• 수도
• /
• s.69
• /
• pp.59-73
• /
• 1994

• 수도
• /
• v.23 no.1_2 s.76_77
• /
• pp.38-49
• /
• 1996

• Environmental engineer
• /
• s.106
• /
• pp.22-27
• /
• 1995

• Korean Chemical Engineering Research
• /
• v.52 no.4
• /
• pp.503-515
• /
• 2014

A lot of existing wastewater treatment plants (WWTPs) are rebuilt or retrofitted for advanced wastewater treatment processes to cope with reinforced effluent criteria of nitrogen and phosphorous. Moreover, how to treat the wasted sludge from WWTPs has been also issued since the discharge of the wasted sludge into ocean is impossible from 2011 due to the London Convention 97 protocol. These trend changes of WWTPs get a motivation to assess environmental and economic impacts from the construction stage to the waste stage in WWTPs. Therefore, this study focuses on evaluation of environmental and economic impacts of the advanced wastewater treatment processes and waste sludge treatment process by using life cycle assessment. Four advanced wastewater treatment processes of Anaerobic/Anoxic/Oxic ($A_2O$), 5 stages-Bamard Denitrification Phosphate (Bardenpho), Virginia Initiative Plant (VIP), and Modified University of Cape Town (MUCT) are chosen to compare the conventional activated sludge (CAS) and three waste sludge treatment methods of land fill, incineration, and composting are used. To evaluate environmental and economic impacts of each advanced wastewater treatment processes, life cycle assessment (LCA) and life cycle cost (LCC) are conducted based on International organization for standardization (ISO) guidelines. The results clearly represent that the $A_2O$ process with composting shows 52% reduction in the environmental impact than the CAS process with landfill. On the other hand, the MUCT process with composting is able to save 62% of the life cycle cost comparing with the CAS process with landfill. This result suggested the qualitative and quantitative criteria for evaluating eco-environmental and economic technologies of advanced treatment processes and also sludge treatment method, where their main influence factors on environmental and economic impacts are analyzed, respectively. The proposed method could be useful for selecting the most efficient and eco-friendly wastewater treatment process and sludge treatment method when retrofitting the existing WWTPs to advanced treatments.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.4
• /
• pp.68-75
• /
• 2018

The introduction of advanced water treatment facilities has increased as the conventional purification method cannot remove the substance clearly. However, the internal waterproofing and Anticorrosion materials of the advanced water treatment facility using ozone deteriorate due to the oxidation power of ozone and affects the concrete, which causes a decrease in durability. This study is to evaluate the ozone resistance according to the type of spray metal and the surface treatment method of the coating, and the bond strength after ozone treatment in order to develope a finishing method to prevent deterioration of concrete structure of water treatment facility using metal spraying method as a way to construct metal panel with excellent ozone resistance and chemical resistance by an easier way than the previous. The Experimental results show that spray metal Ti has superior ozone resistance even after spraying. It is considered to be the most suitable method for ozone resistance and bond performance by finishing using Teflon sealing as surface treatment method.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2004.04a
• /
• pp.235-238
• /
• 2004

유류 오염토양에 대한 과산화수소의 화학적 고도산화에 대한 실험실 및 현장 적용 가능성을 타진하였다. 현장 오염토양 10g에 각각 과산화수소(34.5%) 원액을 중량비로 0.3%, 0.6%, 1.0%, 2.0%를 처리하여 혼합 후 실험실에서 1일 반응 후 TPH 농도를 분석하였다. 분석결과 토양 대비 2.0%의 과산화수소를 투입한 처리구에서 가장 높은 복원 효율을 측정할 수 있었고 2.0%까지의 투입농도에서 미생물의 농도 변화는 측정되지 않았다. 오염된 토양에 과산화수소를 오염 토양 중량 대비 2%를 분무기로 살포 후 로타리가 설치된 경작 장비로 뒤집기 수행하여 1일 후 오염토양의 오염농도를 분석한 결과 초기 TPH 5,365ppm의 농도가 2,317ppm으로 56.8% 복원된 것을 확인할 수 있었다.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2001.05a
• /
• pp.178-180
• /
• 2001

