• KIPS Transactions on Computer and Communication Systems
• /
• v.9 no.9
• /
• pp.197-206
• /
• 2020

Collaborative research in science applications based on HPC service needs rapid transfers of massive data between research colleagues over wide area network. With regard to this requirement, researches on enhancing data transfer performance between major superfacilities in the U.S. have been conducted recently. In this paper, we deploy multiple data transfer nodes(DTNs) over high-speed science networks in order to move rapidly large amounts of data in the parallel filesystem of KISTI's Nurion supercomputer, and perform transfer experiments between endpoints with approximately 130ms round trip time. We have shown the results of transfer throughput in different size file sets and compared them. In addition, it has been confirmed that the DTN cluster with three nodes can provide about 1.8 and 2.7 times higher transfer throughput than a single node in two types of concurrency and parallelism settings.

• The KIPS Transactions:PartC
• /
• v.9C no.1
• /
• pp.65-72
• /
• 2002

In this paper, we implement a high-speed swatch tilth the function for label integration to enhance the expansion of networks using the label space of routers efficiently on MPLS over ATM networks. We propose an appropriate hardware structure to support the VC-merge function and differentiated services simultaneously. In this paper, we use the adaptive congestion control method such as EPD algorithm in carte that there is a possibility of network congestion in output buffers of each core LSR. In addition, we justify the validity of the proposed VC-merge method through simulation and comparison to conventional Non VC-merge methods. The proposed VC-merge capable switch is modeled in VHDL. synthesized, and fabricated using the SAMSUNG 0.5um SOG process.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.7
• /
• pp.1601-1607
• /
• 2009

As a general rule, the orthogonal modulation scheme which is widely used for wireless communications is not appropriate for the high speed data transmission applications due to the low bandwidth efficiency. Therefore, to increase the bandwidth efficiency of the conventional orthogonal modulation, we propose the multi-code trans-(bi-)orthogonal modulation in this paper. It is the combined scheme of multi-code modulation and trans-orthogonal modulation. We can know that the bandwidth efficiency of the proposed scheme is better than that of the conventional orthogonal modulation. Additionally, the receiver complexity of the proposed scheme is lower than that of the conventional orthogonal modulation. The proposed scheme can be used for the physical layer of the high speed wireless digital data transmission applications such as multimedia communications system and high speed personal area networks.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.246-248
• /
• 2021

Recently data has been transformed into a data economy and society that acts as a catalyst for the development of all industries and the creation of new value, and COVID-19 is accelerating digital transformation. In the upcoming intelligent Internet of Things era, the availability of decentralized systems such as blockchain and mixnet is emerging to solve the security problems of centralized systems that makes it difficult to utilize data safely and efficiently. Blockchain manages data in a transparent and decentralized manner and guarantees the reliability and integrity of the data through agreements between participants, but the transparency of the data threatens the privacy of users. On the other hand, mixed net technology for protecting privacy protects privacy in distributed networks, but due to inefficient power consumption efficiency and processing speed issues, low cost, light weight, low power consumption Internet Hard to use. In this paper, we analyze the limitations of conventional mixed-net technology and propose a mixed-net technology method for low power consumption, high speed, and the Internet of things.

• Journal of KIISE:Computer Systems and Theory
• /
• v.30 no.1
• /
• pp.33-49
• /
• 2003

Recently, there have been large storage demands for manipulating multimedia data. To solve the tremendous storage demands, one of the major researches is the SAN(Storage Area Network) that provides the local file requests directly from shared-disk storage and also eliminates the server bottlenecks to performance and availability. SAN also improve the network latency and bandwidth through new channel interface like FC(Fibre Channel). But to manipulate the efficient storage network like SAN, traditional local file system and distributed file system are not adaptable and also are lack of researches in terms of a metadata structure for large-scale inode object such as file and directory. In this paper, we describe the architecture and design issues of our shared-disk file system and provide the efficient bitmap for providing the well-formed block allocation in each host, extent-based semi flat structure for storing large-scale file data, and two-phase directory structure of using Extendible Hashing. Also we describe a detailed algorithm for implementing the file system's device driver in Linux Kernel and compare our file system with the general file system like EXT2 and shard disk file system like GFS in terms of file creation, directory creation and I/O rate.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.11
• /
• pp.44-52
• /
• 2011

In this article, we present a QoS-guaranteed IP mobility management scheme of Internet service for fast moving vehicles with multiple wireless network interfaces. The idea of the proposed mechanism consists of two things. One is that new wireless connections are established to available wireless channels whenever the measured data rate at the vehicle equipped with mobile gateway drops below to the required data rate of the user requirement. The other is that parallel distribution packet tunnels between an access router and the mobile gateway are dynamically constructed using multiple wireless network interfaces in order to guarantee the required data rate during the mobile gateway's movement. By doing these methods, the required data rate of the mobile gateway can be preserved while eliminating the possible delay and packet loss during handover operation, thus resulting in the guaranteed QoS. The architecture of the IETF standard HMIPv6 has been extended to realize the proposed scheme, and detailed algorithms for the extension of HMIPv6 has been designed. Finally, simulation has been done for performance evaluation, and the simulation results show that the proposed mechanism demonstrates guaranteed QoS during the handover with regard to the handover delay, packet loss and throughput.

