• Journal of Korean Ophthalmic Optics Society
• /
• v.16 no.4
• /
• pp.417-423
• /
• 2011

Purpose: This study was to investigate that near gradient AC/A ratio could be used to prescribe a patient with distance exophoria, we compared the difference between distance gradient AC/A ratio and near gradient AC/A ratio. Also, this thesis was to understand the relationship between calculated AC/A ratio and gradient AC/A ratio. Methods: Objective and subjective refractive error were corrected and we used Howell (3 m) chart for distance phoria tests and Howell-Kim (40 cm) chart for near phoria tests. The near gradient AC/A ratio and calculated AC/A ratio were used by Howell-Kim (40 cm) combined with +1.00 D, -1.00 D, +2.00 D and -2.00 D. Results: The average value of distance exophoria was 1.17${\pm}$1.17 $\Delta$, and the average value of near exophoria was 3.71${\pm}$2.80 $\Delta$ (t-test. p<0.001). The correlation of distance phoria with near phoria was little higher (r = 0.59, p < 0.001). Gradient AC/A ratios depending on measuring distance and stimulus were higher (r = 0.11~0.53. P < 0.001), when distance was shorter and stimulus to accommodation was more. Also, stimulus to accommodation by plus lens was higher than stimulus to accommodation by minus lens (paired t-test. p < 0.001). There was negative correlation between calculated AC/A ratio and gradient AC/A ratio. As the calculated AC/A ratio was higher, gradient AC/A ratio was lesser. Near gradient AC/A ratio was slightly higher than distance gradient AC/A ratio. Distance and near gradient AC/A ratio taken through the subjective -1.00 D were 1.30 $\Delta$/D and 1.68 $\Delta$/D(t-test. t=1.67, p < 0.001). Conclusions: There is negative correlation between calculated AC/A ratio and gradient AC/A ratio. Also, there is subtle difference between near gradient AC/A ratio and distance gradient AC/A ratio. Therefore, we need to measure distance gradient AC/A ratio when a practitioner prescribe glasses for a patient with distance exophoria.

• Proceedings of the Optical Society of Korea Conference
• /
• 2004.02a
• /
• pp.182-183
• /
• 2004

• Journal of the Korea Convergence Society
• /
• v.8 no.3
• /
• pp.123-131
• /
• 2017

This study is to find the weaknesses in drug dose calculations of nursing students by analyzing their general characteristics, confidence(C), performances in classes(PC) and exam sheets of drug dose calculations. The data were analyzed using SPSS 19.0. There was no significant difference between male and female students in simple calculation ability(SCA), but male students' mean scores were higher in applied calculation ability(ACA) and accuracy on calculation(AC). There were no significant differences in calculation abilities according to high school departments. And students were weak in questions which are needed ACA. The explanation rate of C on PC and PC on AC were 4.2% and 3.2% respectively, so there were weak positive effects from C to PC, and PC to AC. This study suggests that there is a need to develop and implement an intervention program according to students' abilities to increase AC, C, and PC by studying math on an ongoing basis. This study needs to be cautious in generalizing, because the data set was limited to nursing students from one university.

• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.38-39
• /
• 2011

본 논문은 PWM DC-AC 인버터에서의 AC 필터 인덕터 코아 손실 계산을 위한 간단한 방법을 제시한다. 코아 손실 분석을 위해서 AC 필터 인덕터로 아몰퍼스 C-Core (AMCC-320)를 선택하였다. 단상하프브릿지 전압형 인버터와 간이 열량계를 이용하여 코아 손실을 측정하고 제시한 방법을 검증하였다. 기본적으로 인버터 스위칭은 SPWM 방법을 사용하였으며, 스위칭 주파수와 모듈레이션 인덱스를 가변하면서 실제 제작한 간이 열량계로 코아 손실을 측정하였다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.8 no.2
• /
• pp.173-179
• /
• 2003

In this paper, a novel on-line dc capacitance estimation method for the three-phase PWM converter is proposed. At no load, input current at a low frequency is injected, which causes dc voltage ripple. With the at voltage and current ripple components of the dc side, the capacitance can be calculated. Experimental result shows that the estimation error is less than 2%.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.1
• /
• pp.13-21
• /
• 2019

