• Journal of Advanced Navigation Technology
• /
• v.16 no.5
• /
• pp.839-845
• /
• 2012

This paper deals with the design and development of the remote control and measurement systems by Embedded Web Server. The remote control and measurement systems are implemented by Cortex M-3 ARM micro-controller. The user application software for the control and measurement system user, and the firmware software of device drivers for peripherals such as a digital input/output device, AD/DAC(Analog to Digital/Digital to Analog Converter), LCD, and temperature/humidity sensor are developed in Eclipse environment using Codesourcery C, Java script, and HTML. The experimental result of the proposed control and measurement systems implemented in this paper is evaluated via real-time experiments, which works well as designed.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.48 no.3
• /
• pp.245-254
• /
• 2021

The aim of this study was to evaluate the accuracy of 3 different automatic landmark identification programs on lateral cephalgrams and the clinical acceptability in pediatric dentistry. Sixty digital cephalometric radiographs of 7 to 12 years old healthy children were randomly selected. Fourteen landmarks were chosen for assessment and the mean of 3 measurements of each landmark by a single examiner was defined as the baseline landmarks. The mean difference between an automatically identified landmark and the baseline landmark was measured for each landmark on each image. The total mean difference of 3 automatic programs compared to the baseline landmarks were 2.53 ± 1.63 mm. Errors among 3 programs were not significantly different for 12 of 14 landmarks except Orbitale and Gonion. The automatic landmark identification programs showed significant higher mean detection errors than the manual method. The programs couldn't be used as the 1st tool to replace human examiners. But considering short consuming time, these results indicate that all 3 programs have sufficient validity to be used in pediatric dental clinic.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.16 no.5
• /
• pp.471-485
• /
• 2014

The monitoring method of geotechnical structures using acoustic emission(AE) and microseismicity(MS) is to detect the microscopic deformation and fracture behavior in the inner structures by measuring induced acoustics and vibrations. It can identify a pre-indication of failure by taking advantage of the characteristics that the amount and occurrence rates of AE and MS increase rapidly prior to large scale destruction of the target structures. The monitoring system consisting of high-quality sensors, high-speed data acquisition device and the operation program is required for the practical application of this method. Recently, the AE and MS monitoring systems have been localized. In particular, the developed operation software which can analyze and interpret the measured signals was demonstrated through a number of applications to domestic fields. This report introduces the configuration and features of developed monitoring system, then the challenges and future direction of AE monitoring in geotechnical structures are discussed.

• Journal of the Korea Society for Simulation
• /
• v.15 no.1
• /
• pp.11-17
• /
• 2006

This paper shows a case study of designing a PLC logic simulator that was developed to simulate and verify PLC control programs for nuclear plant systems. The nuclear control system requires strict restrictions rather than normal process control system does, as it works with a high-risky and dangerous nuclear plant. One is that it should assure the safeness of the control programs by exploiting severe testing. The other restriction is that the control programs should be executed fast enough such that they could control multi devices concurrently in real-time. To cope with these restrictions, we devised a logic compiler which generates C-code programs from given PLC logic programs. Once the logic program was translated into C-code, the program could be analyzed by conventional software analysis tools and could be used to construct a fast logic simulator after cross-compiling, in fact, that is a kind of compiled-code simulator.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.19-19
• /
• 2023

최근 기후변화에 의해 단기간에 많은 양의 집중호우가 발생하여 도시지역의 침수 피해가 증가하고 있다. 이에 도시지역의 홍수 피해 해결을 위해 도심지 홍수 발생 시 홍수정도 및 상황을 파악할 수 있는 장비가 개발되었으나, 실용화 단계까지는 진행이 미흡한 상황이다. 또한 기존 도시지역 홍수 현상 및 원인을 분석하기 위해 수치모형을 활용하고 있으나, 우수관망의 노후화 및 초기 강우패턴 적용에 대한 정확한 해석결과의 어려워 활용성이 낮다. 또한 홍수정도와 발생상황 인지를 위한 계측 장비의 개발 연구는 지속적으로 진행되고 있으나, 계측 장비의 높은 가격으로 전국적으로 설치 할 수 없는 상황으로 이를 대응하기 위한 별도의 방안 마련이 필요한 실정이다. 이를 위해 본 과제에서는 고성능·저비용 계측센서를 개발하여 실용화 가능성을 높이고, 전국에 산재되어있는 CCTV(교통상황, 방법용 등)의 영상을 활용한 침수상황 인지 기술 개발, 계측 데이터와 모니터링 데이터의 활용을 위한 빅데이터 개방 플랫폼을 구축하여, 상습 침수지역에 대해 실시간 감시가 가능한 계측 시스템의 정형 데이터와 CCTV 및 영상 등 모니터링 장비의 비정형 데이터의 분석 기술을 결합한 새로운 도심지 홍수 감시 기술의 개발을 목표로 한다. 이를 위해 본 연구 1차년도에 지표면 침수심 계측센서와 우수관망 월류심 계측센서를 개발하였으며, 2차년도에는개발된 계측센서의 현장실증을 통해 데이터를 수집한다. 수집된 계측센서 데이터와 비정형(CCTV 영상) 데이터의 AI학습을 통해 분석된 침수심, 침수범위, 침수면적 데이터는 도심지 홍수 정보 프로그램을 통해 표출되며, 최종적으로는 현장 상황을 쉽게 파악 가능한 3D 레이어의 형식으로 표출하고자 한다. 추후 도심지 홍수 정보 프로그램을 통해 표출되는 3D 레이어는 환경부가 추진하는 DT(Digital Twin) 연계 인공지능(AI) 홍수예보 사업과의 연계 시 도심지 홍수 지도 구축을 위한 자료로 활용될 수 있을 것으로 판단된다.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2005.11a
• /
• pp.93-101
• /
• 2005

