• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.6 no.4
• /
• pp.283-296
• /
• 2008

The numerical simulations for groundwater flow were carried out to support the input parameters for safety assessment in LILW repository site. As the input parameters for safety assessment, the groundwater flux into the underground facilities during construction, flow rate through the disposal silo after closure of disposal silo and flow pathway from the disposal silo to discharge area were analyzed using the 10 cases groundwater flow simulations. From the total 10 numerical simulation results, the statistics of estimated output were similar to among 10 cases. In some cases, the analyzed input parameters were strongly governed by locally existed high permeable fracture zone at radioactive waste disposed depth. Indeed, numerical simulation for well scenario as a human intrusion scenario was carried out using the hydraulically severe case model. Using the results of well scenario, the input parameters for safety assessment were also obtained through the numerical simulation.

• Journal of Engineering Education Research
• /
• v.12 no.2
• /
• pp.51-62
• /
• 2009

The purpose of the study was to analyze job satisfaction and organizational commitment of organizational members for accreditation of engineering education. That will allow applying for effective and efficiency job system in workplace. To this aim, this study analyzed 62 organizational members for accreditation of engineering education how they perceived job satisfaction and organizational commitment in their workplace. The main results of the study are follows. First, organizational members' general job satisfaction is very low. Especially satisfaction of job security, wages, promotion and reward is very low. Second, organizational commitment of organizational members is low. Especially continuance commitment is higher in comparison with affective commitment and normative commitment. It means that their retailing potential is huge if they have a chance. Finally, influencing factors of job satisfaction and organizational commitment are job security, wages, promotion and reward. In conclusion, this study suggests effective organizational system for enhancing job satisfaction and organizational commitment of organizational members for accreditation of engineering education.

• The Journal of the Korea Contents Association
• /
• v.20 no.1
• /
• pp.304-316
• /
• 2020

Laos is rich in natural resources but lacks the capital to develop them. Partly alleviating the shortage is FDI from neighboring countries, especially Thailand. Not only does this contribute to directly increasing GDP by increasing effective demand, it also has an additional GDP increase effect by expanding Laos' production capacity. Laos' exports mostly consist of mineral resources and electricity. This, too, contributes to an increase in GDP by increasing the effective demand. Thailand accounts for more than 40 percent of Laos' exports. This paper tries to confirm the economic impact on Laos in Thailand through a econometric analysis of Laos' GDP, Laos' exports to Thailand and Thailand's FDI to Laos. It turns out that economic ties with Thailand, including exports to Thailand and Thailand's FDI, play a very important role in Laos' economic growth. Laos recently recorded relatively robust economic growth, but its driving force is weak. That's because Laos' growth engines are very limited and have no resilience to external shocks. Moreover, economic growth has not been linked to an increase in employment because the economy is not diversified and growth in the hydroelectric power sector does not lead to growth in other sectors. Given this, Laos needs to actively take advantage of its geographical proximity to Thailand. It is necessary to create a more active environment for the inflow of FDI in Thailand, to foster resource-based and labor-based manufacturing to take advantage of the Thai market.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.110-110
• /
• 2016

