• Korean Chemical Engineering Research
• /
• v.50 no.4
• /
• pp.684-689
• /
• 2012

Poly(acrylic acid) (PAA) microspheres is one of the widely-used polymeric materials for the bio-field application and the electric materials. For the synthesis of PAA microspheres, the polymerization technique using surfactants is applied. After the synthesis, the purification and separation processes are required for the removal of surfactant. When general organic solvents were used, many problems, such as huge amount of waste solvent, additional separation processes, and the possibility of residual media, were occurred. Thus, High-pressure Soxhlet extraction using liquid $CO_2$ was developed to solve these problems. In this study, High-pressure Soxhlet extraction of the synthesized PAA microspheres using liquid $CO_2$ was conducted for the removal of Monasil PCA which is used for the dispersion polymerization of acrylic acid in compressed liquid Dimethyl ether (DME). The morphology of the extracted PAA particles was checked by field emission scanning electron microscopy (FE-SEM) and the residual concentration of Monasil PCA was analyzed by inductively coupled plasma - Optical Emission Spectrometer (ICP-OES). For studying the effect of the solvent effect, Soxhlet extraction was conducted using n-hexane, liquid DME, and liquid $CO_2$. In case of n-hexane, some extracted PAA microspheres were produced. However, deformation was also occurred due to the high thermal energy of n-hexane vapor. Liquid DME could not remove Monasil PCA. When using liquid $CO_2$, the extracted PAA microspheres which were free for the residual solvent were produced without deformation. For finding the optimum operating condition, high-pressure Soxhlet extraction was conducted for 8 hours with changing the temperature of reboiler and condenser. When the extractor temperature is $19.6{\pm}0.2^{\circ}C$ and the pressure is $51.5{\pm}0.5$ bar, the best removal efficiency was obtained.

• Microbiology and Biotechnology Letters
• /
• v.37 no.2
• /
• pp.160-169
• /
• 2009

Poly-$\gamma$-glutamic acid ($\gamma$-PGA) was mixed natural flora of Bacillus subtilis, contaminated from cooked soybeans. Also, it was performed to find out the antiallergic activity by using NC/Nga mice, in vitro. The $\gamma$-PGA (PGA-HM : PGA-high molecular weight), Molecular weight 300 kDa, was decomposed and made PGA-LM (PGA-low molecular weight) which has molecular weight below 30 kDa by sonication. Therefore, it was same result between PGA-HM and PGA-LM, and reported PGA-LM as basic result. We found that PGA-LM contains antiallergic efficacy that inhibit B cells and Th2 cells activation from isolated CD4+T cells in NC/Nga atopic dermatitis model mice, and not show a cytotoxicity in the hFCs. To investigate the effects of these PGA-LM in vitro, isolation of splenic B cell and CD4+ T cells in atopic dermatitis mice were used. To elucidate the role of PGA-LM in anti-CD40+ interleukin-4 (IL-4)-mediated B-cell activation, showed that the capacity of B cells to expression IL-$1\beta$, IL-6, and TNF-$\alpha$ mRNA down-regulated, and IL-10 mRNA up-regulation by PGA-LM treatment, but it had no effect on TGF-$\beta$ expression. In addition to CD4+IFN-$\gamma$+ and CD4+CD25+foxp3+, the functions of PGA-LM in the development of the CD4+CD25+foxp3+ and CD4+IFN-$\gamma$+cells, the phenotype and functions of PGA-LM induced CD4+CD25+foxp3+, and CD4+IFN-$\gamma$+cells in CD4+T cells. These results suggested that PGA-LM could change cytokine production and generate CD4+CD25+foxp3+ Tregs in NC/Nga mice, and may be effective for immunotherapy in patients with AD.