본 혐기성 반응기와 호기성 반응기를 사용하여 염색폐수를 처리 할 경우 HRT 24~30시간의 경우 색도는 방류수 수질기준을 만족시킬 수 있으나 외관상 색도를 띄며, COD의 경우 배출수 허용기준을 만족시키기 어려우므로 전처리나 후처리로써 응집. 침전 공정, 오존 및 UV와 같은 고도산화공정이 필요하다고 사료되었다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.2
• /
• pp.322-330
• /
• 1994

SIBs(Service Independent Building block) are defined in CCITT advanced intelligent network concept model for supporting various services in the future. This paper describes the protocol modeling and verification for basic call process SIB. For modeling, we use Petri Net and verify this modeling by analyzing reachability tree of Petri Net. Results of this paper should be used for design and implementation of basic call process SIB.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• fall
• /
• pp.9-12
• /
• 2021

드론 Photogrammetry는 높은 기술적 활용가치가 있는 기술로서, 결과물로 생성하는 3D 디지털 공간정보 모델이 시설물의 비육안 안전점검 및 진단에 활용될 수 있을 뿐만 아니라 디지털 트윈 구축을 위한 가장 기초적이고 핵심적인 수치 데이터를 제공하기 때문이다. 본 연구에서는 드론 Photogrammetry의 적정 품질을 구현하기 위한 임무비행의 다양한 영향인자에 대해 고찰하였다. K-water연구원 누수탐사실습장을 대상으로 드론 사진 촬영 시 비행고도, 비행속도, 중첩도, 카메라 Pitch각의 영향에 대해 연구를 수행하였다. 본 연구에서 비행시간에 영향을 미치는 인자로서 비행고도, 중첩도, 비행속도의 순으로 중요도가 있음을 알 수 있었다. 드론 임무 비행 시 후처리 결과에 가장 큰 영향을 미치는 인자는 중첩도로 나타났다. 중첩도 60% 임무비행은 3D 모델의 geometry 왜곡이 큰 편으로 나타났다. 비행 고도는 GSD (Ground Sampling Distance)와 직접 연계되므로 중요하며, 낮은 고도일수록 높은 품질의 모델링이 가능하다. April Tag를 통한 지상기준점 자동 패턴 인식 기능은 후처리 과정에서 시간 절약이 가능하여 유용하였다. 비행속도에 의한 결과물의 품질은 큰 차이가 없었으나, 수직 구조물의 모서리 부분에 다소 차이가 있었다. 짐벌 Pitch각도에 의한 정사영상 품질의 차이는 크지 않았으나 수직구조물과 평면적 구조물에 따라 각기 다른 촬영각도를 적용하는 것이 바람직하다. 본 연구성과는 향후 보다 다양한 환경에서의 데이터 수집을 통해 최적 디지털 현실 모델링에 기여할 것으로 판단된다.

• Korean Journal of Ecology and Environment
• /
• v.39 no.4 s.118
• /
• pp.489-497
• /
• 2006

The feasibility of the Natural and Ecological Wastewater treatment System (NEWS) was examined for rural wastewater treatment in Korea. The intermittent trickling biofilter with high hydrophilic filter media was used for pretreatment for suspended solids and organic pollutants. The subsequent constructed wetland with porous granule materials was used for promoting nutrient removal. The results show that the removal efficiencies of the system were high with respect to the water quality parameters except COD. Even if the effluent from the biofilter did not meet the guidelines for wastewater treatment plant effluent in Korea in terms of $BOD_5$ and TN, the final effluent of the system meets the guidelines us to good performance of the constructed wetland. The regression analysis between pollutant loading rate and removal rate indicated that the system could have stable removal for SS, $BOD_5$, TN, and TP in the given influent ranges. The analysis in the winter period indicated that the wetland covered with transparent polycarbonate glass had the statble performance during the winter period dus to increase of temperature inside the wetland without any heating system. With the stable performance, effective poilutant removal, low maintenance, and cost-effectiveness, the NEWS could be considered as an alternative treatment system for decentralized regions and rural communities in Korea.