금속재료 중 철강은 기계적 성질이 우수하고 대량생산에 의한 뛰어난 경제성을 가지기 때문에 다양한 산업 분야에서 널리 사용되고 있다. 그러나 스테인리스강 등과 같은 일부 특수한 용도의 강을 제외하고는 부식 환경에 취약하기 때문에 그 용도에 따라 표면처리를 함으로서 내식특성을 부여하고 있다. 일반적으로 이러한 철강재료에 대한 부식문제를 해결하기 위한 방법으로는 습식프로세스 중 아연(Zn)도금이 사용되는데, 아연은 그 자체가 보유하고 있는 차폐(barrier)효과는 물론 상대적으로 이온화 경향이 크기 때문에 철에 대하여 전자를 공급하는 희생양극적(Sacrificial anode)역할을 하여 철을 방식하는 원리를 가지고 있다. 하지만 최근에 이르러 기존의 도금 프로세스 처리된 제품의 사용 및 적용분야가 확대되고 가혹해 짐에 따라서 내식성 향상을 위한 새로운 재료 및 신기술 개발이 요구되고 있는 실정이다. 본 연구에서는 친환경 프로세스 방법인 PVD법 중 하나인 스퍼터링(Sputtering)을 이용하여 0.8mm 두께의 냉연강판 (cold rolled steel) 상에 Al에 대한 Mg 함량을 10~30wt.%로 하여 약 $5{\mu}m$ 두께의 막을 제작하였다. 이때 20wt.% 막의 경우 공정압력조건을 증가시켜 증착 막의 결정배향성을 변화시켰다. 뿐만 아니라 제작된 막들에 대해서 $400^{\circ}C$온도에서 10분간 열처리함으로서 코팅막의 성분변화에 따른 영향을 살펴보기 위해 시편을 추가 제작하였다. 이와 같이 제작된 막들에 대한 형성메커니즘과 내식성의 상관관계 해명을 위해 막의 조성분포, 표면 및 단면의 모폴로지 관찰 및 결정구조 등 재료특성분석과 더불어 염수분무(Salt spray test), 침지시험 그리고 양극분극 시험 등을 통해 내식성 평가를 진행하였다. 이상의 종합적인 결과를 살펴보면 제작된 Al-Mg 막은 마그네슘 함량비 및 열처리 조건에 따라 조성분포와 막의 모폴로지 및 결정배향성이 변화한다는 것을 알 수 있었는데, 마그네슘 함량이 증가하고 열처리한 막의 내식성이 가장 양호한 것으로 나타났다. 이것은 Al-Mg 성분이 표면을 중심으로 균일 분산-분포하며, Al에 대한 Mg의 고용으로 인해 안정적으로 형성된 부식생성물과 금속화합물의 단계적 반응 효과에 의해 차폐효과와 희생양극적 특성이 동시에 향상되었기 때문으로 생각된다. 한편 공정 압력을 증가시켜 형성한 막은 결정학적 구조에서 보다 높은 표면 에너지와 증가한 격자 정수에 의해 Mg이 부식환경에서 빠르게 반응하여 안정적 피막을 형성하기 때문에 내식성이 향상된 것으로 보여 진다. 이상의 연구를 통해서 고내식성을 Al-Mg막의 유효성 확인하였으며, 설계에 대한 기초적인 응용지침을 제시할 수 있을 것으로 사료된다.

• Korean Journal of Social Welfare
• /
• v.52
• /
• pp.5-32
• /
• 2003

This paper examines the labor entry of conditional welfare recipients. This paper focuses on two questions. First, what is the percentage of conditional welfare recipients who have labor entry? Second, what are the predictors in the labor entry and the duration to the entry? Using Data about 917 welfare recipients who participated in the self-sufficiency programs of the Offices for Secure Employment in Seoul, this paper attempts to answer the above questions. Logistic regression analysis and survival analysis are adopted to identify variables predicting labor entry of conditional welfare recipients. This paper also utilizes a multiple imputation method to deal with the limitation of data by the missing values in some variables. The major findings are as follows: about 43.8% of the conditional welfare recipients have successful labor entry; and in the labor entry and the duration to the entry, gender, household, information and referral services for employment, health and willingness for self-sufficiency are the predictors that are statistically significant. Among these variables, health and willingness for self-sufficiency are more noticeable; it is recognized that programs to care for health of welfare recipients who want to have the labor entry and counseling programs to strengthen welfare recipients' willingness for labor entry are very important for them to be successful in the labor entry. This paper provides a basic knowledge about realities of the conditional welfare recipients' labor entry, identifies research areas for further research, and develops policy implications for their self-sufficiency.

• Journal of the Korean Geotechnical Society
• /
• v.15 no.2
• /
• pp.105-127
• /
• 1999

Application of the soil nailing method is continuously extended in maintaining stable excavations and slopes. Occasionally, however, ground anchor support system may not be used because of space limitations in urban excavation sites nearby the existing structures. In this case, soil nailing system with relatively short length of nails could be efficiently adopted as an alternative method. The general soil nailing support system, however, may result in excessive deformations particularly in an excavation zone of the existing weak subsoils. Pretensioning the soil nails then, could play important roles in reducing deformations mainly in an upper part of the nailed-soil excavation system as well as improving local stability. In the present study, the analytical procedure and design technique are proposed to evaluate maximum pretension force and stability of the pretensioned soil nailing system. Also proposed are techniques to determine the required thickness of a shotcrete facing and to estimate probability of a failure against the punching shear. The predicted results are compared with the limited measurements obtained from the excavation site constructed by using the pretensioned soil nails. Based on the proposed procedure and technique, effects of the radius of a influence circle and dilatancy angle on the thickness of a shotcrete facing, bonded length and safety factors are analyzed. In addition, effects of the reduction of deformations expected by pretensioning of the soil nails are examined in detail throughout an illustrative example and FLAC$^{2D}$ program analysis.s.

