• Journal of Navigation and Port Research
• /
• v.34 no.8
• /
• pp.623-628
• /
• 2010

High speed marine vehicle, such as semi-planing, planing craft have been developed recently. These ships paid attention to the resistance characteristics, especially in high speed region. Model test method is divided to two equipment greatly, first 'Towing tank', second 'C.W.C.'. It is difficult to estimate a resistance characteristics for high speed boat. because these are made for low speed ship. This paper suggests a new model test method and system. This is real sea model test and it's comprised of eight part. Firstly, This method is tested at C.W.C that is possible to using in real sea model tes using low speed boat modelt. And then, Real sea model test and CFD calculation are performed and compared with tow way used high speed boat model. It can be a good way to estimate a performance for high speed boat.

• Journal of the Society of Naval Architects of Korea
• /
• v.48 no.2
• /
• pp.158-164
• /
• 2011

The study on the improvement of resistance performance is very important for coastal fishing boats in Korea, because the prices of fuel oil are gradually risen and the demand of high-speed fishing boats is increased lately. This study is concerned with the improvement of the resistance performance for Korean high-speed small coastal fishing boats. A semi-planing hull form of Korean small coastal fishing boat is selected in the role of initial hull. From the modification of the hull form parameters and the local characteristics of the hull form, the improvement of the resistance performance is achieved. The resistance performances of the initial and the modified hull forms are estimated by using a numerical simulation method. Also, ship model tests are carried out in ship model basin.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2012.06a
• /
• pp.542-544
• /
• 2012

조선기술의 발달과 해운업체의 요구로 선박이 점차 고속화 대형화됨에 따라 선박의 통항량은 매년 증가하고 있으며, 해양사고의 위험도 함께 높아지고 있다. 또한 최근 들어 어선이나 예선 등 소형선도 AIS(선박자동식별장치)를 설치하면서 관제대상 선박은 날이 갈수록 증가하는 추세이다. 따라서 선박이 항만으로 진입하기 이전 단계에 해양사고의 위험을 예방하기 위하여 항만관제의 범위가 확대되어야 한다는 필요성이 제기되고 있으며, 이로 인한 관제사의 업무량 및 스트레스도 증가하는 실정이다. 그러나 현재 사용중인 관제시스템은 모두 외국 제품으로 관제사의 다양한 요구사항을 반영하기에는 어려움이 있으며, 여러 기종이 혼재해 있어 VTS 간 연계도 불가능한 실정이다. 본 연구에서는 관제장비를 통합 연동하여 관제사의 업무량을 효과적으로 감소시키고 전국 VTS 및 관련 기관 업체와 상호 유기적으로 연계할 수 있는 맞춤형 관제지원시스템의 개발에 대한 필요성 및 개념, 주요기능, 활용방안 등을 모색하여 보았다.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.44 no.1
• /
• pp.68-74
• /
• 2008

This study is concerned with the development of the basic planing hull form of small fishing boat in 25 knots high speed. A series of model test to determine the optimum performance hull form of actual fishing boat with 10 gross tonnage was carried out for 5 models made available planing hull form in the circulation water channel. Model test was performed with the resistance test to study the hydrodynamic characteristics of model ships and the sinkage and trim measurement to investigate the stability of model ships and also the wave pattern observation to analyze the effectiveness of model ships. As the result, the planing hull form of P-4 with deep V type bow can be derived as the best hull form with good performance especially in ship's resistance efficiency showing less residual resistance and sinkage and trim and the spray effect, etc..

