• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.9
• /
• pp.8-13
• /
• 2014

Currently it is major problem of electric railway with increasing drive speed such as the arc generated by the pantograph detachment and the distortion current in the motor-block high speed switching. When physical contact between the pantograph and the catenary line is separated, the pantograph detachment arcing occurs and it makes up the conductive noise to the return feeder. We made the EMTP modeling of the railway traction system and the pantograph arc by circuit elements and switches. The influence of pantograph detachment frequency is investigated by changing some frequencies. The over-current occurs in each detachment and it oscillates some time at beginning and stabilizes gradually. The magnitude of over-current is decided by instantaneous value of existing traction return current. If the detachment occurs at a point of peak value or distortion current, the over-current will be more harmful to the power systems connected with the return feeder and will become to arise with increasing detachment frequency.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.65 no.4
• /
• pp.298-302
• /
• 2016

Currently, logistics are in small quantities and in diverse forms, and the amounts are continuously increasing. Railway logistics however are losing their market share every year mainly due to low operation speed and loading time, which means the trucks are covering the most of the freights. In order to solve these situations, this paper proposed the high speed freight train as working multi-modality with other modes to make effective transshipment. The high speed freight train has maximum operation speed of 300km/h and electric power to run centralized power supply. There are large dual door system, bogie system covering fluctuating load of 15[ton], automatic loading device, ULD(unit load device) bed and ULD locking system in this freight rolling stock. We calculated the performance of powering and braking capacity for this train and proposed how many vehicles are composed of train set. The results in this paper can help to make a decision to define the technical specification of High-speed freight train for the efficiency of rail freight service.

• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.652-657
• /
• 2004

Korean High Speed Train (KHST) designed to operate at 350km/h has been tested on KyungBu high speed line since it was developed in 2002. The specification of the interior noise level for high speed train in Korea has been adopted through the contract between KHRC and Korea TGV consortium, not a national specification. But it can not be adopted to KHST designed at 350km/h because this has involved up to 300Km/h. Therefor, in this paper, the interior noise level at 350km/h are predicted in passenger car using the results at 300Km/h and these results show that the KHST's interior noise levels are good up to 300Km/h but need to be reduced at 350Km/h in the view point of limit value at 300Km/h of the contract between KHRC and Korea TGV consortium. Also it proposed to make a national specification for the interior noise level to evaluate it in detail at 350Km/h.

• Journal of the Korean Society for Railway
• /
• v.10 no.6
• /
• pp.772-778
• /
• 2007

For the wear characteristics assessment of Saemaul train passing through curves, an analysis model for multi-car system has been developed. By using this model and ADAMS/Rail, sensitivity analyses have been conducted for the wear characteristics by changing the related parameters. At low speed, the wear number and the sliding mean of right wheel showed higher than left wheel, while those of left wheel showed higher than right wheel at high speed. According to the decrease of curve radius, the wear number and the sliding mean were increased. When the length of transition curve was increased, the wear number and the sliding mean was increased. And according to increase of cant, the wear number and the sliding mean were increased.

• 한국태양에너지학회:학술대회논문집
• /
• 2009.04a
• /
• pp.263-268
• /
• 2009

The current focus of domestic car industry is moving from technological development to reducing greenhouse gas. This study investigates and measures the HVAC system and indoor air condition of highway buses, which is conducted to develop a HVAC system using natural energy in the future. The measurements show that thermal balance is not fulfilled because heating sources are randomly placed, and relative humidity is in the 20 percent range both in HVAC and non-HVAC systems, which is far below 40%, or the highest thermal comfort level. CO2 concentration was found to be an average of 1500 ppm, but not more than 2522 ppm with 15 persons on board, and with 29 persons on board, an average of 2053 ppm, but not more than 3066 ppm, both of which far exceed allowed CO2 concentration level, or 1000 ppm. Generally, highway buses drop by rest stops and open doors for 15 to 20 minutes for getting in fresh air. But its air improvement effect is temporary, and it exacerbates indoor air condition.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.10 no.3
• /
• pp.233-240
• /
• 2005

In this paper, AC electric vehicle propulsion system(Converter/Inverter) using high power semiconductor, IPM is proposed. 2-Parallel operation of two PWM converter is adopted for increasing capacity of system and the harmonic content is eliminated by the phase shaft between two PWM converters switching phase. VVVF inverter control is used a mixed control algorithm, where the vector control strategy at low speed region and slip-frequency control strategy at high speed region. The proposed propulsion system is verified by experimental results with a 1,350kW converter and 1,100kVA inverter with four 210kW traction motors.

