• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.10a
• /
• pp.536-538
• /
• 2017

UHD high speed digital camera system will be installed around launch pad and launch complex tower to acquire high speed image for motion analysis of integral parts of launch vehicle during the lift-off of KSLV-II in the Naro space center. In this paper, We compared configuration of high speed digital camera system operating in the Naro space center with UHD high speed digital camera system for mission of KSLV-II.

• Current Industrial and Technological Trends in Aerospace
• /
• v.6 no.2
• /
• pp.125-132
• /
• 2008

High speed camera is very important and essential device to analyze the motion of fast moving object in detail. This paper describes the basic concepts of the high speed film camera and high speed digital camera and the history and future technical trends in high speed camera industry. In addition, application field of high speed camera in Korea as well as other countries and future plan to use high speed camera in Naro Space Center has been descried.

• The Optical Journal
• /
• s.97
• /
• pp.18-23
• /
• 2005

젊은층을 중심으로 폰카메라와 더불어 패션 아이콘으로 자리잡은 디지털카메라의 고속성장은 계속되고 있는 가운데 올해는 3~4년전 200만 화소대 이하 제품을 구매했던 소비자들의 교체수요와 맞물려 그 어느때보다 카메라 메이커간 시장 1위 다툼이 치열할 것으로 보인다. 특히 세계적으로 디카 시장이 어느정도 성숙기에 접어들면서 가격경쟁이 심화됨에 따라 결과적으로 메이커들의 수익성 문제로 불거졌고 카메라 사업을 포기하거나 사업구조를 개편하면서 수익성을 확보하려는 메이커들도 생겨나는등 시장 재편의 조짐도 보이고 있다. 이는 국내 시장에도 영향을 미쳐 올해는 그 어느때보다 메이커간 치열한 공방전과 국내 시장의 지각변동이 예상되고 있다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.1
• /
• pp.30-35
• /
• 2017

In this study, we measured the natural frequencies of aluminum honeycomb sandwich beams using digital image correlation technique. The vibration images were captured using two high speed digital cameras and the images were converted to displacements by the digital image correlation technique. Displacement data in time domain were tranformed to frequency domain data by fast Fourier transform software. To reduce noise invoked by random exitation, a spectrum averaging technique and Savitsky-Golay digital filter were adopted. A conventional vibration measurement using an accelerometer and a finite element analysis were performed to compare the results by high speed digital camera measurement method. In conclusion, new method using high speed digital cameras and digital image correlation technique can measure the vibration of beam structures and can be applied to bio-structures where sensors cannot be attached.

• The Optical Journal
• /
• v.13 no.5 s.75
• /
• pp.90-91
• /
• 2001

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.07a
• /
• pp.158-159
• /
• 2003

본 논문에서는 레이저 빔의 파면을 고속으로 정밀하게 측정하기 위한 신호처리 알고리즘을 연구하였다. 레이저 빔의 파면 정보는 Shack-Hartmann 센서 내부의 CCD 카메라에 획득되는 점영상으로부터 기울기 정보를 추출하여 구할 수 있다. 컴퓨터는 영상처리 보드를 이용하여 하트만 센서 내부의 카메라에 획득되는 영상을 양자화된 디지털 값으로 획득한 후 이를 컴퓨터 메모리에 저장한다. 하트만 센서 내부의 CCD 카메라에 촬상되는 레이저 빔 영상은 CCD 픽셀들에 의하여 이산 샘플링되고, 이 영상은 컴퓨터 내부에 장착된 영상처리 전용 보드에 의하여 양자화된 디지털 값으로 변환된다. (중략)

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.11B
• /
• pp.1283-1288
• /
• 2009

In general, a 3D computer graphic model is being used to generate a digital hologram as theinput information because the 3D information of an object can be extracted from a 3D model, easily. The 3D information of a real scene can be extracted by using a depth camera. The 3D information, point cloud, corresponding to real scene is extracted from a taken image pair, a gray texture and a depth map, by a depth camera. The extracted point cloud is used to generate a digital hologram as input information. The digital hologram is generated by using the coherent holographic stereogram, which is a fast digital hologram generation algorithm based on segmentation. The generated digital hologram using the taken image pair by a depth camera is reconstructed by the Fresnel approximation. By this method, the digital hologram corresponding to a real scene or a real object could be generated by using the fast digital hologram generation algorithm. Furthermore, experimental results are satisfactory.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.16 no.6
• /
• pp.79-84
• /
• 2012

An experiment of rapid pressurization-induced crack propagation of solid propellant was conducted by using a windowed test chamber. A pre-cracked specimen of solid propellant is installed in the chamber, and highly compressed nitrogen gas in an accumulator pressurizes the chamber until the chamber pressure reaches set-up pressure to make the chamber depressurization. Pressure-time trace was obtained from the experimental result, and pressurization rate was defined from the trace. In this study, three pressurization rates (64.34, 73.86 and 85.44 MPa/s) are considered, and propagation lengths are measured. Also, a progression of the crack propagation recorded by a high-speed digital camera is presented.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2012.05a
• /
• pp.539-544
• /
• 2012

An experiment of rapid pressurization-induced crack propagation of solid propellant was conducted by using a windowed test chamber. A pre-cracked specimen of solid propellant is installed in the chamber, and highly compressed nitrogen gas in a accumulator pressurizes the chamber until the chamber pressure reaches set-up pressure to make the chamber depressurization. Pressure-time trace was obtained from the experimental result, and pressurization rate was defined from the trace. In this study, three pressurization rates (64.34, 73.86 and 85.44 MPa/s) are considered, and propagation lengths are measured. Also, a progression of the crack propagation recorded by a high-speed digital camera is presented.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.1
• /
• pp.89-101
• /
• 2015

This paper proposes a statistical model of 3-D positions when tracking moving targets using the uncooled infrared (IR) stereo camera system. The proposed model is derived from two errors. One is the position error which is caused by the sampling pixels in the digital image. The other is the timing jitter which results from the irregular capture-timing in the infrared cameras. The capture-timing in the IR camera is measured using the jitter meter designed in this paper, and the observed jitters are statistically modeled as Gaussian distribution. This paper derives an integrated probability distribution by combining jitter error with pixel position error. The combined error is modeled as the convolution of two error distributions. To verify the proposed statistical position error model, this paper has some experiments in tracking moving objects with IR stereo camera. The 3-D positions of object are accurately measured by the trajectory scanner, and 3-D positions are also estimated by stereo matching from IR stereo camera system. According to the experiments, the positions of moving object are estimated within the statistically reliable range which is derived by convolution of two probability models of pixel position error and timing jitter respectively. It is expected that the proposed statistical model can be applied to estimate the uncertain 3-D positions of moving objects in the diverse fields.