• Journal of the KSME
• /
• v.29 no.6
• /
• pp.586-593
• /
• 1989

국내 선박용 원동기연구는 1980년대에 들어서면서부터 엔진의 성능시험평가, 요소 기술개발연구, 소형엔진의 성능개량연구 등이 연구인력확보, 연구시설 확충 및 연구기반 구축과 병행하여 진행 되고 있다. 중. 대형엔진공장을 유치하여 생산공급하기도 급급했던 초기단계에서 수요확보를 위한 노력이 절실히 요망되었고, 또 부품 국산화, 수요자 요구에 부응키 위한 자체 능력향상은 가공생 산기술축적, 설계능력향상, 수리전문 기술자 및 AS등으로 도모되어 왔다. 외국 기술도입에 의한 생산의 장점-기술도입자체 외에도 세계적인 서비스 네트워크, 상표사용, 새로운 기술의 확보 등은 한국형 엔진 개발을 위한 연구를 도외시해 왔다. 한편 소형엔진에서는 어선 근대화 사업, 어민들 의 엔진성능인식이 상향됨으로써 새로운 고성능 엔진개발이 1980년대에 활발하게 진행되어 상당 한 진전을 보여 왔으며 고속엔진개발이나 대체에너지 이용 엔진개발에도 연구가 확대되고 있다. 본 글에서는 국내 박용 원동기 연구개발동향을 소개하기 위하여 국내 박용디젤엔진 산업과 연구 배경, 개발연구 등에 대한 내용을 실적 및 진행중인 과제를 위주로 요약 소개하고자 한다.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2003.05a
• /
• pp.221-224
• /
• 2003

This study was carried out to develope a basic form of planning hull type fishing boat. G/T 10ton class is selected as object hull form, and hull form is designed in Chosun University. A series of test results of LCG variations for 5 different LCG points are presented in this paper. The test was performed in Davidson Laboratory, and the scope of tests include resistance, trim and sinkage.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2013.06a
• /
• pp.391-394
• /
• 2013

조선기술의 발달과 해운업체의 요구로 선박이 점차 고속화 대형화됨에 따라 선박의 통항량은 매년 증가하고 있으며, 해양사고의 위험도 함께 높아지고 있다. 또한 최근 들어 어선이나 예선 등 소형선도 선박자동식별장치(AIS;Automatic Identification System)를 설치하면서 관제대상 선박은 시간이 갈수록 증가하고 있으며, 이로 인한 관제사의 업무량 및 스트레스도 증가하는 실정이다. 그러나 현재 관제센터에서 관제운영을 위해 사용중인 관제시스템을 제외하고는 관제사의 업무량을 효과적으로 감소시키고 지원할 수 있는 시스템은 연구된 바가 없다. 이 연구에서는 전자해도 기반의 관제사 지원 시스템의 주요 기능 중 관제정보 데이터베이스를 구축하여 해양사고를 방지할 수 있는 관제통계분석 기능에 대한 개념, 주요기능 및 활용방안에 대하여 모색하여 보았다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.7
• /
• pp.1023-1030
• /
• 2021

Korea Maritime Safety Tribunal (KMST) statistics released in of 2019 indicated that most collision accidents involving small-size vessels with less than 20 gross-tonnage occur mainly due to operational carelessness, such as forward-looking negligence and unskilled vessel control. As an effective remedy, training and education for vessel operators are being strengthened to prevent accidents. However, collision accidents are increasing, and technical measures are continuously developed to reduce accidents caused by human factors. In this study, an avoidance algorithm and prototype of terminal-controller against collision between two nearby vessels was developed for implementation on relative navigation control by adopting WAVE telecommunication technology. Moreover, several sea trial tests were performed to verify the collision avoidance algorithm and control system using two fishing vessels for dif erent scenarios.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.9 no.2
• /
• pp.92-97
• /
• 2006

Hull forms of a high speed small boat have been developed through numerical studies. A round bilge type hull form has been drived form a using chine hull form with HCAD, a hull form variation software. Wave resistance and the flow fields around the ships have been computed using well-known software, WAVIS. This software employs Rankine source method with non-linear tree surface condition as well as dry transom boundary conditions. The round bilge hull form showed better resistance performance than to the chine hull form for the whole speed range. However, considering the building and labor costs of the small shipyard, the chine hull form has been selected and its wave resistance characteristics has been improved by modifying the bow regions and applying the stem wedge. It is found that the effect of stem wedge is quite satisfactory to improve the resistance characteristics of high speed chine hull form.

• Journal of Navigation and Port Research
• /
• v.31 no.5 s.121
• /
• pp.339-344
• /
• 2007

Shipwaves can cause beach erosion, seawall destruction and difficulty of cargo working due to rolling of ship. In addition, high speed operation of motor boat and passenger ship jeopardize sea bathers and anglers' safety. This study aims to investigate the characteristics of shipwaves which occurred and propagated in shallow water experimentally and theoretically. Shipwaves which occurred and propagated in shallow water depth represent large wave height increase.