• Proceedings of the KIEE Conference
• /
• 2004.07d
• /
• pp.2359-2361
• /
• 2004

초대형 컨테이너선을 대비하여 기존의 자동화 이송 시스템인 AGV는 자동화, 유지보수의 어려움 등으로 인해 많은 문제점이 있다. 이에 대한 방안으로, 새로운 이송 시스템인 LMTT(Linear Motor based Transfer Technology) 시스템을 제안하였다. 특히 LMTT는 자동화, 고속화가 용이할 뿐만 아니라 AGV에 비해서 친환경적이다. 따라서 이와 유사한 새로운 이송시스템에 대해서 많은 연구가 진행이 되고 있음에도 불구하고, LMTT 시스템은 거대한 서보 시스템으로서 특히 선형 모터(Linear Motor)는 차량의 무게에 의한 마찰력의 영향을 많이 받으며, 이러한 마찰력은 LMTT 시스템의 속응성의 저하 요인으로서 작용 하게된다. 따라서 본 연구에서는, 새로운 이송 시스템인 LMTT에 대하여 부상력을 고려함으로서 정지 마찰력을 감소시켜 시스템 속응성을 향상시킬 수 있는 연구를 수행하였다.

• 한국전산유체공학회:학술대회논문집
• /
• 2004.10a
• /
• pp.177-180
• /
• 2004

The development of a tilting train with construction of electric line on the conventional railway is required for speed-up on the conventional railway with many curving sections. For development of tilting train, the study and development of the tilting system and tilting bogie having the different mechanism with a general high speed train will play a main role for improving the technology in the field of Korean railway The study and development of the pantograph tilting mechanism in order to keep a good contact behavior between a pantograph and a contact wire by tilting a pantograph on the opposite direction of the vehicle tilting direction. In this study, we analyzed the aerodynamic characteristic of a developing pantograph on the tilting train and obtained the contact force with catenary by aerodynamic lift force by the aerodynamic analysis. We also performed the numerical analysis for design the device controlling lift force on a pantograph. From the aerodynamic simulation and parameter study for a device to control the lift force, we will suggest the various shape and the optimal shape of it corresponding to a developing tilting pantograph. The Fluent software is used for the calculation of flow profile in this study.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.11
• /
• pp.1037-1042
• /
• 2007

KTX trains show a high interior noise level in tunnel with concreted track at 300 km/h. Generally, the concreted track has higher sound emissions compared with ballasted track due to the reduced absorption and the major sources of interior noise for KTX are known as the aerodynamic noise and rolling noise. Therefore, It is necessary to find out noise source and noise components to affect interior noise in tunnel with concreted track. In this study, we measure the noise and vibration inside KTX in tunnel in order to find the cause of the interior noise of KTX. The analysis results show that the interior noise of KTX in tunnel with concreted track is increased sharply by a low frequency below 80 Hz. We know that the low frequency noise inside KTX in tunnel with concreted track is generated at the natural frequency of carbody by aerodynamic noise outside gangway and rolling noise. In order to reduce the noise level at 80 Hz, modification of mud-flap length between carbodys is suggested and the effect of noise reduction is examined in tunnel with concreted track.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.910-920
• /
• 2010

To past, from Seoul to Jinju it takes about six-hours by train or Expressway. An expressway between Daejeon and Jinju opens perfectly it 2001 November 29th After that time, The section that road traffic showed superiority to drive and express bus, and railroad traffic lost competitiveness, The section that train user decreases gives besides only one-time train is run day worked. This study comparative analysis calls various data about these sections, There is the Jinju or Gyeongsangnam-do western part and Gyeongnam-do northwestern part, Gyeongsangbuk-do southwestern part. I compete with a road traffic means as I am connected to the Central inland line railroad during a plan and to propose the guideline to use railroad more activity.