• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2008.06a
• /
• pp.254-259
• /
• 2008

지형의 표고값물 격자간격으로 표현하는 수치표고모델(DEM)은 지형분석을 위한 GIS데이터 활용과 휴대전화 중계안테나의 영향권 분석, 정밀지오이드 계산을 위한 지형효과계산 등 여러 가지 분야에 활용되고 있다. 본 연구에서는 이렇게 활용성이 증가하고 있는 수치표고모델을 수집하고 또 진주시 지역을 대상으로 LiDAR촬영을 통한 LiDAR 수치표고모델을 구축하여 그 정확도를 분석하고자 하였다. 연구에 활용된 수치표고모델은 GTOPO30, SRTM-3, 지형도(1/50,000) 독취 DEM, 환경부 DEM, 항공사진에 의해 생성된 DEM, 그리고 LiDAR DEM의 6가지이며, 정확도 분석을 위해 GPS측량과 수준측량이 동시에 실시된 409점의 진주시 3차원 도시기준점 성과를 이용하였다.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2002.05c
• /
• pp.336-341
• /
• 2002

본 연구에서는 엔트로피 최적화를 위한 목적함수의 근을 구하기 위해 단순히 함수 값만을 이용하여 계산을 근사화한 할선법에 기초한 고정점 알고리즘의 독립성분분석 기법을 제안하였다. 이렇게 하면 기존의 뉴우턴법에 기초한 고정점 알고리즘에서 요구되는 복잡한 도함수의 계산과정을 간략화 할 수 있어 더 우수한 학습성능의 독립성분분석이 가능하다. 제안된 학습알고리즘의 독립성분분석 기법을 512$\times$512의 픽셀을 가지는 10개의 영상을 대상으로 임의의 혼합행렬에 따라 발생되는 혼합영상들을 실험하였다. 실험결과, 기존의 뉴우턴법에 기초한 고정점 알고리즘의 분석기법보다 빠른 학습속도와 개선된 분리성능이 있음을 확인하였다. 특히 기존의 알고리즘에서 임의로 설정되는 초기값에 덜 의존하는 학습성능이 있음도 확인할 수 있었다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2002.10c
• /
• pp.16-18
• /
• 2002

다차원 데이터를 온라인으로 분석하기 위해서는 사전에 집계 테이블들을 계산해 둔다. 대용량 고차원 데이터의 경우는 집계 테이블의 분량이 천문학적으로 방대하기 때문에 사전 집계 계산이 현실적으로 불가능한 경우가 많다. 고차원 데이터 처리에 관한 연구로는 데이터의 차원 수를 감소시키거나 인덱스를 압축하여 질의처리 시간을 단축하려는 연구를 들 수 있는데, 이러한 방법들은 고차원 데이터의 온라인 분석시에 발생하는 데이터 폭발 현상을 근본적으로 해결하지는 못한다. 본 연구에서는 고차원 데이터가 분석될 때 실제로 저차원 집계 테이블들이 주로 사용된다는 점에 착안하여 데이터 폭발 현상을 감소시키면서 데이터를 분석하는 방안을 제시한다 이 방법은 사전 집계 연산을 할 때 크기가 방대한 고차원 집계 테이블들의 생성을 생략하고, 3-6차원 또는 그 이하 차원의 집계 테이블들만을 고속으로 동시에 생성하는 방법이다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.10
• /
• pp.93-101
• /
• 2004

A method to calculate stability limits is investigated to predict the characteristics of high-frequency combustion instability in liquid-propellant rocket engine. It is based on the theory of linear stability analysis proposed in previous works and useful to predict combustion stability at the beginning stage of engine development. The system of equations governing reactive flow in combustor has the simplified and linearized forms. The overall equation expressing stability limits is adopted. The procedures to evaluate quantitatively each term included in the equation are proposed. The thermo-chemical properties and flow variables required in the evaluation can be obtained from calculation of thermodynamic equilibrium, CFD results, and experimental test data. Based on the existent data, stability limits are calculated with actual rocket engine (KSR-III rocket engine). The present calculations show the reasonable stability limits in a quantitative manner and the stability characteristics of the engine are discussed. The prediction from linear stability analysis could be serve as the first approximation to the true prediction.