• Journal of the Korean Geotechnical Society
• /
• v.29 no.5
• /
• pp.53-64
• /
• 2013

Resistivity monitoring is based on the fact that a change in the porosity leads to the changes in water content and fine particles, which alter the electrical resistivity. At every embankment dam, internal erosion always occurs as time passes. The internal erosion generally develops into piping over a long time by backward erosion and concentrated leak, and finally leads to dam failure. Resistivity is known to be very sensitive to the changes in porosity in embankment dams. Thus resistivity monitoring is a reasonable method to find out the leakage zone. However, resistivity is strongly influenced by seasonal variation of temperature, TDS of reservoir water and water level. In this paper. we first installed electrodes permanently at the center of the crest. The electrical resistivity monitoring data was acquired every 6 hours from Apr. 3, 2011 to July. 31, 2012. To analyze the characteristics of monitoring data, each resistivity data was calculated from up to 2,950 data sets. The result indicated a seasonal resistivity variation due to related temperature. Finally, a quantitative method to estimate porosities of the embankment dam from the resistivity monitoring data was analyzed. The applicability and reliability were verified and the importance of electrical resistivity monitoring for obtaining reliable result was emphasized.

• Resources Recycling
• /
• v.24 no.6
• /
• pp.9-16
• /
• 2015

In a recycling scheme of spent lithium ion batteries, a co-precipitation process for the re-synthesis of precursor is essential after the leaching of lithium ion battery scraps. In this study, the effect of ammonia as impurity during the co-precipitation process was investigated in order to re-synthesize a precursor of Ni-rich cathode active material $LiNi_{0.6}Co_{0.2}Mn_{0.2}O_2$ (NCM 622). As ammonia concentration increases from 1 M (the optimum condition for synthesis of the precursors based on 2 M of metal salt solution) to 4 M, the composition of obtained precursors deviates from the designed composition, most notably for Ni. The Ni co-precipitation efficiency gradually decreases from 100% to 87% when the concentration of ammonia solution increases from 1 M to 4 M. Meanwhile, the morphological properties of the obtained precursors such as sphericity, homogeneity and size distribution of particles were also investigated.

• Journal of the Microelectronics and Packaging Society
• /
• v.24 no.2
• /
• pp.11-15
• /
• 2017

As the heat dissipation problem is increased in 3D multi flip chip packages, an improvement of thermal conductivity in bonding interfaces is required. In this study, the effect of alumina filler addition was investigated in non-conductive paste(NCP). The fine alumina filler having average particles size of 400 nm for the fine pitch interconnection was used. As the alumina filler content was increased from 0 to 60 wt%, the thermal conductivity of the cured product was increased up to 0.654 W/mK at 60 wt%. It was higher value than 0.501 W/mK which was reported for the same amount of silica. It was also found out that the addition of fine sized alumina filler resulted in the smaller decrease in thermal conductivity than the larger sized particles. The viscosity of NCP with alumina addition was increased sharply at the level of 40 wt%. It was due to the increase of the interaction between the filler particles according to the finer particle size. In order to achieve the appropriate viscosity and excellent thermal conductivity with fine alumina fillers, the highly efficient dispersion process was considered to be important.

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.4
• /
• pp.807-817
• /
• 2017

The present study was undertaken to investigate the effect of fermented earthworm cast feed prepared by using three probiotic mixture with Bacillus subtilis strain on meat quality and growth performance of broiler chickens. A total of 240 one-day-old broiler chickens were randomly assigned to four treatments: 1) control, 2) 0.2% commercial product contain strain of Lactobacillus fermentum (CP), 3) 0.3% fermented earthworm cast feed (FECF3); and 4) 0.5% fermented earthworm cast feed (FECF5). Mean body weight gain, thymus, spleen, and F-bursal weight of birds fed with FECF were higher than those of birds fed with control or CP. Serum IgG levels were higher in birds fed with FECF than those in birds fed with CP or control. Cecal Lactobacillus counts were higher whereas Escherichia, Salmonella, Coliform bacteria, and total aerobic bacteria counts were lower in FECF groups than those in CP or control group. Water holding capacities in FECF groups were higher than those in CP or control group. Ratios of n-6/n-3 in chicken meat were lower in FECF groups compared to those in CP or control group.