• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.1192-1195
• /
• 2017

This paper describes the heat resistance characteristics of the imaging device installed in behind the engine due to monitoring the engine condition, and this paper includes the introduction and development of the imaging probe. Because the imaging device which is at the rear end of the engine is exposed to a high temperature and high pressure, the stability of the device should be secured by changing the device shape and supplying cooling water. The imaging probe in ADD engine test facility is installed at the rear end of the engine, and it is designed by reflecting the heat resistance characteristics to ensure the stability of the device.

• Journal of the Mineralogical Society of Korea
• /
• v.17 no.4
• /
• pp.291-297
• /
• 2004

Phosphorus is one of the interesting impurities in diamond, because it produces n-type semiconducting character. The character has been studied with spectroscopic methods as well as electric method, but most of the diamond used for these studies are conducted by the CVD (Chemical Vapor Deposition) diamond. In this study, we synthesized the phosphorus doped HPHT (High Pressure and High Temperature) diamond and investigated the characterization using CL spectroscopy to determine how phosphorus incorporated. As a result, the undocumented peaks of 248 and 603 nm as well as the reported peaks (239 nm, 240 ～ 270 nm) at the previous studies were observed. These luminescence peaks may be due to the complex defect of phosphorus with other impurities such as boron and nitrogen.

• Journal of Powder Materials
• /
• v.14 no.4
• /
• pp.221-229
• /
• 2007

이상에서 살펴본 바와 같이, 내열재료들은 고밀도를 이용하여 비행하는 물체의 운동에너지를 극대화 시킬 수 있기 때문에 군사적으로 각종 무기체계의 성능 향상에 매우 중요하다. 또한 유도 무기 및 항공기의 경우 고온, 고압 등의 환경에서 운용되기 때문에, 이러한 조건에서 견딜 수 있는 소재 개발이 필수적이다. 따라서 무기 선진국에서는 고밀도 재료인 텅스텐, 몰리브덴, 탄탈륨, 텅스텐-구리 감손우라늄을 활용하기 위한 연구를 활발하게 진행하고 있다. 이중, 텅스텐, 몰리브덴, 텅스텐-구리 라이너에 관한 연구는 괄목할 만한 연구 성과를 거두고 있다. 이러한 연구성과는 기존 탄의 관통 성능을 크게 증가시켜, 이에 대응하고자 하는 방어 체계 연구자들을 바쁘게 할 것으로 판단된다. 한편 내열 금속의 경우, 초고온 및 고압과 같은 극한 환경에서의 고온 강도 및 내삭마성이 우수하기 때문에, 각종 유도 무기 체계의 구성 부품, 즉 터빈, 밸브, 노즐, 제트 베인 등에 적용되고 있으나 대부분의 내열 재료들은 제조 방법이 까다롭고, 가공성이 나쁘며, 고가라는 단점들이 있어 이를 극복하는 연구들이 현재 진행 중에 있다.

• Journal of Energy Engineering
• /
• v.13 no.3
• /
• pp.228-233
• /
• 2004

This paper reports production of low-molecular weight carboxylic acids from the hydrothermal treatment of representative organic wastes and compounds with or without oxidant (H$_2$O$_2$). Organic acids such as acetic, formic, succinic and lactic acids were obtained. This result increased to 42mg/g dry waste fish entrails in the presence of H$_2$O$_2$. Experiments on glucose representing cellulosic wastes were also carried out, getting acetic acid of about 29mg/g glucose. Studies on temperature dependance of formation of organic acids showed thermal stability of acetic acid, whereas, formic acid decomposed readily under hydrothermal conditions. In general. results demonstrated that the presence of oxidants favored formation of organic acids with acetic acid being the major product.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.11
• /
• pp.83-88
• /
• 2019

In this study, the high-temperature high-pressure vessel was successfully manufactured, which can be used to store pressurized air and to increase the temperature for the mix performance test of high-temperature high-pressure air with coolant (e.g., water). In this research, static structure analysis and transient thermal analysis were performed using the commercial software Midas NFX 2015 R1. Based on the results, the optimized pressure vessel design was carried out. As a result of the optimized design, the minimum stress and minimum weight were found at 120 mm of the vessel thickness, and the optimized pressure vessel was verified. Finally, through manufacture and performance test (e.g., the non-destructive inspection and hydraulic pressure test), the reliability and safety were validated for the designed pressure vessel.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.11
• /
• pp.109-114
• /
• 2019