• Journal of KIISE:Computing Practices and Letters
• /
• v.14 no.9
• /
• pp.916-920
• /
• 2008

The personal workspace consists of user- specified computing environment such as user profile, applications and their configurations, and user data. Mobile computing devices (i.e., cellular phones, PDAs, laptop computers, and Ultra Mobile PC) are getting smaller and lighter to provide personal work-space ubiquitously. However, various personal work-space mobility solutions (c.f. VMWare Pocket ACE[1], Mojopac[2], u-PC[3], etc.) are appeared with the advance of virtualization technology and portable storage technology. The personal workspace can be loaded at public PC using above solutions. Especially, we proposed a framework called ubiquitous personal computing environment (u-PC) that supports mobility of personal workspace based on wireless iSCSI network storage in our previous work. However, previous u-PC could support limited applications, because it uses IRP (I/O Request Packet) forwarding technique at filter driver level on Windows operating system. In this paper, we implement OS-level virtualization technology using system call hooking on Windows operating system. It supports personal workspace mobility and covers previous u-PC limitation. Also, it overcomes personal workspace loading overhead that is limitation of other solutions (i.e., VMWare Pocket ACE, Mojopac, etc). We implement a prototype consisting of Windows XP-based host PC and Linux-based mobile device connected via WiNET protocol of UWB. We leverage several use~case models of our framework for proving its usability.

• Journal of Korean Society of Transportation
• /
• v.33 no.1
• /
• pp.50-60
• /
• 2015

Pedestrians not only walk along roads, but also pass through buildings or across open spaces. This study defines these unusual walk routes as social path. Social path is an informal pedestrian route that is not considered in a pedestrian network, even though it should be regarded as pedestrian route considering the fact that many people actually use this path. In response, current study related to travel behavior cannot evaluate properly due to lack of consideration for realistic travel behavior such as social path. In order to deal with this situation, this study analyzes the effect of social path at two complex centers in Seoul. Evaluation indices are service area analysis and urban network analysis which is one of the spatial network analysis. In particular, we subdivide the network into three steps by the level of network building and analyze each step. As a result, it is revealed that step three which includes social path shows the greatest improvement in pedestrian accessibility. In this regard, we confirm that social path should be considered when evaluating pedestrian accessibility in further studies. Furthermore, a lot of undervalued facilities will be re-appraised in the field of travel behavior.

• Journal of KIISE:Computing Practices and Letters
• /
• v.14 no.4
• /
• pp.369-377
• /
• 2008

Today, Ethernet technology is rapidly developing to have a bandwidth of 10Gbps beyond 1Gbps. In such high-speed networks, the existing method that host CPU processes TCP/IP in the operating system causes numerous overheads. As a result of the overheads, user applications cannot get the enough computing power from the host CPU. To solve this problem, the TCP/IP Offload Engine(TOE) technology was emerged. TOE is a specialized NIC which processes the TCP/IP instead of the host CPU. In this paper, we implemented a high-performance, lightweight TCP/IP(HL-TCP) for the TOE and applied it to an embedded system. The HL-TCP supports existing fundamental TCP/IP functions; flow control, congestion control, retransmission, delayed ACK, processing out-of-order packets. And it was implemented to utilize Ethernet MAC's hardware features such as TCP segmentation offload(TSO), checksum offload(CSO) and interrupt coalescing. Also we eliminated the copy overhead from the host memory to the NIC memory when sending data and we implemented an efficient DMA mechanism for the TCP retransmission. The TOE using the HL-TCP has the CPU utilization of less than 6% and the bandwidth of 453Mbps.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.12
• /
• pp.91-97
• /
• 2000

With the brilliant development of information communication and the rapid spread of internet, current network communication is carrying several up-to-date functions such as electronic commerce, activation of electro currency or electronic signature and will produce more advanced services in the future. Information communication network such as that electronic commerce would demand the more safe and transparent guard of network, and anticipate the more fast performance of network. In this paper, in order to meet the several demands, DES(data encryption standard) with parallel feistel structure, which feistel structure of the basic structure of DES is transformed into in parallel, is proposed. The existing feistel structure can't use pipeline method for the structural problem of DES itself-the propagation of error. therefore, this modified parallel feistel structure could improve largely the performance of DES which had to have the trade-off relation between data processing speed and data security and in addition a method proposed in SEED having adopted the modified parallel feistel structure shows more excellent secure function and/or fast processing ability. The used CAD Tool use Synopsys Ver. 1999. 10 in both of synthesis and simulation.