• Journal of Advanced Navigation Technology
• /
• v.12 no.1
• /
• pp.46-53
• /
• 2008

The ITS(Intelligent Transport System) enables us to provide solutions on traffic problems, while maximizing safety and efficiency of road and transportation systems, by combining technologies from information and communication, electrical engineering, electronics, mechanics, control and instrumentation with transportation systems. The issues that an integration system for massive traffic data sources must face are due to several factors such as the variety and amount of data available, the representational heterogeneity of the data in the different sources, and the autonomy and differing capabilities of the sources. In this paper, we describe how to extract and load of the heterogeneous massive traffic data from the operational databases, such as FTMS and ARTIS using commercial tools. Also, we experiment on traffic data warehouses with integrated quality management techniques for providing high quality data.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.1A
• /
• pp.143-153
• /
• 2006

In design of bridges, estimation of actions and loadings is very important for the safety and maintenance of bridges. In general, effect of traffic loading on the bridge can be modeled as live load (including impact load) and fatigue load. For estimation of traffic loading, it is important to get reliable and comprehensive truck statistical data such as the traffic and weight information. To get statistical data, Bridge Weigh-In-Motion (BWIM), which measures the truck weights without stopping the traffic, is need to be developed. In this study, BWIM system with various functions is developed first. Then this system is used to get comprehensive truck data. Traffic loadings including fatigue and live loading are formulated from the truck data acquired from the bridges. Objectives of this study are to develop the BWIM system, to apply the system in test bridge in Highway, and to formulate the live and fatigue loading for bridge design.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.6
• /
• pp.1043-1048
• /
• 2017

Since year 2016, in Korea, the police department started to use drones to patrol violated vehicles on the highway area. They monitor vehicle drivers who use side ways on the highway during traffic congested hours of the season, drunken drivers, or violent drivers. They use the 'Spot Mobility' method which floats the drones for 30 minute period. However, this method is inefficient since it requires manually charging batteries, gathering data, and operate drones with many numbers of policeman. Therefore, in this paper, for the efficient patrol in this purpose, I have suggested an effectively manageable network system consists of many drones as the wireless network nodes and with small numbers of policeman in a wide highway area. To accomplish this, the two topologies of effective drone patrol network systems are designed and simulated in OPNET simulator for performance evaluation.

• Journal of Korean Society of Transportation
• /
• v.22 no.6
• /
• pp.77-88
• /
• 2004

This study aims at developing the model that is able to detect the compression wave, which is included as a similar situation in incidents, that causes false applicable to the similar character such as incidents in the incident detection model for expressways. In this study, it has been checked whether the number of false alarms is decreased or not by modularizing this model for being able to applicable to other models such as DES and DELOS, etc. which do not perform the compression wave test based on the compression wave test process of APID model which has been being used in the expressway traffic management system currently. The evaluation in this study focuses on the sensitivity of the model and the results analysis is performed classified by each polling cycle. And how well these models are working is evaluated by each polling cycle. In addition to this, the detection rate, the false alarm rate and the average detection time in both the existing models and the model in this study are calcuated. As a result of appling the model in this study, it is found that the false alarm rate is improved through the reasonable decrease in the number of false alarm frequencies and there are not remarkable changes concerning the detection rate and the average detection time. To sum up, it is expected that a good number of improvement effects will be occurred when this model is applied to the actual expressway traffic management system.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.1
• /
• pp.44-57
• /
• 2020

A dedicated short-range communications (DSRC) traffic information system is a detection system for a section of road using communication between roadside equipment and on-board High-Pass units to collect road traffic information and provide reliable traffic information to drivers. The Ministry of Land, Infrastructure, and Transport announced that a DSRC system must be supported to pass the performance evaluation of an intelligent transportation system (ITS), and the performance evaluation for DSRC systems installed in expressways and national highways is started. Currently, DSRC traffic information systems are only managed for maintenance and functional-monitoring purposes, which means that detailed criteria for the operation of a DSRC traffic information system, such as communication range, the direction of the antenna, and the power of the radio wave, etc., need to be established. In this paper, the criteria of the performance evaluation of a DSRC traffic information system are presented for different road types and road environments. The proposed performance evaluation criteria included the communication range and communication power of roadside equipment. In addition, installation criteria, such as the direction of the antenna, and the height and angle of the installed system, are presented for different road types and road environments. The criteria presented were evaluated for DSRC roadside equipment and documented to improve system maintenance and quality control of the communication system.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.2
• /
• pp.209-217
• /
• 2022

