• 제목/요약/키워드: 고연소도

검색결과 534건 처리시간 0.02초

환경친화형 연료분할-고속분사식 버너 개발 (A Development of Environmental-friendly Burner with High Injection Velocity by Multi-staged Fuel-injection)

  • 추재민;고영기;김종우;김철민
    • 한국연소학회:학술대회논문집
    • /
    • 한국연소학회 2005년도 제31회 KOSCO SYMPOSIUM 논문집
    • /
    • pp.148-155
    • /
    • 2005
  • In this study, Development of 300,000kcal/hr high velocity Injection burner with fuel multi-stage was performed using experiments. The characteristics of NOx emission in multi fuel/air staged combustor have been experimentally studied. The design concept of multi fuel/air staged combustor is creation of two separate flame, a primary flame is largest access air combustion and the secondary flame is complete combustion zone, where most of fuel bums. Experiments were performed on an industrial scale in a laboratory furnace and Liquefied Natural Gas(LNG) was used as primary and secondary fuels. Comparison of outlet NOx and outlet Temperature under various air rate and primary/ secondary fuel ratio was performed. The test demonstrated that NOx emission con be reduced by 70% in accordance with operating conditions.

  • PDF

고에너지펄스를 이용한 충격파 발생과 응용 (Laser Supported Combustion Waves and Plasma Flows)

  • 이현희;최지혜;곽민철;여재익
    • 한국연소학회:학술대회논문집
    • /
    • 한국연소학회 2007년도 제34회 KOSCO SYMPOSIUM 논문집
    • /
    • pp.27-30
    • /
    • 2007
  • We have been setting up experiments on propagation of shock waves generated by the pulsed laser ablation. One side of a thin metal foil is subjected to laser ablation as a shock wave is generated from a localized spot of high intensity energy source. The resulting reactive shock wave, which penetrates through the foil is reflected by an acoustic impedance which causes the metal foil to high-strain rate deform. This short time physics is captured on an ICCD camera. The focus of our research is generating reactive shock wave and high strain rate deforming of thin metal foil for accelerating micro-particles to a very high speed on the orders of several thousand meter per second. Somce innovative applications of this device will be discussed.

  • PDF

고불안정 조건에서의 3차원 데토네이션 파면 구조 해석 연구 (Numerical Study of Three Dimensional Detonation Waves Structure in Highly Unstable Mode.)

  • 조덕래;원수희;신재렬;최정열
    • 한국연소학회:학술대회논문집
    • /
    • 한국연소학회 2012년도 제45회 KOSCO SYMPOSIUM 초록집
    • /
    • pp.359-362
    • /
    • 2012
  • The results are shown highly unstable mode's detonation dynamics by compared with weakly unstable mode. And we investigate the difference and similar features of 2D and 3D results. By using PSD via FFT, the effects of pre-exponential factor difference and of unstable mode were investigated in this study. The result of PSD is shown pulsed features in weakly unstable mode, but noselike in highly unstable mode. By compared between Sheliren image and overlaid slice image, the irregular feature of detonation waves structure was discussed in highly unstable mode.

  • PDF

압력섭동과 연관된 연소응답모델에 기초한 고주파 연소불안정의 이론-수치적 고찰 (Hybridal Analysis of High-Frequency Combustion Instability with Pressure-Coupled Combustion Response Model)

  • 윤웅섭;이길용
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2003년도 제20회 춘계학술대회 논문집
    • /
    • pp.253-257
    • /
    • 2003
  • Theoretical-numerical analysis of wave instability is conducted with parametric response function model. Fluctuating instantaneous mass evaporation rate functionally coupled with pressure perturbations with phase lag is assumed to examine the validity of the method. With sufficiently large amplitude and less phase lag to perturbation, combustion response is resonant to pressure waves, unstable waves are amplified, and the system is driven to instability. Magnitude of response is a crucial instability parameter in the determination of a stability margins and makes a critical change of balancing conditions between the amplifying and damping acoustic energies. In the phase regime the unstable waves are amplified, whereas, the acoustic waves are attenuated in the out-of-phase regime. In the intermediate regime, no distinct tendency of unstable waves was determined.

  • PDF

새로운 집진기술 동향 (New Directions of Particulate Control Technology)

  • 김용진;정상현
    • 한국대기환경학회지
    • /
    • 제11권3호
    • /
    • pp.221-231
    • /
    • 1995
  • 산업발달에 따라 불가피하게 생성되며, 대기오염의 주종을 이루면서 인체에 가장 유해한 분진입자는 산업체의 오일(oil) 및 석탄연소 보일러, 자동차, 제철/제강 및 시멘트 플랜트 등으로 부터 배출되는 미세입자(fine particle)들이며, 앞으로 이들의 제어에 관한 연구가 지속적인 관심의 대상이 될 것이다. 한 예로, 석탄연소 화력발전소로부터 1$\mum$ 이하의 입자들의 배출량은 무게비로는 1% 이하이지만 입자수의 비율에서는99%를 차지하고 있다. 이들은 매우 높은 중금속 함유량을 지니고 있기 때문에 인체의 호흡시 심각한 문제를 유발시킬 뿐만 아니라, 이러한 미세입자들은 대기중에 부유하고 있다가 비(rain)에 의하여 세정되어 수질오염까지도 유발시킨다. 1992년 2월 공포된 대기환경보전법 시행규칙에 따라 분진배출 허용기준이 장기 입법예고 되므로서 1995년 1월과 1999년 1월의 2단계에 걸쳐 현재 적용 받고 있는 분진배출 규제치보다 훨씬 낮은 선진국 수준의 분진배출 규제가 요구되고 있으며, 분진이 배출되는 인근지역주민의 민원에 대처하기 위해서는 연돌로부터 분진배출이 눈에 감지되지 않을 정도까지 분진배출농도를 관리해야할 필요성이 높아지고 있다. 이에 따라 집진장치의 효율도 중유전소 Boiler 의 경우는 90% 이상, 석탄전소 Boiler의 경우는 99.5% 이상의 고효율이 요구되고 있다.