• Journal of Life Science
• /
• v.26 no.5
• /
• pp.545-554
• /
• 2016

Hyaluronic acid (HA) is an important macromolecule in medical and pharmaceutical fields. HA is a natural and linear polymer composed of repeating disaccharide units of β-1, 3-N-acetyl glucosamine and β-1, 4-glucuronic acid. This work aimed to confirm the structural characteristics and anti-inflammatory activities of HA and its chemically sulfated-HA. HA was produced from a fed-batch fermentation process using Streptococcus dysgalactiae in a 5 l bioreactor. HA was isolated water-soluble form (HA-WS) and water-insoluble form (HA-WI) from culture medium, and was obtained chemically sulfated-derivative (S-HA) that resulted in a 90% yield from HA-WI. The structural features of the sulfated- HA (S-HA) were investigated by FT-IR and ¹H-NMR spectroscopy. The FT-IR and NMR patterns revealed the similarity in both the FTIR spectrum as well as NMR spectrum of both reference standard and purified HA from S. dysgalactiae. The anti-inflammatory activities of HA and S-HA were examined on LPS-induced RAW 264.7 cells. S-HA was significantly inhibited production of pro-inflammatory mediators such as nitric oxide (NO) and PGE₂ and the gene levels of iNOS and COX-2, which are responsible for the production of NO and PGE₂, respectively. Furthermore, S-HA also suppressed the overproduction of pro-inflammatory cytokine TNF-α (<80 pg/ml) and IL-6 (<100 pg/ml) compared to that of HA-WI. The present study clearly demonstrates that HA-S exhibits anti-inflammatory activities in RAW 264.7 macrophage cells.

• Asian Journal of Turfgrass Science
• /
• v.26 no.1
• /
• pp.24-34
• /
• 2012

The study was carried out to investigate the effects of polymer, calcium, perlite and chitosan on the growth of perennial ryegrass (Lolium perenne L., PR) and to provide a basic information needed for their practical application when establishing garden, parks, athletic field and golf courses with these materials. A total of 24 treatment combinations were applied in the study. Treatments were made of water-swelling polymer (WSP), calcium, perlite and chitosan mixed in soil organic amendment (SOA). Germination rate, turfgrass coverage, turfgrass density and top growth were evaluated in PR under greenhouse conditions. Significant differences were observed for these growth characteristics among the treatments. Turfgrass density and plant height, evaluated on a weekly basis, varied with time after seeding. A proper mixing rate of WSP was considered to be lower 3% for the growth of PR with an exception of being below 6% for turfgrass density. Germination rate and early survival capacity were greatly influenced by calcium and chitosan among the elements of calcium, perlite, and chitosan. But there was little effect by perlite. Calcium and chitosan were most effective one for turfgrass density and coverage, respectively. Top leaf-growth was influenced by all three elements, but the greatest effect was highly linked with calcium. Chitosan was very effective in early germination and vertical leaf growth, as compared with the others. Future studies are required for measuring the effect of WSP, calcium, perlite and chitosan on the turf growth characteristics in root zone mixtures of sand+SOA before a practical field use.

• Korean Journal of Weed Science
• /
• v.30 no.4
• /
• pp.340-360
• /
• 2010

The depletion of fossil fuels, ecological problems associated with $CO_2$ emissions climate change, growing world population, and future energy supplies are forcing the development of alternative resources for energy (heat and electricity), transport fuels and chemicals: the replacement of fossil resources with $CO_2$ neutral biomass. Several options exist to cover energy supplies of the future, including solar, wind, and water power; however, chemical carbon source can get from biomass only. When used in combination with environmental friend production and processing technology, the use of biomass can be seen as a sustainable alternative to conventional chemical feedstocks. The biorefinery concept is analogous to today's petroleum refinery, which produce multiple fuels and chemical products from petroleum. A biorefinery is a facility that integrates biomass conversion processes and equipment to produce fuels, power, and value-added chemicals from biomass. Biorefinery is the co-production of a spectrum of bio-based products (food, feed, materials, and chemicals) and energy (fuels, power, and heat) from biomass [definition IEA Bioenergy Task 42]. By producing multiple products, a biorefinery takes advantage of the various components in biomass and their intermediates therefore maximizing the value derived from the biomass feedstocks. A biorefinery could, for example, produce one or several low-volume, but high-value, chemical or nutraceutical products and a low-value, but high-volume liquid transportation fuel such as biodiesel or bioethanol. Future biorefinery may play a major role in producing chemicals and materials as a bridge between agriculture and chemistry that are traditionally produced from petroleum. Industrial biotechnology is expected to significantly complement or replace the current petroleum-based industry and to play an important role.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.8
• /
• pp.1087-1096
• /
• 2010

