• Analytical Science and Technology
• /
• v.23 no.3
• /
• pp.261-268
• /
• 2010

This study was performed to evaluate the PCBs-containing wastes using official test method. Ninety samples of transformer oil and various solid waste were collected to assess the analytical results. In the analysis of PCBs-containing wastes, the PCBs levels were detected in the range of 7.6 mg/kg to 23.8 mg/kg for transformer oils, $0.02\sim0.54\;{\mu}g/100cm^2$ for plat solid wastes, and 0.01~0.071 mg/kg for amorphous solid waste. In the cupper wire waste of the transformer with oil concentration level of 23 mg/kg, the analytical result exceed PCBs regulation level of 0.04 mg/kg. The new proposed analytical method for PCBs containing waste can be forced to effective management of the wastes.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.717-720
• /
• 2007

The 3 ton/day-scale pilot plant consists of compressor, feed channel, fixed bed type gasification & melting furnace, quench scrubber, demister, flare stack and gas engine. Syngas composition of gasification using the 35.50(waste I), 4.34%(wasteII) moisture-containing solid waste showed waste I CO 25-35%, 20-40% hydrogen, waste II 25-35%, 20-30% hydrogen. Gasification melting furnace was operated $1,500{\sim}1,600^{\cdot}C$. Gas engine was generated $35{\sim}40$ kW as waste gasification syngas.

• Analytical Science and Technology
• /
• v.22 no.6
• /
• pp.471-479
• /
• 2009

This study was performed to improve the analytical methods and re-establish the regulatory standard of PCBs-containing solid wastes for sufficient management in which has been concerned internationally. To do this, the sampling, pre-treatment and quantification methods which were used in USA and Japan were discussed. It was thought properly that new standard of PCBs-containing solid wastes was established through correlation with PCBs concentration of transformer oil. The surface wipe sampling was selected in the nonporous materials and cutting sampling in the porous materials. In the absence of transformer oils, electrical equipment is PCB-contaminated if it has PCBs at ${\geq}0.4{\mu}g/100cm^2$ as measured by a wipe test of a nonporous surface and if it has at 0.04 mg/L as measured by cutting test of a porous material. Also, new analytical methods for PCBs containing solid waste were proposed.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.633-636
• /
• 2007

국내에서 발생되는 폐기물을 이용하여 가스화에 의해 생산되는 합성가스의 생산 및 활용기술에 대해 고찰하였다. 폐기물 가스화에 의해 생산되는 합성가스의 조성은 CO, $H_2$를 주성분으로 하며 부분산화 조건에 $CO_2$가 함께 생산된다. 생산된 합성가스는 CO $20{\sim}35$%, $H_{2}$ $20{\sim}35$% 정도의 조성으로 나타나며 발생량은 $1,365{\sim}2,125$ $Nm^3/hr$로 나타났다. 이러한 합성가스는 스팀생산, 전력생산 및 DME, SNG, 메탄올, 수소와 같은 고부가가치의 화학원료를 생산할 수 있다.

• Resources Recycling
• /
• v.14 no.1
• /
• pp.39-46
• /
• 2005

A solid-state high power torch with inter-electrode insert (IEI) was developed to treat solid waste (for example, incinerated ash), and it's operation characteristics were obtained in the plasma facility test for waste treatment. According to torch test from this study, at the non-transferred mode voltage is increased by gas volume proportionally, and at the transferred mode it is not affected to voltage change. Especially arc voltage is sustained stable at the range of 10% of total Fe in slag. In addition, Electrical conductivity is 0.05~0.25${\Omega}^{-1}cm^{-1}$, torch efficiency is 75~85% and Erosion rate is 2${\times}10^{-6}~6{\times}10^{-6}$ kg/s.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.475-478
• /
• 2008

The 3 ton/day-scale pilot plant consists of waste press, feed channel, fixed bed type gasification & melting furnace, quench scrubber, syngas refinery facility and flare stack. $H_2$/CO ratio of gasification syngas using the solid waste and sludge in the 3 ton/day gasifier showed about 1. Gasification melting furnace was operated $1,300{\sim}1,600^{\circ}C$. $H_2$/CO ration control system was obtained $H_2$/CO ratio 2 and 3.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.8 no.1
• /
• pp.49-56
• /
• 2010

