• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.65-68
• /
• 2006

Experiments were performed to investigate the effects of mud-flap width on the aeroacoustic noise generation inside high-speed trains. The open-circuit type wind tunnel was used. The measurement setup was custom-built to simulate intercoach spacing. From the measurements, the characteristics of the turbulent flow after the intercoach spacing and consequent generation of aeroacoustic noise inside the cabin was investigated. Especially the effects of mud flap length on the characteristics of the characteristics of the turbulent flow were identified. The mechanism of noise generation by analyzed interactions with structure vibration characteristics and generation characteristics of blocked pressure was investigated.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.1449-1452
• /
• 2006

When fluid at high speed flows over an open cavity, large acoustic pressure fields inside the cavity are produced by fluid/structure interactions at the downstream end of the cavity. The inter-coach spacing is one of the most important sources of the aero-acoustic noise of a high-speed train. This noise can usually be heard as low frequency structure-borne noise inside the train. In this study experiments were performed in order to investigate the effects of mud-flap length on the aeroacoustic noise generation inside high-speed trains. Results of the measurement confirmed that the characteristics of the noise generated from the inter-coach spacing are strongly dependent on the size of the gap. Also investigated are the characteristics of the turbulent flow after the inter-coach spacing and consequent generation of the aeroacoustic noise inside the cabin.

• Proceedings of the KAIS Fall Conference
• /
• 2012.05b
• /
• pp.778-780
• /
• 2012

국내 전동차에는 슬라이딩 도어가 널리 사용되고 있으나 노이즈에 취약한 단점이 있었다. 저속 운행시에는 외부로부터 유입되는 소음이 문제가 되지 않았으나, 전동차가 고속으로 운행되면서 소음이 큰 이슈로 자리 잡게 되었다. 전동차 소음의 주요 요인은 도어시스템에서 외부로부터 유입되는 공기를 완전히 차단하지 못해서 발생하게 된다. 플러그 도어시스템은 구조상 노이즈 문제에 강한 특성을 가지고 있다. 그러나 현재 플러그 도어는 국산화가 이루어져 있지 않아 국산화를 위해 전기식 플러그 도어를 개발하여 시험을 진행 중에 있다. 본 논문에서는 개발한 전기식 플러그 도어시스템의 개발 내용 및 구성에 대해 다루고자 한다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.648-655
• /
• 2001

현재 국내에서는 신항만건설. 경부고속철도 건설, 기존고속도로 신설 및 확장공사 등 대형 국책공사와 도심지 내에서의 아파트부지조성, 고층건물신축, 우회도로, 지하차도, 지하철건설 등 중소형 공사가 증가되고 있으며 이러한 대소형 공사 시에 발생하는 건설소음ㆍ진동은 계획단계에서부터 합리적인 기준설정과 충분한 환경영향평가가 이루어져야겠으며 또한 이러한 평가결과가 공사에 잘 반영되어야 할 것이다. (중략)

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.04a
• /
• pp.188-189
• /
• 2012

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.10a
• /
• pp.314-317
• /
• 2011

• Journal of the Korean Society for Railway
• /
• v.5 no.1
• /
• pp.26-31
• /
• 2002

The more sophisticated patterns of propagation model is presented in this paper, which includes three different source characteristics (spherical, cosine and dipole). The spherical, cosine and dipole radiation characteristics compared, and sound event level and the maximum sound level are calculated by experiment and calculation. It is shown that patterns of propagation have dipole characteristics for low speed range (below about 150Km/h) at electric multiple system. We know that push-pull high speed system has cosine characteristics of noise propagation at low speed range (below about 200Km/h).

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1718-1719
• /
• 2008

본 논문에서는 철도차량의 능동조향을 위한 고전 PI 제어기 및 퍼지 제어기를 설계하여 그 성능을 서로 비교하였다. 철도차량에서 능동조향은 곡선부 주행 시 발생되는 승차감 저하 및 차륜/레일의 마모와 소음을 줄이고, 고속주행을 위한 조향성능 및 주행안정성을 확보하기 위한 제어기술이다. 논문에서는 차량 1량을 모델로 하여 측정된 휠-레일의 횡변위(Lateral Displacement) 정보를 토대로 휠의 요모멘트를 제어하는 전략을 사용하여 제어기를 설계하였으며, 시뮬레이션을 통해 제어기 응답 특성을 비교하였다.

• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.387-392
• /
• 2004

There has been an increasing demand for the noise impact assessment by the high-speed trains due to the expansion of high-speed rails. This paper provides procedures for the evaluation and the assessment of the potential noise impact resulting from proposed high-speed rails. Firstly the official specifications for the railway noise have been reviewed, and the procedures for the initial noise evaluation and the detailed noise analysis have been described.

• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.399-404
• /
• 2004

When high speed train runs on heavy curvature section of conventional line, squeal noise emitted from the railroad and wheel. This noise is very unpleasant to the near habitant. In this study, the characteristics and the countermeasures of the squeal noise of high speed train running on the conventional line was investigated.