• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2002.11a
• /
• pp.363-369
• /
• 2002

가정 내에서의 초고속망 이용이 활성화되면서 가정 내에서의 활동은 매우 다양하고 복잡하며 그에 따른 서비스도 여러 가지 형태가 존재한다. 외부 인터넷망과 연동되는 홈 네트워크의 개념이 생기기 전부터 흠 오토메이션, 홈시큐리티 등의 서비스를 제공하기 위한 고립적인 형태의 망과 서비스 제공 시스템이 있었다. 월드 와이드 웹 서비스를 기본으로 한 인터넷의 폭발적인 활성화와 고속 인터넷망의 확산에 따라 가정 내에서 제공되는 서비스를 인터넷과 연계시키려는 시도가 보편화되었고 가정 내에서 사용되는 독립적인 기기들을 인터넷에 연결하여, 외부의 정보를 이용해서 활용하거나, 가전내의 기기들을 외부에서 액세스할 수 있게 되었다. 이렇게 하여 보다 풍부한 서비스를 제공하고, 사용상의 시간적인 제약을 완화할 수 있다. 예들 들어 인터넷상에서 조리법을 전송받아 전자레인지를 작동할 수 있으며, 외부에서 잘못 켜둔 가스밸브를 잠글 수도 있다. 가정 내에서 wrhd되던 이러한 서비스들은 서로 다른 하드웨어와 통신방법을 사용하고 있어, 이러한 서비스를 통합하여 운영, 관리할 수 있도록 하는 흠 서버의 개념이 대두되었다. 외부 인터넷 망과 연계된 흠 오토메이션, 홈 시큐리티등을 제공할 수 있는 기반이 마련되었고, 가정 내에서 독립적으로 제공되던 서비스들을 단일 홈 서버를 통해서 관리하려는 시도가 진행되었다. 그러나 홈 서버는 개발하는 업체의 보유기술에 따라 중심기능은 약간씩 차이를 보이고 있다. 홈 서버 응용 영역은 전문 지식을 소유한 인력과의 연계가 필요하고, 다양한 서비스 영역 행위가 아주 복잡하기 때문에 이들을 연결해 주는 자치 시스템을 필요로 한다. 또한 홈 서버 서비스 영역에서 정보는 각 영역 전문가가 가진 지식의 전달을 필요로 하기 때문에, 지식을 주고받는 멀티 에이전트의 시스템의 활용 영역으로 적당하다. 멀티 에이전트 시스템은 분산된 환경에서 에이전트간에 에이전트 통신 언어를 사용해서 대화를 하기도 하고, 상호 협력하는 에이전트들로 구성된 시스템을 뜻하며 흠 서버처럼 동적이고 고도의 자치성을 요구하는 영역에 적당하다. 멀티 에이전트 플랫폼으로는 FIPA(Foundation for Intelligent Physical Agents)가 제시한 에이전트 표준 플랫폼이 1997년부터 2000년에 이르기까지, 계속적으로 변화, 발전하고 있다. 본 연구는 FIPA에서 제시하는 플랫폼을 기반으로 홈 서버에 정보가전을 제어하는 에이전트를 두고 외부에서 다른 에이전트가 홈 서버에 위치하는 에이전트와의 통신을 통하기 정보가전을 지능적으로 제어하도록 하였다. 정보가전 에이전트는 가정 내 가전제품을 외부에서 제어하기 위한 에이전트이다. 단순한 관리가 아닌 에이전트로 하여금 지능적으로 가전제품 관리를 하게 한다. 정보가전 에이전트는 홈 서버에서 작동하는 에이전트와 PDA에서 작동하는 에이전트로 구성된다. 정보가전 에이전트는 전력량, 수도 사용량 제어와 가전제품 제어 기능과 보안 관련 서비스를 제공한다. 두 에이전트는 FIPA에서 정의된 규격에 맞게 만들어지기 때문에 FIPA명세서를 따르는 다른 에이전트와 자유로운 통신이 가능하다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.3
• /
• pp.130-139
• /
• 2016

