• Journal of the Korea Convergence Society
• /
• v.8 no.9
• /
• pp.1-7
• /
• 2017

As the network environment develops and speeds up, a lot of smart devices is developed, and a high-speed smart society can be realized while allowing people to interact with objects. As the number of things Internet has surged, a wide range of new security risks and problems have emerged for devices, platforms and operating systems, communications, and connected systems. Due to the physical characteristics of IoT devices, they are smaller in size than conventional systems, and operate with low power, low cost, and relatively low specifications. Therefore, it is difficult to apply the existing security solution used in the existing system. In addition, IoT devices are connected to the network at all times, it is important to ensure that personal privacy exposure, such as eavesdropping, data tampering, privacy breach, information leakage, unauthorized access, Significant security issues can arise, including confidentiality and threats to facilities. In this paper, we investigate cases of security threats and cases of network of IoT, analyze vulnerabilities, and suggest ways to minimize property damage by Internet of things.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.2B
• /
• pp.1-10
• /
• 2005

TCP/IP protocols have been implemented in software program running on CPU in end systems. As the increased demand of fast protocol processing, it is required to implement the protocols in hardware, and Host Interface is responsible for communication between external CPU and the hardware blocks of TCP/IP implementation. The Host Interface follows AMBA AHB specification for the communication with external world. For control flow, the Host Interface behaves as a slave of AMBA AHB. Using internal Command/status Registers, the Host Interface receives commands from CPU and transfers hardware status and header information to CPU. On the other hand, the Host Interface behaves as a master for data flow. Data flow has two directions, Receive Flow and Transmit Flow. In Receive Flow, using internal RxFIFO, the Host Interface reads data from UDP FIFO or TCP buffer and transfers data to external RAM for CPU to read. For Transmit Flow, the Host Interface reads data from external RAM and transfers data to UDP buffer or TCP buffer through internal TxFIFO. TCP/IP hardware blocks generate packets using the data and transmit. Buffer Descriptor is one of the Command/Status Registers, and the information stored in Buffer Descriptor is used for external RAM access. Several testcases are designed to verify TCP/IP functions. The Host Interface is synthesized using the 0.18 micron technology, and it results in 173 K gates including the Command/status Registers and internal FIFOs.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.11
• /
• pp.1154-1161
• /
• 2006

Air drying equipment was built as a device for reduction of dewatered cake from wastewater and waterworks sludge and to reproduce it by reusable matter. Dewatered cake was supplied into the air drying equipment which operated by air velocity of 80 m/sec, air rate 30 $m^3/min$ and air temperature of $40^{\circ}C$, and dried to produce the dried powder. The air drying equipment was composed of the air ejector which made high-speed fluid field, and cyclone which made circling fluid field. Dewatered cake was crushed at the high-speed zone as first step, and formed into dried powder of sphere shape by the collision between particles at the circling fluid zone.. Wastewater sludge with water content of 82.5 wt% was supplied 1.0 kg/min into air drying equipment and produced the dried powder which had the water content of 62.3 wt% and mass median diameter of 2.4 mm after process. At that time, it was analyzed that water removal rate was 0.1 $H_2O{\Delta}kg/min{\cdot}DS$ kg and air consumption was 170 $m^3/DS$ kg. Under same experimental conditions, when waterworks sludge was dried, water content of dried powder decrease to 47.5 wt% and mass median diameter decrease 2.1 mm and water removal rate increase 0.13 $H_2O{\Delta}kg/min{\cdot}DS$ kg. Air consumption increase 180 $m^3/DS$ kg with comparison to the results of wastewater sludge. Therefore, this technology was evaluated that drying the dewatered cake of waterworks sludge was more efficient than wastewater sludge, and also economical sludge handling technology due to drying the cake by only air.

• Journal of Broadcast Engineering
• /
• v.12 no.6
• /
• pp.611-623
• /
• 2007

The H.264|AVC standard incorporates an intra prediction tool into inter frame coding. However, this leads to excessive amount of increase in encoding time, thus resulting in the difficulty in real-time implementation of software encoders. In this paper, we first propose an early decision on intra prediction coding and a fast intra prediction method using the characteristics of block contents and the context of neighboring block modes for the intra prediction in the inter frame coding of H.264/AVC. Basically, the proposed methods determine a skip condition on whether the $4{\times}4$ intra prediction is to be used in the inter frame coding by considering the content characteristics of each block to be encoded and the context of its neighboring blocks. The performance of our proposed methods is compared with the Joint Model reference software version 11.0 of H.264|AVC. The experimental results show that our proposed methods allow for 41.63% reduction in the total encoding time with negligible amounts of PSNR drops and bitrate increases, compared to the original Joint Model reference software version 11.0.

• Journal of KIISE:Information Networking
• /
• v.30 no.4
• /
• pp.461-473
• /
• 2003

Multimedia applications are much more sensitive to QoS(Quality of Service) than text based ones due to their data continuity. In order to provide a fast moving MH(Mobil Host) using multimedia application with a consistent QoS,an efficient call admission mechanism is in need. This paper proposes the 2SCA(2-Step Call Admission) scheme based on cal admission scheme using pripority to guarantee the consistent QoS for mobile multimedia applications. A calls of MH are classified new calls, hand-off calls, and QoS upgrading calls. The 2SCA is composed of the basic call admission and advanced call admission; the former determines the call admission based on bandwidth available in each cell and the latter determines the call admission by applying DTT(Delay Tolerance Time), PQeueu(Priority Queue), and UpQueue(Upgrade Queue) algorithm according to the type of each call blocked at the basic call admission stage. In order to evaluate the performance of our mechanism, we measure the metrics such as the dropping probability of new calls, dropping probability of hand-off calls, and bandwidth utilization. The result shows that the performance of our mechanism is superior to that of existing mechanisms such as CSP(Complete Sharing Policy), GCP(Guard Channel Policy) and AGCP(Adaptive Guard Channel Policy).