This study was conducted to investigate the physiological activity of extracts of fresh mushrooms. The components were extracted by hot water; subsequently, the hot-water extract was subjected to 60% ethanol precipitation to yield high-molecular-weight (HMW) and low-molecular-weight (LMW) fractions. Total polyphenol contents, $\beta$-glucan contents, electron-donating ability (EDA), superoxide dismutase (SOD)-like activity, nitrite-scavenging activity, fibrinolytic activity, nitric oxide (NO) production, and inhibition of NO production of the mushroom extracts were measured using lipopolysaccharide (LPS)-stimulated murine macrophages, RAW 264.7 cells. The extracts of Lentinus edodes (Berk.) Singer and Pleurotus ostreatus (Fr.) Kummer contained the highest levels of $\beta$-glucan (33.5% and 25.57%, respectively). Further, the LMW fractions of the Phellinus linteus contained the highest levels of polyphenols (233.23 mg/g). The EDA of LMW fractions (10 mg/mL) of the Phellinus linteus and Agaricus bisporus were 80.74% and 51.35%, respectively. Further, SOD-like activities of the LMW fractions were high as compared to those of the HMW fractions. Nitrite-scavenging activities of the LMW fractions (pH 1.2; concentration, 10 mg/mL) of the Phellinus linteus and Pleurotus ostreatus (Fr.) Kummer were 75.95% and 41.05%, respectively. The fibrinolytic activity of the LMW fractions of all mushrooms showed no enzyme activity by fibrin plate assay. The fibrinolytic activity of the extracts of Tricholoma matsutake was the greatest inhibitory activity at 60.4%. Further study revealed that the mushroom extracts exhibited anti-inflammatory effects on RAW 264.7 cells. The LMW fraction ($500\;{\mu}g/mL$) of the Phellinus linteus considerably inhibited NO production (100%).

• Journal of Life Science
• /
• v.25 no.2
• /
• pp.237-242
• /
• 2015

The use of calcite-forming bacteria (CFB) in crack remediation and durability improvements in construction materials creates a permanent and environmentally-friendly material. Therefore, research into this type of application is stimulating interdisciplinary studies between microbiology and architectural engineering. However, the mechanisms giving rise to these materials are dependent on calcite precipitation by the metabolism of the CFB, which raises concerns about possible hazards to cement-based construction due to microbial metabolic acid production. The aim of this study was to determine target microorganisms that possibly can have bio-corrosive effects on cement mortar and to assess multi-functional CFBs for their safe application to cement structures. The chalky test was first used to evaluate the $CaCO_3$ solubilization feature of construction sites by fungi, yeast, bacterial strains. Not all bacterial strains are able to solubilize $CaCO_3$, but C. sphaerospermum KNUC253 or P. prolifica KNUC263 showed $CaCO_3$ solubilization activity. Therefore, these two strains were identified as target microorganisms that require control in cement structures. The registered patented strains Bacillus aryabhatti KNUC205, Arthrobacter nicotianae KNUC2100, B. thuringiensis KNUC2103 and Stenotrophomonas maltophilia KNUC2106, reported as multifunctional CFB (fungal growth inhibition, crack remediation, and water permeability reduction of cement surfaces) and isolated from Dokdo or construction site were unable to solubilize $CaCO_3$. Notably, B. aryabhatti KNUC205 and A. nicotianae KNUC2100 could not hydrolyze cellulose or protein, which can be the major constituent macromolecules of internal materials for buildings. These results show that several reported multi-functional CFB can be applied to cement structures or diverse building environments without corrosive or bio-deteriorative risks.