A frequency of earthquake occurrence in the Republic of Korea is increasing over the past few decades. In this situation, an importance of earthquake prevention comes to the fore because the earthquake does damage to structures and causes severe damage of human life. For the earthquake prevention, a real-time vibration measurement for structures is important. As an example, the United States of America and Japan have already been monitoring real-time earthquake acceleration for the important structures and the measured acceleration data has been managed by forming database. This database could be used for revising the seismic design specifications or predicting the damage caused by earthquake. In Korea, Earthquake Recovery Plans Act and Enforcement Regulations are revised and declared lately. Ministry of Public Safety and Security is constructing a integrated management system for the measured earthquake acceleration data. The purpose of this research is to develop a real-time vibration monitoring and analysis system for structures which links to the integrated management system. The developed system contains not only a monitoring function to show real-time acceleration data but also an analysis system to perform fast fourier transform, to obtain natural frequency and earthquake magnitude, to show response spectrum and power spectrum, and to evaluate structural health. Additionally, this system is designed to be able to link to the integrated management system of Ministry of Public Safety and Security. It is concluded that the developed system can be useful to build a safety management network, minimize maintenance cost of structures, and prevention of the structural damage due to earthquake.

• Journal of the Institute of Convergence Signal Processing
• /
• v.19 no.3
• /
• pp.125-132
• /
• 2018

KVN(Korean VLBI Network) introduced the Mark6 system of the MIT haystack observatory as a recorder for data recording up to 32 Gbps for VLBI(Very Long Baseline Interferometry) observation. The Mark6 recorder can record data at up to 32Gbps when two systems and 64 HDDs are installed. However, because of the unique recording method that is characteristic of Mark6, we are introducing a large amount of data into a virtual file system, or using a general RAID method, which causes data loss when reading and transferring files at the highest recording speed or file system have. The Flexbuff system, a software recorder developed by JIVE(Joint Institute for VLBI ERIC), can be configured to operate as a data recorder through RAID configuration and network upgrades. In particular, when installed in the Mark6 system, it can record VLBI data at a maximum speed of 32 Gbps with less loss of data compared to the existing Mark6 by utilizing Mark6 resources well. In this paper, we propose that the existing Mark6 system can be operated as Mark6-Flexbuff by installing jive5ab software, and it is verified through experiment that it can be effectively used for VLBI observation operation through data recording test.

• The Journal of the Korea Contents Association
• /
• v.11 no.3
• /
• pp.26-35
• /
• 2011

In these days, internet environment are very quickly development as well on-line service have been using a online for the mission critical business around the world. As the amount of information to be processed by computers has recently been increased there has been cluster computing systems developed by connecting workstations server using high speed networks for high availability. but cluster computing technology are limited for a lot of IT resources. So, grid computing is an expanded technology of distributed computing technology to use low-cost and high-performance computing power in various fields. Although the purpose of Grid computing focuses on large-scale resource sharing, innovative applications, and in some case, high-performance orientation, it has been used as conventional distributed computing environment like clustered computer until now because grid middleware does not have common sharable information system. In order to use grid computing environment efficiently which consists of various grid middleware, it is necessary to have application-independent information system which can share information description and services, and expand them easily. This paper proposed new database architecture and load balancing for high availability through Grid technology.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.7
• /
• pp.22-31
• /
• 2008

Cognitive radio should imply a proper sensing technique for detecting the presence of licensed users to identify the unused spectrum holes. Besides this, this information should also be used to opportunistically provide communication among secondary users. At the same time the performance of the primary user should not be declined by the secondary users. The detection of licensed users may be significantly difficult for shadowing effect. To prevail over this problem cooperative spectrum sensing, In which the combined observation information gained by multiple secondary users is employed to achieve higher performance of detection, has been inspected. However, the primary challenge of cooperative sensing lays in its ability to detect the presence of licensed user quickly and accurately. In this paper, we have used UltraWideBand (UWB) to detect the presence of licensed users and transmit the sensing information among the nodes of the network. UWB has the capability of transmitting data at a very high rate. It is unique in co-existence capability with narrow band systems. Here, we have shown that the detection probability of licensed user is improved by means of transmitting the spectrum sensing information via UWB. We also have analyzed the throughput of the proposed technique and compared the result with existing sensing method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.1
• /
• pp.152-164
• /
• 2015

A rapid development of semiconductors, sensors and mobile network technologies has enable that the embedded device includes high sensitivity sensors, wireless communication modules and a video processing module for vehicular environment, and many researchers have been actively studying the smart car technology combined on the high performance embedded devices. The vehicle is increased as the development of society, and the risk of accidents is increasing gradually. Thus, the advanced driver assistance system providing the vehicular status and the surrounding environment of the vehicle to the driver using various sensor data is actively studied. In this paper, we design and implement the smart vehicular camera device providing the V2X communication and gathering environment information. And we studied the method to create the metadata from a received video data and sensor data using video analysis algorithm. In addition, we invent S-ROI, D-ROI methods that set a region of interest in a video frame to improve calculation performance. We performed the performance evaluation for two ROI methods. As the result, we confirmed the video processing speed that S-ROI is 3.0 times and D-ROI is 4.8 times better than a full frame analysis.