In the pyroprocessing of spent nuclear fuels, LiCl-KCl waste salt containing radioactive rare earth chlorides are generated. The radioactive rare earth oxides are recovered by co-oxidative precipitation of rare earth elements. The powder phase of rare eath oxide waste must be immobilized to produce a monolithic wasteform suitable for storage and ultimate disposal. The immobilization of these waste developed in this study involves a solid state sintering of the waste with host borosilicate glass and zinc titanate based ceramic matrix(ZIT). And the rare-earth monazite which synthesised by reaction of ammonium di-hydrogen phosphate with the rare earth oxides waste, were immobilzed with the borosilicate glass. It is shown that the developed ZIT ceramic wasteform is highly resistant the leaching process, high density and thermal conductivity.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.20 no.2
• /
• pp.20-23
• /
• 2012

본 연구는 유기성폐기물을 처리하고 그것을 이용하여 고체연료 또는 퇴비를 생산하는 종합시스템에 관한 것이다. 유기성폐기물은 90% 전후의 높은 함수율을 나타내고 있기 때문에 처리에 중점을 두어야 할 부분이 수분 처리 방법이다. 따라서 기존의 처리방법으로는 고액분리하여 처리 후 하천에 방류하는 시스템에 의해 처리되고 있다. 하지만 본 연구에서는 기술개발의 차별화 및 선행기술의 회피 전략을 위해, 유기성폐기물의 수분을 건조시키는 방법으로 미생물이 유기성폐기물의 유기물을 분해하여 발생 되는 $80^{\circ}C$ 이상의 열에너지에 의해 수분을 제거하는 발열반응을 적용하여 수분을 제거하는 무방류시스 템이다. 뿐만 아니라 고체연료의 발열량을 높이기 위해서 무연탄, 코크스, 기름 등의 열량보조제를 첨 가하는 대신에 유기성폐기물을 첨가 한 후 적당한 발열반응 및 건조시켜 고체연료를 제조하는 방법으 로 4,000kcal/kg 이상의 높은 발열량을 얻을 수 있으며 불완전연소 등에 의한 2차 오염을 방지할 수 있는 기술이다. 따라서 친환경 미생물 발열반응에 의해 유기성폐기물을 저렴한 비용으로 액상 및 고상 을 동시에 처리 할 수 있으며, 고체연료를 제조할 수 있는 새로운 신기술이다.

• Proceedings of the Mineralogical Society of Korea Conference
• /
• 2000.10a
• /
• pp.31-42
• /
• 2000

1. 선진국의 경우 한 사업체에서 광산-가공산업체-연구소를 운영하는 시스템으로서 제품규제부터 시작하여 계속적인 용도개발이 가능하다. 2. 한국의 벤토나이트 광업 및 가공산업체의 현황이 일본의 5분의 1규모이며 년간 생산량 및 수요량이 100,000톤 규모로서 세계 15위권에 해당된다. 3. 벤토나이트 광업의 영세화로 효율적이고 장기적인 개발이 되지 못한다. 4. 광량의 고갈 및 개발 침체로 수입량이 증대되고 있다. 5. 새로운 용도개발이 요구된다. 특히 최근 증대되는 cat litter용, 흡착제용등 우선 개발이 용이한 용도개발을 추진해야 하며 다음으로 방사성 폐기물 처분장 liner 및 brick용, 폐수처리용 유기-벤토나이트, 쓰레기매립장 liner용과 화장품용등의 부가가치를 향상시킬 수 있는 용도개발이 시급하다고 본다.

• Economic and Environmental Geology
• /
• v.54 no.5
• /
• pp.605-613
• /
• 2021

When crushing rocks to produce aggregates, solid stone dust or sludge is generated as a by-product. These by-products are classified as waste and are not utilized, and most of them are disposed of landfills. This by-product differs in mineral composition, chemical composition, and physical properties depending on the rock type and aggregate production process. Therefore, if a technology that can make good use of the inherent physical or chemical properties of by-products is developed, economic and environmental benefits can be achieved instead of disposal. In this study, stone dust and sludge were collected from domestic aggregate producers and physical and chemical properties were investigated by performing XRD mineral analysis, particle size analysis, and chemical analysis. In addition, the research trend was identified through a domestic and international research case studies on the use of stone powder and sludge.