• Food Science of Animal Resources
• /
• v.32 no.2
• /
• pp.234-240
• /
• 2012

This study was conducted to examine the effects of low molecular weight gelatin hydrolysates (GH, less than 3kDa), extracted from pig skin collagen on the bone metabolism of ovariectomized (OVX) rats. The rats in the experimental groups were randomly segregated into six different treatment groups such as 1) NC, the normal rat fed AIN 93 diet (basal diet) only; 2) OC, the OVX rat fed the basal diet only; 3) GH 0.1, the OVX rat fed the basal diet with 0.1% GH; 4) GH 0.8, the OVX rat fed the basal diet with 0.8% GH; 5) G 0.1, the OVX rat fed the basal diet with 0.1% gelatin; 6) G 0.8, the OVX rat fed the basal diet with 0.8% gelatin. Body weight gain in the GH 0.1, GH 0.8, and G 0.8 was significantly higher than those in the NC and OC. Feed intake of the GH 0.1 and GH 0.8 was higher than that of the NC and OC, while no significant difference was found in feed efficiency ratio (FER). BMD of the GH 0.8 was higher than that of the OC. However, gelatin hydrolysates and gelatin resulted in higher BMC level compare to the OC. Serum HDL-cholesterol of rat fed GH and gelatin was higher than that of OC (p<0.05). LDL-C of the GH 0.1 and the GH 0.8 tended to be less than that of OC. Serum alkaline phosphatase (ALP) of the GH 0.1 was lower than that of the OC. The serum of GH 0.8 showed lower osteocalcin value than the OC (p<0.05). In addition, GOT and GPT levels significantly decreased in all treatment groups. These results indicated that gelatin hydrolysates from pig skin gelatin hydrolysates enhanced BMD and serum biochemical parameters related to bone metabolism. Therefore, the gelatin hydrolysates could be used as a beneficial material to improve bone health.

• Journal of the Korean Electrochemical Society
• /
• v.24 no.3
• /
• pp.65-75
• /
• 2021

Coin cell is a basic testing platform for battery research, discovering new materials and concepts, and contributing to fundamental research on next-generation batteries. Li metal batteries (LMBs) are promising since a high energy density (~500 Wh kg^-1) is deliverable far beyond Li-ion. However, Li dendrite-triggered volume fluctuation and high surface cause severe deterioration of performance. Given that such drawbacks are strongly dependent on the cell parameters and structure, such as the amount of electrolyte, Li thickness, and internal pressure, reliable Li metal coin cell testing is challenging. For the LMB-specialized coin cell testing platform, this study suggests the optimal coin cell structure that secures performance and reproducibility of LMBs under stringent conditions, such as lean electrolyte, high mass loading of NMC cathode, and thinner Li use. By controlling the cathode/anode (C/A) area ratio closer to 1.0, the inactive space was minimized, mitigating the cell degradation. The quantification and imaging of inner cell pressure elucidated that the uniformity of the pressure is a crucial matter to improving performance reliability. The LMB coin cells exhibit better cycling retention and reproducibility under higher (0.6 MPa → 2.13 MPa) and uniform (standard deviation: 0.43 → 0.16) stack pressure through the changes in internal parts and introducing a flexible polymer (PDMS) film.

• Clean Technology
• /
• v.30 no.1
• /
• pp.37-46
• /
• 2024

Environmental problems caused by plastic waste have been continuously growing around the world, and plastic waste is increasing even faster after COVID-19. In particular, PP and PE account for more than half of all plastic production, and the amount of waste from these two materials is at a serious level. As a result, researchers are searching for an alternative method to plastic recycling, and plastic pyrolysis is one such alternative. In this paper, a numerical study was conducted on the pyrolysis behavior of non-condensable gas to predict the chemical reaction behavior of the pyrolysis gas. Based on gas products estimated from preceding literature, the behavior of non-condensable gas was analyzed according to temperature and residence time. Numerical analysis showed that as the temperature and residence time increased, the production of H₂ and heavy hydrocarbons increased through the conversion of the non-condensable gas, and at the same time, the CH₄ and C₆H₆ species decreased by participating in the reaction. In addition, analysis of the production rate showed that the decomposition reaction of C₂H₄ was the dominant reaction for H₂ generation. Also, it was found that more H₂ was produced by PE with higher C₂H₄ contents. As a future work, an experiment is needed to confirm how to increase the conversion rate of H₂ and carbon in plastics through the various operating conditions derived from this study's numerical analysis results.