• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.5
• /
• pp.1280-1290
• /
• 1995

In order to investigate the compression wave propagating in a high-speed railway tunnel, a numerical calculation was applied to the wave phenomenon occurring in a model tunnel. Unsteady, one-dimensional inviscid or viscous flows were solved by an explicit TVD scheme, and the calculated flows were compared with the results of measurement in real tunnels. Tunnel noises caused by emission of the compression wave were characterized in terms of excess pressure of compression wave, pressure gradient in the wave front and width of the compression wave. Calculated attenuation, pressure gradient and width of compression wave with the propagating distance agreed with the results of measurement in the real tunnels. The results also show that tunnel noises are proportional to the train velocity entering the tunnel.

• Composites Research
• /
• v.25 no.6
• /
• pp.191-197
• /
• 2012

In this paper, the penetration behavior of carbon/epoxy composite laminates subjected to high velocity projectile impact was studied by numerical simulation. The composite laminates made of carbon/epoxy with $[45/0/-45/90]_{ns}$ stacking sequence and the spherical steel impactor were three-dimensionally modeled. The ply numbers of 16 and 24 and the impact velocities in the range of 140-250 m/s were considered. The analysis was performed using an explicit finite element code LS-DYNA. The residual velocity and the amount of damage were predicted and compared to the experimental results.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.800-803
• /
• 2002

This investigation describes and analyses the experimental results proper to the penetration of Al5052-H34 alloy plates of thickness 6, 12 and 16mm(T/D＝1, 2, 3) by 5.56mm ball projectiles over the velocity range 350-750㎧. All the high velocity impact tests were carried out at normal impact angle, i.e. zero obliquity. The experimental results presented the variation of depth of penetration, bulge height and diameter, plugged length and diameter with the velocity fur tests on each plate of a given thickness in order to determine the deformation shapes of 5.56mm ball projectiles and targets. Also the protection ballistic limit($V_50$) tests were conducted.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.185-185
• /
• 2004

최근 고속 회전기계에 사용되고 있는 공기호일 베어링은 동압형 기체 베어링으로 매우 안정적이고, 보통의 저널 베어링에서 발생할 수 있는 불안정한 진동을 최소화 할 수 있는 장점을 가지고 있다. 또한 높은 안정성 및 축 자체에 자동 조절 기능을 가지고 있어서 극저온 기계 및 고속 회전기계에 널리 사용되고 있다. 이러한 고속 회전기계는 축의 기동 및 정지 시, 위험속도를 안전하게 통과하기 위해 위험속도에서의 진동을 억제하여야 하고, 운전 가능한 회전수를 증가시키기 위해서 로터 시스템의 동적 해석이 필요하다.(중략)

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.7
• /
• pp.2375-2385
• /
• 1996

As a compression wave is emitted from a duct, an impulsive wave generates and causes an impulsive noise that is at present a serious environmental noise pollution. In order to clarify the acoustic characteristics of the noise and to reduce their pressure levels, a series of model experiments were conducted on the impulsive waves emitted from an open end of a shock tube. The impulsive waves with various intensities were obtained by controlling the operation pressure ratio of the shock tube. Various kinds of silencers such as the exit boxes with baffle plates, were applied to the duct exit to reduce the impulsive noises. The effects of geometry of silencers and shock Mach number on the noise reduction were clarified. From the measurements of sound pressure level, it was found that installing the baffle plate into the exit box is effective in lowering the noise level at far fields, and that the recommendable geometries of silencer are L/D=1, H/D=1 and H/D=0.75.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.4
• /
• pp.328-336
• /
• 2008

The shock tunnel as a hypersonic ground test facility was designed, constructed and its performance test was conducted to reproduce the high speed flow which the hypersonic propulsion system is encountered. The design points were understood and the conceptual design was completed using the quasi one dimensional operation analysis code. After that, the specific performance and compartment design were completed using CFD simulation as the part analysis. The facility was then constructed according to those design results and the performance test was conducted for various operation conditions. In this paper, we suggested the compartment design method using CFD analysis, construction process and various performance test results in detail.

• Composites Research
• /
• v.22 no.2
• /
• pp.18-23
• /
• 2009

Failure of Kevlar29/Phenolic composite plate under high velocity impact of FSP(Fragment Simulation Projectile) is investigated using a non-linear explicit finite element code, LS-DYNA. Composite laminate and impactor are idealized by solid element and interface between laminas are modeled by tied-break element in LS-DYNA. Interaction between impactor and laminate is simulated face-to-face eroding contact algorithm. When the stress level meets a failure criteria, the layer in the element is eroded. Numerical results are verified by existing test results.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.62-62
• /
• 2004

최근 신소재인 선진 복합 재료 중 탄소 섬유 강화 플라스틱(이하 CFRP라고 한다. )은 비강도, 비강성이 높기 때문에 경량화가 요구되는 여러 분야, 즉 항공기, 인공위성, 원자로, 자동차 산업분야, 조선 산업분야 등 널리 사용되고 있다. 경량화가 요구되는 분야에 사용되는 구조 부재의 형상은 평판보다는 다양한 형태의 곡면 형상을 뛰는 챌(Shell)의 형상을 갖는다. 또한 이러한 구조물에 충격이 가해 졌을 때 곡면을 갖는 구조물의 충격_응답 및 파괴형태는 평판과는 다른 양상을 보인다.(중략)

• Journal of the KSME
• /
• v.34 no.10
• /
• pp.796-807
• /
• 1994

이 글에서는 고속철도 터널에서 열차에 의해 발생하는 압축파의 특성과 그의 전파거동에 관하여 기술하였다. 또 터널내에서 발생한 압축파가 터널 출구에서 충격음(미기압파)으로 방출되어 주 변의 환경에 큰 영향을 미치고 있다는 문제점을 지적하였으며, 이러한 소음의 발생 메카니즘과 소음의 저감 및 제어방법에 대하여 개괄적으로 기술하였다.

• Proceeding of EDISON Challenge
• /
• 2014.03a
• /
• pp.544-549
• /
• 2014

임계마하수보다 큰 자유흐름 마하수에서는 충격파의 발생으로 인해 급격한 항력증가가 발생하므로, 임계마하수 증가는 고속 공기역학에서 중요한 분야로 다뤄지고 있다. Whitcomb R. T.에 의해 천음속영역에서 순항할 수 있는 초임계익형이 개발되었으나, 충격파 제어 기법들에 대한 실험적인 검증은 형상 제작의 어려움으로 인해 한계를 지닌다. 따라서 본 논문에서는 2D_Comp-2.1_P와 Prandtl-Glauert 압축성 보정식을 이용하여 NACA0012와 RAE2822의 임계마하수를 해석하고, 충격파 제어 장치 중 하나인 Bump를 RAE2822에 설치하여 임계마하수를 향상시키기 위한 연구를 수행하였다. 연구 결과 충격파를 압축파로 분산시켜 충격파의 강도를 약화시키고, 양항비의 4.7% 증가를 확인하였다. 따라서 Bump를 설계한 RAE2822가 기본 익형보다 높은 천음속 조건에서 효율적인 공력특성을 가지는 것을 확인하였다.