• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.907-914
• /
• 2005

Studied was a strategic plan for the Korean High-Speed Train system to penetrate the Chinese railway market in exchange of the technology of KHST. Firstly, taken was a glance at Chinese Government plans to extend total length of his railway lines and to construct the $Beijing\~Shanghai$ high-speed railway line. Then, disparity of railway technology in Korea and China was reviewed. From the review, SWOT Analysis were carried out to penetrate the foreign markets. Countermeasures to cope with SWOT were also considered. Strategical governmental supports and the establishment of the special organization to be charge of penetration of KHST into foreign markets were proposed. Finally, also proposed was the transfer of KHST technology to Chinese counterparts in exchange of tangible benefits for Korean side, The benefits may include (1) adoption of KHST as the type of rolling stock for the $Beijing\~Shanghai$ line, (2) guarantee of participation in the project and royalty for the KHST technology used for the future high-speed railway line construction. (3) prior written approval and partnership when making its way to third country, and (4) participation of Korean construction companies in Chinese railway construction project. etc. Adoption of KHST in China indeed gives chance to integrate the high-speed railway network after reunification of Korean peninsular, and enhance the economic ties between two countries.

• Journal of IKEEE
• /
• v.27 no.4
• /
• pp.501-511
• /
• 2023

This paper introduces and analyzes SAE J2716 SENT (Single Edge Nibble Transmission) protocol, a technical standard for serial transmission of digital sensor data in automotive applications. SENT can transmit both high-speed sensor data and low-speed sensor data in one data frame and has a total of 6 transmission modes, including 3 high-speed channel modes and 3 low-speed channel modes. In this paper, a SENT controller that supports all six modes of the SENT protocol was designed in Verilog HDL, implemented in FPGA, and verified with an oscilloscope and PC.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.132-137
• /
• 2011

Many studies are being conducted to improve high speed, light weight and safety of passenger. To improve safety of rolling stock, safety of running performance is most important, and optimizing flow lubrication in driving gear is essential. This study simulates lubricant flow change in driving gear casing which is splashed by the surface of low speed gear teeth following rotational direction of driving gear unit for EMU by using CFD analysis, and based on analysis detail, non-load actual test is conducted for similar driving condition to find out suitability of analysis, selection of lubricate and stability of driving gear.

• Journal of the Korean Society for Railway
• /
• v.15 no.4
• /
• pp.352-356
• /
• 2012

Heights of a platform above the rail for the passenger train in the country are classified into two categories such as the low level (500mm; mainline) and the high level (1,135mm; metropolitan subway line) platforms. In order to operate similarly both a mainline railroad and a metropolitan subway line, as the requisite door safety system, it is necessary to develop the doorstep equipment of the rolling stock regardless of both the low and high level platforms. In this study, Structural analysis and mechanical strength test of doorstep equipments used for two types of platforms are performed on the supposition that the train only for the low level platform could stop in the both low and high level platforms.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.2
• /
• pp.158-164
• /
• 2015

The main mission of OTM(On-The-Move) satellite communication system is to provide satellite communication service while moving on a vehicle. So it should have a capability to maintain a reliable communication channel when it travels at high speeds or in a severe fluctuation region. This paper presents a small-sized multi-mode monopulse structure applicable to OTM satellite communication system which has only single mode-coupler with a pair of slot using a feature of circular polarized received signal. And tracking error signal is defined using fundamental and high-order modes.

• International Journal of Highway Engineering
• /
• v.7 no.4 s.26
• /
• pp.57-68
• /
• 2005

Vehicle classification system in Korea is operated by two different types depending on operating purpose and place. 8-category classification system operates in Expressway and Provincial road, and 11-category classification system operates in National highway. These different operations decrease the efficiency of practical use of gathering data. Therefore, this study proposes new-modified vehicle classification system for solving this problem. For classification, this study not only focuses on mechanic survey system which is based on vehicle specs, it's also focuses on the applicability of roadside survey. This proposed classification system considers the tendency to vary of vehicle types, and the compatibility with the other classification systems. This system might be the most suitable system for our present situation.

• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.179-179
• /
• 2011

이동의 편리함과 주행안정성을 주기 위해 개발된 도로가 소음을 발생시켜 운전자 및 소비자의 쾌적성을 저해하는 요소로 작용하고 있다. 이러한 문제를 해결하기 위해 연도거리확보 또는 방음벽 등의 소음억제 방법을 사용하고 있으나 미관을 저해하고 용지사용이 비효율적이어서 외국의 경우 저소음 포장 연구를 통한 근본적은 소음 발생원을 차단하기 위한 노력이 진행되고 있다. 국내에서도 신도시 개발 등으로 도로건설에 따른 급속한 교통량 증가 및 차량의 고속주행으로 인하여 도시소음의 주요인으로 부각되고 있고 시민들의 높은 생활수준과 소음 환경에 대한 기본생활권 추구 성향이 증대되어 지역 주민의 교통소음 저감 대책 및 보상에 대한 법적 소송이 빈번히 발생하고 있어 차량 주행 소음 저감을 위한 방법으로 방음벽 설치가 널리 사용되고 있으나 이는 경제적 손실뿐만 아니라 도시미관을 해치는 문제가 발생하고 있다. 도로사업의 환경성 강화는 국토해양부의 2009년 주요도로정책 중 하나일 정도로 국가정책의 중요한 지침으로써, 향후 추진되는 신도시 및 단지조성공사 시 도로 환경성과 소음, 진동, 그리고 생태통로에 대한 친환경 도로설계 및 시공 등에 적절히 대응하기 위하여 교통소음을 개선하기 위해서는 교통소음 발생 요소를 파악하고 신도시 및 단지조성시 주변도로에 친환경적 포장공법 설계기술의 개발 및 적용을 위한 단계적 연구가 필요하다. 따라서 본 연구에서는 친환경 저소음 포장공법의 종류에 대하여 알아보고자 한다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.12
• /
• pp.277-284
• /
• 2012

In this paper, we analyzed various noise in the video stream system that have largely influence on EMI noise. We presented the remedy for these various noises and then designed the wireless video streaming system for a vehicle. To minimize EMI noise, we derived the improvement of noise characteristic from impedance matching, new design of the inner layer of the PCB line design and new design of high-speed data Interfaces. As a result, the final system showed 40[dBuV/m] and 47[dBuV/m] dB in the each regulation band.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.14 no.4
• /
• pp.80-85
• /
• 2015

The era of intelligent transportation system(ITS) has been arrived by applying information and communication technology(ICT) to the traffic. One of these technological advances is a wireless communication technology for a high speed vehicle to be connected to an infrastructure(V2I). A variety of road traffic safety services and operator comfort services are being developed by means of WAVE(Wireless Access in a Vehicular Environment) based on IEEE802.11p Standard. In this paper, the link budget is analyzed to provide a reliable quality of these ITS services. Log-distance model and two-ray model is employed for the wave propagation path loss model which is adequate for a highway environment. Reliable cell coverage is suggested for ITS services from the link budget.

• Proceedings of the KWS Conference
• /
• 2010.05a
• /
• pp.67-67
• /
• 2010

최근 전 세계적으로 유가상승 및 환경에 대한 관심이 증대되면서 자동차 업계에서는 차량 경량화를 통한 연비향상에 대한 연구가 활발히 진행되고 있다. 대표적인 차량 경량화 방법으로 초경량 철강 차체의 개발을 들 수 있는데 이는 고강도강을 차체에 적용함으로써 강성을 증대시킴과 동시에 두께 감소에 의한 경량화를 이루는 방법이다. 하지만 고강도강은 자체의 높은 강성을 지니는 반면 첨가된 합금원소에 의하여 용접성이 떨어지는 제약을 가지고 있다. 펄스 GMA 용접은 One Drop Per Pulse (ODPP) 의 안정된 용적 이행으로 스패터 발생이 거의 없으며 일반 GMA 용접에 비하여 용접성이 우수하여 자동차 차체 조립공정에 적용되고 있다. 본 연구에서는 440MPa 급 도금, 비도금 강판 및 이종 강판의 겹치기 용접 실험을 통해 강종별, 두께별 펄스 아크 용접에 대한 용접성 평가 및 데이터 베이스를 구축하고자 하였다. 용접부 단면마크로, 인장시험, 경도시험을 통해 적정 용접영역을 확보하였으머, 고속카메라 촬영을 통해 보호가스에 따른 용적 이행 현상을 확인하였다.