Hydraulic pumps are widely used in fields such as machinery manufacturing, engineering and construction. Although the research on hydraulic engineering is mature, it is still necessary to examine various performance aspects in detail for specific applications. This paper will focus on the hydraulic pump used in special construction machinery that needs high temperature and high pressure resistance. It will analyze the theoretical design, structure and thermal characteristics of the pump system using the Fundamentals of Engineering (FE) method, and will measure the key tolerance parameters of the hydraulic pump to ensure the accuracy of the machining. Through this research, a good design method for the linear reciprocating type of hydraulic pump can be summarized.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.4
• /
• pp.68-75
• /
• 2018

This study presents the performance test results and the analyses of the vitiated air heater with high temperature and high pressure. In the performance test, four test conditions and three rake measurement conditions were implemented. In the results of the performance test, the vitiated air heater met targets of temperature and flow rate, and the performance with maximum temperature of 2000 K and maximum combustion pressure of 40 bar was confirmed. Flow rate of provided methane increased 36% more than what was calculated, and 19.6% difference was displayed between measured temperature and theoretically calculated temperature.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.11
• /
• pp.1033-1040
• /
• 2009

One thing to note in cyclone operation and design is to minimize the pressure drop with the enhancement of the efficiency of dust collection. This can be facilitated by the detailed resolution of complex fluid flow occurring inside a cyclone. To this end, the main objective of this study was to obtain the detailed fluid dynamics by the development of a reliable computation method and thereby to figure out the physics of dust collection mechanism for more extreme environment caused by high temperature and pressure condition. First of all, the computer program developed was evaluated against experimental result. That is, the numerical calculation predicts well the data of experimental pressure drop as a function of flow rate for the elevated pressure and temperature condition employed in this study. The increase of pressure and temperature generally affects significantly the collection efficiency of fine particle but the effect of pressure and temperature appears contrary each other. Therefore, the decrease of collection efficiency caused by the high operating temperature mainly due to the decrease of gaseous density can be remedied by increase of operating pressure. After the evaluation of the program, a series of parametric investigations are performed in terms of major cyclone design or operating parameters such as tangential velocity and vortex finder diameter for dusts of a certain range of particle diameters, etc. As expected, tangential velocity plays the most important effect on the collection efficiency. And the efficiency was not affected significantly by the change of the length of vortex finder but the diameter of vortex finder plays an important role for the enhancement of collection efficiency.

• Korean Journal of Materials Research
• /
• v.6 no.3
• /
• pp.253-263
• /
• 1996

고온.고압하에서 장시간 사용되는 고온부재용 구조물은 경년열화현상을 나타낸다 그러므로 구조물의 안정성 측면에서 재질열화의 정도를 정량적으로 평가하는 것이 중요하다. 그러나 실기 구조물에서 채취할 시험편의 크기와 수는 제한이 되기 때문에 새로운 비파괴적인 평가법이 요구되고 있다. 따라서 본 연구에서는 화력발전설비에 이용되는 탄소강과 페라이트강에 대한 열화도의 평가를 위해 입계부식법의 적용 가능성을 조사한다. 시험결과, 재질열화의 정도는 사용시간보다 사용온도에 더 큰 영향을 받았으며, Larson-Miller인자와 열화도([$\Delta$DBTT]SP)사이의 관계는 선형적이었으나, 강종에 따라 다른 기울기를 보였다. 반면, 연성-취성천이온도 ([$\Delta$DBTT]SP)와 격자절단비(Ni/No)와 관계는 강종에 무관하게 선형적인 비례관계를 나타내었다. 또한, [$\Delta$DBTT]SP와 Ni/No 의 관계로부터 입계부식법은 페라이트계 강뿐만아니라 탄소강에 대해서도 유용한 재질열화 평가 방법임을 알 수 있었다.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2000.11a
• /
• pp.79-82
• /
• 2000

필터 집진기는 집진효율, 내열, 그리고 내화학성이 우수하기 때문에 고온 정밀집진 또는 부식성 가스의 집진을 위하여 매우 유용한 장치이다. 그러나 세라믹이나 금속 필터를 사용하는 필터 집진기는 운전 시에 필터의 파손에 대한 잠정적인 우려가 있기 때문에 이를 극복하고 시스템의 신빙성을 100% 확보하는 것이 궁극적인 과제로 인식되고 있다. 고온 세라믹 필터의 활용이 가장주목시 되고있는 IGCC 집진의 경우 석탄가스화 및 탈황 과정에서 발생되는 분진을 고온고압에서 제거하여 가스터빈을 보호하는 공정으로써 운전중에 필터가 파손되면 그 부분으로 분진가스가 급격히 빠져나가 큰 분진 입자가 가스터빈으로 유입되고 심한 경우에는 파손된 필터의 파편이 여기에 동반될 수 있다.(중략)