impossible to be stored. The increased information makes it impossible to store the dictionary into storage media. In order to generate the dictionary, j.e. pass-fail dictionary some dictionaries store a portion of the information. The deleted data makes it difficult to diagnose fault models except single stuck-at fault. This paper proposes a new dictionary format. A new format makes a dictionary small size without deleting any informations.

• Journal of Korea Multimedia Society
• /
• v.10 no.10
• /
• pp.1260-1270
• /
• 2007

Testing and diagnosis of analog circuits(or mixed-signal circuits) continue to be a hard task for test engineers and efficient test methodologies to solve these problems are needed. This paper proposes a novel analog circuits test technique using time slot specification (TSS) based built-in current sensors (BICS). A technique for location of a fault site and separation of fault type based on TSS is also presented. The proposed built-in current sensors and TSS technique has high testability, fault coverage and a capability to diagnose catastrophic faults and parametric faults in analog circuits. In order to reduce time complexity of test point insertion procedure, external output and power nodes are used for test points and the current sensors are implemented in the automatic test equipment(ATE). The digital output of BICS can be easily combined with built-in digital test modules for analog IC test.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.14 no.7
• /
• pp.878-882
• /
• 2004

In this paper, we propose a hierarchical hybrid neural network for detecting faults of induction motor. Implementing the classifier based on the input and output data, we apply appropriate transform and classification method at each step. In the proposed method, after obtaining the current of state of motor for each period, we transform it by Principle Component Analysis(PCA) to reduce its dimension. Before the training process, we use the conditional Fuzzy C-means(FCM) for obtaining the initial parameters of neural network for more effective learning procedure. From the various simulations, we find that the proposed method shows better performance to detect and diagnosis of induction motor and compare than other methods.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.16 no.10
• /
• pp.932-941
• /
• 2004

The objective of this study is to detect the multi-fault of HVAC system using a new pattern classification technique. To classify the effect of single-fault in determining the pattern, supply air temperature, OA-damper, supply fan, and air flowrate were chosen as experimental parameters. The combination of supply temperature, flow rate, supply fan and OA-damper were chosen as multi-fault conditions. Three kinds of patterns were introduced in the analysis of multi-fault problem. To solve multi-fault problem, the new pattern classification technique using residual ratio analysis was introduced to detect the multi-fault as well as single-fault. The residual ratio could diagnose single-fault or multi-fault into several patterns.