• Journal of the Korean School Mathematics Society
• /
• v.12 no.3
• /
• pp.347-364
• /
• 2009

In this paper, the researchers investigated the influence of graphing calculator in learning the concept of linear function for the gifted students. Elementary students who were taking a course in enrichment mathematics at Science Education Institute for the Gifted in Mokpo National University were selected for this study. The researchers analyzed students' processes of mathematical inference and conjecture, and students' algebraic description. We found the facts that the visualization using a graphing calculator and CBL is helpful to the gifted students in understanding concepts of liner function, finding the relationship between variables, analyzing and presupposing of graph. But, using graphing calculator can be a factor that disturbs learning of students who have too much of curiosity on graphing calculator.

• The Journal of Korean Association of Computer Education
• /
• v.16 no.6
• /
• pp.45-54
• /
• 2013

Computational thinking has been a powerful key recently to open a new paradigm era in the curriculum of Informatics subject and the community of computer science education. But the quality and quantity of domestic research about it has been very poor in comparison with other countries. Therefore, this study focuses on the definition, learning steps and learning contexts about computational thinking education using some professional questionnaires and analyses of related other countries' literatures. The learning contexts that were extracted by several previous works could be used as the factor to analyze the curriculum of Informatics subject and textbooks in middle school; these could be helpful to teach the ability of computational thinking in middle school. Results of these questionnaires show that the three steps and 13 learning contexts of computational thinking education are properly well-formulated. The 5 of 13 learning contexts, such as data collection, are missing in 2009 revised-Informatics curriculum in middle school as well as the seven Informatics textbooks that used in middle school contained 10 of 13 learning contexts for computational thinking education.

• Current Research on Agriculture and Life Sciences
• /
• v.31 no.1
• /
• pp.38-44
• /
• 2013

To estimate the radiative heat loss from greenhouses, a new equation for calculating the sky temperature is presented. The sky temperature in the Daegu region was measured using a pyrgeometer and calculated using different equations according to the cloudiness. The calculated and measured results were then compared to identify the best equation for calculating the sky temperature. The difference value between the air and sky temperature was dissimilar and increased as the cloud amount decreased. On clear days the difference value was 10~20 times greater than that on cloudy and rainy days. When analyzing the correlationship between the calculated and measured sky temperatures on clear days, Bliss's and Clark & Allen's equations were found to be superior to the other equations. However, on cloudy days, the best correlationship between the calculated and measured sky temperatures was exhibited by Fuentes's equation. Therefore, a new equation is proposed for calculating the sky temperature on a cloudy day.

• Nuclear Engineering and Technology
• /
• v.18 no.1
• /
• pp.17-26
• /
• 1986

A test is made for a method to determine reliable bias in the criticality safety analysis of spent fuel storage pool with turnup credit between the reference and rack criticality calculation methods. The spent fuel pool of Kori Unit 1 is conceptually redesigned to the most compact rack with turnup credit, and its multiplication factors are calculated depending on fuel enrichment and burnup, by the Monte Carlo code KENO-IV as a reference and by a two-dimensional collision probability code FATAC as a practical method. Then, the computed values with the help of the above two computer codes are compared to evaluate the bias and its trend in terms of multiplication factor on fuel enrichment and turnup. The result indicates that the bias can be determined with reliability basis but without any disadvantage in criticality safety margin compared with the conventional method.

• The Journal of the Korea Contents Association
• /
• v.16 no.12
• /
• pp.1-9
• /
• 2016

Computational Fluid Dynamics(CFD) is a branch of fluid mechanics that solves partial differential equations which represent fluid flows by a set of algebraic equations using computers. Even though it requires multifarious variables, only selected ones are stored because of the lack of storage capacity. It causes the requirement of secondary variable calculations at analyzing time. In this paper, we suggest an efficient method to estimate optimal calculation paths for secondary variables. First, we suggest a converting technique from a dependency graph to a ordinary directed graph. We also suggest a technique to find the shortest path from any initial variables to target variables. We applied our method to a tool for data analysis and visualization to evaluate the efficiency of the proposed method.

• Journal of KIISE:Databases
• /
• v.28 no.3
• /
• pp.430-448
• /
• 2001

In navigation system, a primary task is to compute the minimum cost route from the current location to the destination. One of major problems for navigation systems is that a significant amount of computation time is required when the digital road map is large. Since navigation systems are real time systems, it is critical that the path be computed while satisfying a time constraint. In this paper, we have developed a HiTi(Hierarchical MulTi) graph model for hierarchically structuring large digital road maps to speedup the minimum cost path computation. We propose a new shortest path algorithm named SPAH, which utilizes HiTi graph model of a digital road map for its computation. We prove that the shortest path computed by SPAH is the optimal. Our performance analysis of SPAH also showed that it significantly reduces the computation time over exiting methods. We present an in-depth experimental analysis of HiTi graph method by comparing it with other similar works.