• Journal of the Earthquake Engineering Society of Korea
• /
• v.5 no.2
• /
• pp.125-138
• /
• 2001

고유진동수와 감쇠비는 지진이나 바람과 같은 동적 횡하중에 대해 구조물의 응답을 결정하는 주요한 특성이다. 본 연구는 지진하중에 대하여 목표응답 수준을 만족하는 구조물의 고유진동수와 감쇠비를 지정하고, 이 값을 실현하는 점탄성 감쇠기 파라미터의 처적분포를 구하는 설계방법을 제안한다. 여기서 지정할 고유진동수와 감쇠비는 목표응답 수준을 만족하는 여러 조합 중 설계조건과 원래 건물의 특성에 따라 결정될 수 있다. 제안한 설계방법은 점탄성 감쇠기의 감성 파라미터를 고유값의 기울기 정보를 바탕으로 분포시키므로 최적 위치와 크기에 대한 정보를 동시에 제공한다. 예제로서 평면 10층 전단 건물을 대상으로 최적설계를 수행하여 지정된 고유값을 실현하는 파라미터의 최적분포를 구하고 이를 통해 제안한 최적 설계의 특성을 확인하였다. 또한 더 나아가 3차원 일방향 비대칭 전단전물에 제안된 최적설계를 수행하여 그에 대한 적용가능성을 확인하였다.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.6
• /
• pp.176-182
• /
• 1999

In this paper, we consider a decoupling control and a servo control for the JINAMCHA of which the cart and the pointer is coupled very strongly. The right eigenstructure assignment(i.e. simultaneous assignment of eigenvalues and right eigenvectors) is used for decoupling the motions of the cart and the pointer. The CGT(Command Generator Tracker) is used for a servo control of the JINAMCHA. The performance of the proposed control scheme, that is the combination of the right eigenstructure assignment and the CGT, is evaluated by simulations. The results show that the proposed controller has better performance than the LQR with limiting properties and the conventional LQ servo.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.2
• /
• pp.206-213
• /
• 2001

An overlapping decentralized robust EA(eigenstructure assignment) controller is designed for an active suspension system of a vehicle based on a full car model with 7-degree of freedom. Using overlapping decomposition, the full car model is decentralized by two half car models. For each half car model, an effective and disturbance suppressible controller can be obtained by assigning appropriately a left eigenstructure of the system. The performance of the proposed overlapping decentralized robust EA controller is compared with that of a conventional centralized EA controller through computer simulations.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.11
• /
• pp.108-120
• /
• 1998

In this paper, a new control system design algorithm, which has the advantages of the existing LQR and eigenstrcture assignment methods, is proposed. The method of the transformation matrix via block controller is utilized to develop the scheme. Using the proposed algorithm, LQR weighting matrices q and R, which satisfy the desired closed-loop eigenvalues and eigenvectors, can be achieved using only simple matrix computations. The usefulness of the proposed scheme is verified by applying to a numerical example and an automotive active suspension control system design.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.11
• /
• pp.81-88
• /
• 1999

A conventional quarter-car suspension system is a single input system with one actuator. Thus, the performance enhancement for ride quality could be limited. In this paper, we propose a novel automotive suspension system for a quarter-car with two independent actuators to improve the control performance. The left eigenstructure assignment method for multi-variable systems has been applied to the proposed novel quarter-car model.

• Computational Structural Engineering
• /
• v.6 no.1
• /
• pp.17-25
• /
• 1993

여기에서는 진동기초에 관한 해석모델로 실무에서 널리 사용되고 있는 참고문헌[1]의 진동기초 해석모델에 관한 문제점들(로킹진동, 보와 기둥의 연결부에 관한 모형화, 기계 질량의 위치지정, 작용하중의 형태)을 알아보았고, 이 문제점들을 개선한 해석모델들을 소개하였다. 참고문헌[1]의 진동기초 해석모델(모델A)과 개선된 해석모델들간의 해석결과로부터 기존의 해석모델 A는 실제보다 훨씬 긴 고유진동주기를 가져오기 때문에 진동기초에 대한 해석모델로서 부적합함을 알 수 있었다. 여기에서 소개한 해석모델중 모델 D를 이용하면 실제에 매우 가까운 진동기초의 고유진동주기와 모드형상을 얻을 수 있을 것으로 생각되며 기계회전 속도의 변화에 의한 진동기초 고유진동수와의 공진현상에 대한 세심한 검토가 필요하다.

• 제어로봇시스템학회:학술대회논문집
• /
• 1986.10a
• /
• pp.86-89
• /
• 1986

This paper presents a design methodology for a PID regulator. The parameters of the PID regulator are determined through equivalent structure to the closed-loop system whose feedback gain assigns prescribed eigenvalues of the closed-loop system and minimizes a given performance index.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.11
• /
• pp.1621-1628
• /
• 2004

This paper proposes a design methodology for the robust observer using the eigenstructure assignment in multi-output systems so that the observer is less sensitive to the ill-conditioning factors such as unknown initial estimation error, modeling error and measurement bias in transient and steady-state observer performance. The robustness of the observer can be achieved by selecting the desired eigenvector matrix to have a small condition number that guarantees the small upper bound of the estimation error. So the left singular vectors of the unitary matrix spanned by space of the achievable eigenvectors are selected as a desired eigenvectors. Also, this paper proposes how to select the desired eigenvector based on the measure of observability and designs the observer with small gain. An example of a spindle drive system is simulated to validate the robustness to the ill-conditioning factors in the observer performance.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.513-517
• /
• 1995

In this paper, a relation of matrix Q in cost function to distances between the closed-loop and open-loop poles of a multi input controllable systems is studied. Futhmore, the state feedback gain with exact desired eigenvalues in the LQR is computed. The proposed scheme is applied to designing automotive active suspension control system for a half-car model and its performance is compared with the existing LQR control system design methodology.

• Journal of Institute of Control, Robotics and Systems
• /
• v.4 no.6
• /
• pp.695-702
• /
• 1998

In this paper, we propose a novel fault isolation filter design method using the left eigenstructure assignment scheme proposed by Choi et. al., The proposed filter shows good fault isolation performance with exact eigenstructure assignment. An eigenstructure assignment methodology which satisfies the required fault isolation conditions is also proposed. The proposed method guarantees that the corrupted m simultaneous faults can be isolated when the number of available output measurements are (m+1).