• Environmental and Resource Economics Review
• /
• v.27 no.3
• /
• pp.569-611
• /
• 2018

Rapid economic growth, urbanization, and industrialization of China have tremendously degraded the overall quality of living environments, especially the air quality, not only negatively affecting Chinese people but also impacting citizens of neighboring countries, namely Korea. The Chinese government has invested much effort to regulate the air pollution due to burning coal through introducing strict environmental monitoring policies and aggressive implementation. This paper presents an overview of Chinese air pollution prevention policy due to burning coal, and the associated trends and specifics of institutional arrangements regarding air pollutant emission regulations. It turns out that the policies have become stricter than before; some polices are geared towards enforcing extra regulation at the regional level. It is expected that the regulation will become stricter in the future. However, the actual contribution and feasibility of such policies must be analyzed based on sound science. The policies seem to care little about influencing the air quality of Korea, and this has to be improved. In order to do so, it is important to strengthen environmental cooperation between Korea and China, and better yet to research on not only the air quality but also the associated fields, such as energy, industrial technology, and global environmental governance.

• Journal of KIISE:Computing Practices and Letters
• /
• v.8 no.5
• /
• pp.583-589
• /
• 2002

The Internet is absolutely contributed to information telecommunication revolution nowadays. Realizing local network at the various type of buildings such as a company and a university, ethernet is used for subnet and FDDI, ATM are used for backbone mainly in order to get internet services. Processing TCP/IP protocol suite and analyzing the protocol exactly is essential to detecting the problem occurring in the network and developing communication equipment. This paper presents implementation of ethernet LAN protocol analyser which monitors and simulates ICP/IP protocol suite carrying the Internet and non-Internet protocol such as Netware and NetBIOS. MS window98 and visual C are used for development environment and application program operates on the NDIS firmware. The performance analysis on the proposed system is carried out as monitoring and simulating the traffic over LAN of a university. In the result of monitoring the system, the processing time of a packet captured over the LAN is about 1.5ms. In case of simulating the system, the processing time to be taken carrying out TCP connection and disconnection once is packet is about 8.6ms. The performance analysis of monitoring and simulation results satisfies with 10 Mbps ethernet LAN environment.

• The KIPS Transactions:PartD
• /
• v.12D no.5 s.101
• /
• pp.699-708
• /
• 2005

It becomes easy and generalized to track the cellular phone users and vehicles according to the Progress of wireless telecommunication, the spread of network, and the miniaturization of terminal devices. It has been constantly studied to provide location based services to furnish suitable services depending on the positions of customers. Various vehicle tracking and management systems are developed to utilize and manage the vehicle locations to relieve the congestion of traffic and to smooth transportation. However the designed previous work can not evaluated in real world, because most of previous work is only designed not implemented and it is developed for simple model to handle a point, a line, a polygon object. Therefore, we design a moving object query language and implement a vehicle management system to search the positions and trajectories of vehicles and to analyze the cost of transportation effectively. The designed query language based on a SQL can be utilized to get the trajectories between two specific places, the departure time, the arrival time of vehicles, and the predicted uncertainty positions, etc. In addition, the proposed moving object query language for managing transportation vehicles is useful to analyze the cost of trajectories in a variety of moving object management system containing transportation.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.2
• /
• pp.211-218
• /
• 2014

Recently, software-based programmable logic controller (PLC) systems, which are implemented in standard PLC languages on general hardware, are gaining popularity because they overcome the limitations of classical hardware PLC systems. Another noticeable trend is that the use of integrated development environment (IDE) is becoming important. IDEs can help developers to easily manage the growing complexity of modern control systems. Furthermore, industrial Ethernet, e.g. EtherCAT, is becoming widely accepted as a replacement for conventional fieldbuses in the distributed control domain because it offers favorable features such as short transmission delay, high bandwidth, and low cost. In this paper, we implemented the extension of open source IDE, called Beremiz, for developing EtherCAT-based real-time, synchronized motion control applications. We validated the EtherCAT system management features and the real-time responsiveness of the control function by using commercial EtherCAT drives and evaluation boards.