• International Journal of Highway Engineering
• /
• v.9 no.3
• /
• pp.39-50
• /
• 2007

Barrier VII program is normally used for the design of flexible barrier, but if modelled properly it can be used for the analysis of vehicle impact to small sign posts. In this paper sign post is shown to be modelled as flexible barrier by combining beam and column elements at each beam node. Simulations with the Barrier VII program have been made for 7 impact cases composed of sign posts of circular and H section with rigidly connected support and breakaway support system. The impact speed used for the simulation ranged from 30km/h to 110km/h. The study shows that in the vehicle impacts to a circular sign post with high speed, the large deflection and high inertia force causes the sign plate to hit the windshield leading to a hazard to the occupants. It is also shown that impact to H section post results in small deflection of the post and abrupt velocity change and high deceleration of the impact vehicle causing severe damage to both the vehicle and occupants. Simulation study also shows that breakaway support system eliminates the potential danger of the vehicle impact to the rigidly connected small sign posts by reducing deflection of the post, abrupt change in velocity and deceleration level.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.36 no.3
• /
• pp.195-201
• /
• 2016

Eddy current testing (ECT) is commonly applied for the inspection of automated production lines of metallic products, because it has a high inspection speed and a reasonable price. When ECT is applied for the inspection of a metallic object having an uneven target surface, such as the spline gear of a spline shaft, it is difficult to distinguish between the original signal obtained from the sensor and the signal generated by a defect because of the relatively large surface signals having similar frequency distributions. To facilitate the detection of defect signals from the spline gear, implementation of high-order filters is essential, so that the fault signals can be distinguished from the surrounding noise signals, and simultaneously, the pass-band of the filter can be adjusted according to the status of each production line and the object to be inspected. We will examine the infinite impulse filters (IIR filters) available for implementing an advanced filter for ECT, and attempt to detect the flaw signals through optimization of system design parameters for detecting the signals at the system level.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.10
• /
• pp.1845-1852
• /
• 2008

The key elements of inter prediction are motion estimation(ME) and motion compensation(MC). Motion estimation is to find the optimum motion vectors, not only by using a distance criteria like the SAD, but also by taking into account the resulting number of 비트s in the 비트 stream. Motion compensation is compensate for movement of blocks of current frame. Inter-prediction Encoding is always the main bottleneck in high-quality streaming applications. Therefore, in real-time streaming applications, dedicated hardware for executing Inter-prediction is required. In this paper, we studied a motion estimator(ME) for H.264/AVC. The designed motion estimator is based on 2-D systolic array and it connects processing elements for fast SAD(Sum of Absolute Difference) calculation in parallel. By providing different path for the upper and lower lesion of each reference data and adjusting the input sequence, consecutive calculation for motion estimation is executed without pipeline stall. With data reuse technique, it reduces memory access, and there is no extra delay for finding optimal partitions and motion vectors. The motion estimator supports variable-block size and takes 328 cycles for macro-block calculation. The proposed architecture is local memory-free different from paper [6] using local memory. This motion estimation encoder can be applicable to real-time video processing.

• Korean Journal of Optics and Photonics
• /
• v.29 no.1
• /
• pp.19-27
• /
• 2018

A change in object distance would generally change the magnification of an optical system. In this paper, we have proposed and designed a double-Gauss optical system with a fixed magnification and image surface regardless of any change in object distance, according to moving the lens groups a little bit to the front and rear of the stop, independently parallel to the direction of the optical axis. By maintaining a constant size of image formation in spite of various object-distance changes in a projection system such as a head-up display (HUD) or head-mounted display (HMD), we can prevent the field of view from changing while focusing in an HUD or HMD. Also, to check precisely the state of the wiring that connects semiconductor chips and IC circuit boards, we can keep the magnification of the optical system constant, even when the object distance changes due to vertical movement along the optical axis of a testing device. Additionally, if we use this double-Gauss optical system as a vision system in the testing process of lots of electronic boards in a manufacturing system, since we can systematically eliminate additional image processing for visual enhancement of image quality, we can dramatically reduce the testing time for a fast test process. Also, the Gaussian bracket method was used to find the moving distance of each group, to achieve the desired specifications and fix magnification and image surface simultaneously. After the initial design, the optimization of the optical system was performed using the Synopsys optical design software.

• The Journal of the Korea Contents Association
• /
• v.21 no.7
• /
• pp.127-133
• /
• 2021

In industrial IoT environments, sensors generate data for their detection targets and deliver the data to IoT gateways. Therefore, managing large amounts of real-time sensor data is an essential feature for IoT gateways, and key-value storage engines are widely used to manage these sensor data. However, key-value storage engines used in IoT gateways do not take into account the characteristics of sensor data generated in industrial IoT environments, and this limits the performance of key-value storage engines. In this paper, we optimize the key-value storage engine by utilizing the features of sensor data in industrial IoT environments. The proposed optimization technique is to analyze the key, which is the input of a key-value storage engine, for further indexing. This reduces excessive write amplification and improves performance. We implement our optimization scheme in LevelDB and use the workload of the TPCx-IoT benchmark to evaluate our proposed scheme. From experimental results we show that our proposed technique achieves up to 21 times better than the existing scheme, and this shows that the proposed technique can perform high-speed data ingestion in industrial IoT environments.