  • PDF

미연분 및 NOx배출 특성에 대한 고회분탄의 영향 연구 (Effect of High Ash Coal on Unburned Carbon and NOx Emission)

  • 김상인;이병화;임호;안기주;김만철;송주헌;전충환
    • 한국연소학회:학술대회논문집
    • /
    • 한국연소학회 2012년도 제44회 KOSCO SYMPOSIUM 초록집
    • /
    • pp.341-342
    • /
    • 2012
  • The effect of high ash coal which has relatively high ash content and low combustibility on unburned carbon and NOx emission was experimentally investigated at several excess air ratio and particle size conditions of four coals containing different ash content in a drop tube furnace. Flue gas was measured by Gas analyzer in order to figure out unburned carbon characteristics. The results show that the higher content of ash makes the higher unburned carbon rate, subsequent changes in NOx emission characteristics was investigated.

  • PDF

플라즈마 응용 고 에너지 점화 시스템 개발 및 적용 (Development and Application of High Energy Ignition System Using Plasma)

  • 강혜현;최두원;박진일;이종화;박경석;안종영
    • 한국자동차공학회논문집
    • /
    • 제22권3호
    • /
    • pp.148-156
    • /
    • 2014
  • This study is a follow-up study of "Development of Plasma Ignition System" was presented at the 2013 KSAE spring conference. This study compares lean limit of conventional ignition system with plasma ignition system on constant volume combustion test & Engine Combustion test.

고 발열량 산업폐기물을 처리하는 소형 소각로의 소각 및 배출 특성 (Combustion and Emission Characteristics of High Calorific Industrial Waste Burned in a Small-scale Incinerator)

  • 이교우;이성준;김병화;이승우;정종수
    • 한국연소학회지
    • /
    • 제7권2호
    • /
    • pp.42-48
    • /
    • 2002
  • Experiments on burning process of the industrial wastes were performed on a nozzle-type grate in the industrial waste incinerator with a capacity of 160 kilograms per hour. The temporal variations of temperatures and concentrations of the exhaust gas were measured and analyzed. The synthetic leather waste with the moisture content less than 2% was used. The experimental results show that the CO concentration in the exhaust gas exceeds the limit, 600 ppm, and the gas temperature fluctuates too much when 8 kg of waste was supplied every 3 minutes, equivalent to the capacity of 160kg per hour. That is a typical burning mode of this high-calorific industrial waste. When the smaller unit waste input, 6kg per every 2 min 15 seconds was supplied, we could reduce the fluctuations of the furnace temperature and improve the exhaust emissions, especially the CO concentration.

  • PDF

대형 직접분사식 CNG기관의 희박한계 확장에 관한 연구 (A Study on Expansion of Lean Limit for Heavy-Duty DI Engine with Compressed Natural Gas)

  • ;이광주;이종태
    • 한국수소및신에너지학회논문집
    • /
    • 제22권5호
    • /
    • pp.735-740
    • /
    • 2011
  • 본 연구에서는 직접분사식 CNG기관의 희박한계를 보다 확장하여 고효율 및 저배기 공해를 실현시키고자 실린더 내에 고압의 천연가스를 직접분사함과 동시에 흡입과정 중 흡기관 내에 소량의 저압천연가스를 보조분사하는 경우의 희박한계 확장 및 제반특성에 대해 검토하였다. 그 결과, 흡기보조분사가 없을 경우 희박한계가 ${\lambda}$ = 1.4 까지였으나, 흡기보조분사율이 5~15% 정도에서는 희박한계가 ${\lambda}$ = 1.5 까지 확장되었다. 이는 흡기보조분사에 따른 혼합기의 혼합율 향상에 기인한 것으로 해석하였다. 연소기간은 줄어들었지만, 흡기보조분사의 효과는 주연소기간에서 조기연소기간보다 강하게 나타났다.

고로미분탄 취입랜스의 연소효율 향상을 위한 노즐 제어의 최적화 (Pulverized Coal Injection System Development to Raise Combustion Efficiency of a Blast Furnace)

  • 최승현;곽남수;김재열
    • 한국생산제조학회지
    • /
    • 제18권6호
    • /
    • pp.690-696
    • /
    • 2009
  • This paper introduces the automatic fine Bituminous Coal injection lance position control method using flame image process. The fine Coal injection lance is used to supply additional heat into the furnace in Mill plant. It injects fine coal into high pressured air flow and produces very heated and high pressured flame. For the such high temperature and pressure, the fine coal injection lance effects not only efficiency of burner but also furnace abrasion. To keep efficient combustion status and to avoid the abrasion, in this paper, the flame is monitored by computer image process. This paper proposes the flame image process method and lance position control according to calculated result for flame image process.

  • PDF