Lane management with a central variable lane(s) (or reversible lane) where the traffic flow is temporarily reversed in one or more lanes during peak periods has been evaluated as an effective strategy to alleviate congestion caused by tidal traffic flows. However, due to traffic safety issues, such a movable barrier system can be considered as an alternative to supplement the existing its operation facilities such as static and/or dynamic signs and special pavement markings. In addition, when combined with a bus exclusive lane strategy, its effectiveness could be greatly increased. The objective of this study is to propose a feasibility analysis procedure for operational strategies of a bus-exclusive lanes using a barrier transfer system (BTS) for urban expressways. To this end, a case study was conducted on two urban expressways on the west side of the Han River in Seoul. As a result, temporary operation during rush hour in the morning was found to be most effective. The results presented in this study are expected to serve as a basis for establishing bus-exclusive lane operation strategies using similar systems in the future.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.1D
• /
• pp.25-32
• /
• 2009

Currently, various types of TDM (Transportation Demand Management) policies are being studied and implemented in an attempt to overcome the limitations of supply oriented policies. In this context, this paper addressed issues of effectiveness and possible domestic implementation of the HOT lane. The possible site of implementation selected for this simulation study is part of the Kyung-bu freeway, where a dedicated bus lane is currently being operated. Minimum length of distance required in between interchanges and access points of the HOT lane for vehicles to safely enter and exit the lane, and traffic management policies for effectively managing the weaving traffic trying to enter and exit the HOT lane were presented. A 5.2km section of freeway from Ki-heuing IC to Suwon IC and a 8.3km section from Hak-uei JC to Pan-gyo JC have been selected as possible sites of implementation for the HOT lane, in which congestion occurs regularly due to the high level of travel demand. VISSIM simulation program has been used to analyze the effects of the HOT lane under the assumption that one-lane HOT lane has been put into operation in these sections and that the lane change rate were in between 5% to 30%. The results of each possible scenario have proven that overall travel speed on the general lanes have increased as well by 1.57~2.62km/h after the implementation of the HOT lane. It is meaningful that this study could serve as a basic reference data for possible follow-up studies on the HOT lane as one effective method of TDM policies. Considering that the bus travel rate would continue increase and assuming the improvement in travel speed on general lanes, similar case study can be implemented where gaps between buses on bus lane are available, as a possible alternative of efficient bus lane management policies.

• Journal of Korean Society of Transportation
• /
• v.31 no.4
• /
• pp.85-94
• /
• 2013

The Continuous Risk Profile (CRP) has been well known to be the most accurate and efficient among existing network screening methods. However, the classical CRP uses safety performance functions (SPFs) which require a huge investment to construct a database system. This study aims to suggest a new CRP method using average crash frequencies of homogeneous groups, instead of SPFs, as rescaling factors. Hierarchical clustering analysis is performed to classify freeway segments into homogeneous groups based on the data of AADT and number of lanes. Using the data from I-880 in California, the proposed method is compared to other several network screening methods. The results show that the proposed method decrease false positive rates while it does not produce any false negatives. The method developed in this study can be easily applied to screen freeway networks without any additional complex database systems, and contribute to the improvement of freeway safety management systems.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.2 no.1 s.2
• /
• pp.15-24
• /
• 2003

While public institutions and privite coperations have constructed the data collecting infrastructure and commercialized it to service traffic information, inaccuracy with information, insufficiency with the public sector, overapping investment and the rest are arising from the differences of data treatment, offering method, communication protocal and the like. For these reasons, we need standardization it as a national enterprise. In this paper, we would like to present the unity management and joint method of traffic information based on the present position of system construction and national ITS standardization. At first, we presented the relation between data elements and message sets and then analyzed how message sets have been used to message sets to share traffic information so far in public institutions and private coperations like Korea freeway cooperation-ITS model city-Cheonan-Nonsan expressway, In-cheon international airport expressway-Korea freeway cooperation and Seoul metropolitan police agency-Seoul metropolitan government. As the results of analyzing message sets, it had disclosed that data transmission is impossible or a system is unchangeable because data form and each items to transmission were different from each other and its own address and link IDS were not determined yet. Also it showed these message sets did not abidy by The Draft of National ITS Standards. First of all, we proposed data basic form and elements which were form by items used in each center in common and the elements to manage traffic information suggested by Standards based on the results of analyses.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.5D
• /
• pp.579-585
• /
• 2009

In spite of the proven effectiveness of ramp metering system, it has not been successfully implemented in Korean setting. The purpose of this paper is to select target locations to introduce ramp metering into the Korean expressway system. For this, domestic standards to introduce ramp metering have been presented after reviewing those of the US. The major criteria are level of service (LOS), the existence of detour route, space for queue build-up and opened ramp. 15 different locations were selected and AHP has been used to make priority among them. Intuitively, the result of priority was in accordance with the congestion and traffic volume. The core results identified in this paper is expected to be used in different cities and expressway networks elsewhere.