본 논문에서는 원전 계측제어시스템 구축을 위해 개발된 원전용 PLC 시뮬레이터의 설계 사항에 관해 소개한다. 원전용 계측제어시스템은 원전이라는 특수한 환경과 제약으로 말미암아, 일반적인 시뮬레이터 개발보다 엄격한 요건을 만족해야 한다. 이러한 요건에는 다양한 테스팅을 통하여 제어 프로그램의 안정성을 보장할 수 있어야 하며, 다수의 계측제어 프로그램들을 고속으로 동시에 실행할 수 있어야 한다. 본 논문에서는 이러한 문제점들을 극복하고자 PLC 제어 프로그램의 컴파일러를 제작하고, Compiled-Code 시뮬레이션 기법을 적용하여 고속으로 실행할 수 있는 시뮬레이터 생성 방안을 고안해 내었다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.4
• /
• pp.60-68
• /
• 2003

In this study, a steady state performance analysis program was developed for a turbofan engine, and its performance was analyzed at installed conditions. For the purpose of evaluation, the developed program was compared with the performance data provided by the engine manufacturer. It was confirmed that the developed program was reliable because the results by the developed program were well agreed with those by the engine manufacturer within 3.5%. The non-linear GPA(Gas Path Analysis) program for performance diagnostics were developed, and selection of optimal measurement variables was studied. Furthermore, in order to investigate effects of the number and the kind of measurement variables, the non-linear GPA was analyzed with various measurement sets. Finally, the measurement parameters selected in the previous step were applied to the fault detection analysis of the 2-spool separate flow type turbofan engine.

• Journal of Internet Computing and Services
• /
• v.12 no.5
• /
• pp.63-72
• /
• 2011

Binary translation is a kind of the emulation method which converts a binary code compiled on the particular instruction set architecture to the new binary code that can be run on another one. It has been mostly used for migrating legacy systems to new architecture. In recent, binary translation is used for instrumenting programs without modifying source code, because it enables inserting additional codes dynamically, For general application, there already exists some instrumentation software using binary translation, such as dynamic binary analyzers and virtual machine monitors. On the other hand, in order to be benefited from binary translation in kernel-level, a few issues, which include system performance, memory management, privileged instructions, and synchronization, should be treated. These matters are derived from the structure of the kernel, and the difference between the kernel and user-level application. In this paper, we present a scheme to apply binary translation and dynamic instrumentation on kernel. We implement it on Linux kernel and demonstrate that kernel-level binary translation adds an insignificant overhead to performance of the system.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.10a
• /
• pp.676-678
• /
• 2004

최근 계측장비 기술의 발전으로 계측장비의 정보를 공유하기 위한 제어기술은 매우 중요해지고 있다. 이와 관련하여 임베디드 시스템을 이용한 다양한 디바이스 설계 기술들이 연구되고 있다. 본 논문은 계측장비 제어를 위해 Text LCD 및 Keypad와 같은 임베디드 디바이스를 장착한 시스템을 설계하였고, 임베디드 시스템의 분석을 통하여 계측장비 설계에 최적화된 시스템을 연구한다. 또한 Ethernet상의 다른 시스템에서 클라이언트 프로그램을 통해 계측장비로부터 측정된 간을 확인할 수 있다.

• Journal of Korea Multimedia Society
• /
• v.11 no.10
• /
• pp.1366-1375
• /
• 2008

To verify correct operation of measuring instruments, we request the verification of measuring instrument to the agency that holds inspection devices. This works requires time and cost to the company. For this reason. We proposed "Smart Network Interface Card Model" for remote control of measuring instruments. Our model based on Web adapter, can add, delete and change the program to an existing web adapter from remote system. Furthermore, more than one program can be loaded, and can be updated from the remote system of internet. And also we can change the verification requirement of measuring instrument, hence it makes more good quality and competitive power of instruments.