The content based on image retrieval makes use of features of information within image such as color, texture and share for Retrieval data. we present a novel approach for improving retrieval accuracy based on DCT Filter-Bank. First, we perform DCT on a given image, and generate a Filter-Bank using the DCT coefficients for each color channel. In this step, DC and the limited number of AC coefficients are used. Next, a feature vector is obtained from the histogram of the quantized DC coefficients. Then, AC coefficients in the Filter-Bank are separated into three main groups indicating horizontal, vertical, and diagonal edge directions, respectively, according to their spatial-frequency properties. Each directional group creates its histogram after employing Otsu binarization technique. Finally, we project each histogram on the horizontal and vertical axes, and generate a feature vector for each group. The computed DC and AC feature vectors bins are concatenated, and it is used in the similarity checking procedure. We experimented using 1,000 databases, and as a result, this approach outperformed the old retrieval method which used color information.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.4
• /
• pp.669-676
• /
• 2007

This paper presents a new power flow method to analyze the AC electric railway system effectively in both cases of traction and regenerative braking of the trains. The algorithm to easily solve the power flow of the AC electric railway system with the trains of regenerative braking from the system without a train of regenerative braking is derived. Using this new power flow method, the voltage characteristics of a typical AC electric railway system is easily analyzed in both cases of traction and regenerative braking of the trains. We show that the presented method can be applied effectively in order to analyze the AT-fed AC electric railway system in both cases of traction and regenerative braking of the trains. A STATCOM(Static Synchronous Compensator) is applied to the system in order to improve the voltage drop problem and this case is also analyzed to show the effect of STATCOM.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.1215-1218
• /
• 1998

본 논문은 Digital Audio Compression(AC-3) Standard 인 A-52를 기반으로 하였으며 Borland C++3.1 Compiler를 사용하여 AC-3 Decoding Algorithm 구현하였다. Input Stream은 DVD VOB File에서 AC-3 Stream만을 분리하여 사용하며 최종 출력은 16 Bit PCM File이다. AC-3의 Frame구조는 Synchronization Information, Bit Stream Information, Audio Block, Auxiliary Data, Error Check로 구성된다. Aduio Block 은 모두 6개의 Block으로 나뉘어져 있다. BSI와 Side Information을 참조하여 Exponent를 추출하여 Exponent Strategy에 따라 Exponent를 복원한다. 복원된 Exponent 정보를 이용하여 Bit Allocation을 수행하여 각각의 Mantissa에 할당된 Bit수를 계산하고 Stream으로부터 Mantissa를 추출한다. Coupling Parameter를 참조하ㅕ Coupling Channel을 Original Channel로 복원시킨다. Stereo Mode에 대해서는 Rematrixing을 수행한다. Dynamic Range는 Mantissa와 Exponent의 Magnitude를 바꾸는 것으로 선택적으로 사용할 수 있다. Mantissa와 Exponent를 결합하여 Floating Point coefficient로 만든 후 Inverse Transform을 수행하면 PCM Data를 얻을 수 있다. PC에서 듣기 위해서는 Multi Channel을 Stereo나 Mono로 Downmix를 수행한다. 이렇게 만들어진 PCM data는 PCM Data를 재생하는 프로그램으로 재생할 수 있다.

• Journal of Korea Multimedia Society
• /
• v.1 no.2
• /
• pp.194-203
• /
• 1998

In this paper, a new DCT-VQ method is proposed which can solve the problems of VQ such as the degradation of edge and enormous calculations. VQ is carried in DCT domain but spatial domain in order to protect the degradation of edge. DCT makes high correlated image data decorrelated and the energy concentrated on a few coefficients. In DCT domain, the DC coefficient is quantized with 8 bits uniform scalar quantizer and the AC coefficients are divided to three regions and coded with vector qiantizer for considering edge components. For the decrease of the calculation and memory, the vectors for three region have small dimension of $1{\times}7$ and use the same codebook. Thus, the proposed method can fully express the edge components by considering AC coefficients in DCT domain and decrease the calculation and memory be reducing the dimension of vectors.

• Journal of Broadcast Engineering
• /
• v.4 no.2
• /
• pp.155-163
• /
• 1999

In this paper, we propose novel scene change detection and key frame selection techniques, which use two feature images, i.e., DC and edge images, extracted directly from MPEG compressed video. For fast edge image extraction. we suggest to utilize 5 lower AC coefficients of each DCT. Based on this scheme, we present another edge image extraction technique using AC prediction. Although the former is superior to the latter in terms of visual quality, both methods all can extract important edge features well. Simulation results indicate that scene changes such as cut. fades, and dissolves can be correctly detected by using the edge energy diagram obtained from edge images and histograms from DC images. In addition. we find that our edge images are comparable to those obtained in the spatial domain while keeping much lower computational cost. And based on HVS, a key frame of each scene can also be selected. In comparison with an existing method using optical flow. our scheme can select semantic key frames because we only use the above edge and DC images.