• Journal of the Korean Applied Science and Technology
• /
• v.35 no.3
• /
• pp.579-586
• /
• 2018

In this study, surfactants were synthesized using fatty alcohols of 8, 10, 12 and 14 carbon chains length. The structures of the synthesized surfactants was confirmed by FT-IR and $^1H$-NMR analysis. The surface tension of the diluted surfactant was measured as 26~32 mN/m depending on the carbon length and the critical micelle concentration was measured as $10^{-3}{\sim}10^{-5}mol/L$.The minimum value per molecule of the synthesized sulfonic acid surfactant is 1.68 to $1.30nm^2$. The physical properties of the synthesized surfactants were determined by measuring the critical micelle concentration, foaming power, emulsifying stability, and contact angle.

• Applied Chemistry for Engineering
• /
• v.30 no.1
• /
• pp.102-107
• /
• 2019

Anionic surfactants were synthesized by using an sarcosine, taurine and fatty alcohol with varying the carbon chain length. The structure of synthesized surfactants was confirmed by $^1H$ NMR analysis. The critical micelle concentration of the synthetic anionic surfactant was $10^{-2}{\sim}10^{-4}mol/L$ and the surface tension value at the critical micelle concentration was between 21 and 39 mN/m. It was confirmed by the Ross-Miles method that the synthetic surfactant with the carbon chain of 12 showed a good foaming power and stability. In addition, the surfactant using the sacosine was found to have a good affinity in soybean oil while that using taurine in benzene. The physical properties of synthesized surfactants were determined by measuring the critical micelle concentration, foaming power and emulsifying stability.

• Applied Chemistry for Engineering
• /
• v.20 no.1
• /
• pp.9-14
• /
• 2009

A zwitterionic surfactant shows not only detergency but also softening effect since it shows characteristics of a nonionic or an anionic surfactant above an isoelectric point, while showing characteristics of a cationic surfactant below an isoelectric point. Therefore, a zwitterionic surfactant can serve as a dual function surfactant by a single molecule through the interconversion of cleaning and softening effects depending on pH of the aqueous solution. In this study, the dual function characteristics of an amine oxide zwitterionic surfactant were investigated by measuring the zeta potential and the isoelectric point using quartz crystal microbalance (QCM). In addition, the physical properties of an amine oxide surfactant such as critical micelle concentration, surface tension, interfacial tension, contact angle and viscosity were measured and phase behavior study was also performed. The isoelectric point of an amine oxide surfactant determined by zeta potential measurement was near 7.35 and that obtained by QCM experiment was about 7.4, where both results were found to be close to the value reported in the literature.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.110-110
• /
• 2015

표면에너지는 계면특성을 지배하는 핵심인자로 디스플레이의 터치 스크린 패널 공정, 이종소재의 접합, 금속의 클래딩 등 실제 산업에 있어서 매우 중요하다. 표면에너지는 코팅과 본딩 이론에 있어서 기본이 되는 물리량으로 표면에너지가 높을수록 코팅 또는 박막 증착시 코팅, 증착이 용이하며 이종소재의 접합도 쉽게 일어난다. 본 연구에서는 플라즈마 표면처리시 산소 분율의 변화에 따른 기판의 표면에너지와 코팅층과 기판의 부착력의 변화에 대해 연구하였다. 연구의 주요 기판으로 ITO, PET 기판을 사용하였고, 표면 에너지 변화를 확인하기 위해 기판을 상온 상압 플라즈마에 노출시켰다. 플라즈마는 아르곤(Ar)의 공급량을 20 LPM으로 고정하고 산소($O_2$)의 공급량을 0 sccm에서 40 sccm 까지 10 sccm 간격으로 변수를 주었다. 표면에너지 값은 기판 위에 형성된 액체의 접촉각을 통해 도출하였다. 표면에너지 측정 액체로 증류수(deionized water)와 디오도메탄(diiodo-methane)을 사용하였다. 표면에너지는 산소분압이 10 sccm에서 최대값인 76 mJ/m2으로 증가한 후 20 sccm까지 유지하다 다시 직선적으로 감소하였다. 기판에 증착된 크롬 박막의 부착력은 스크래치 테스트를 통해 측정하였다. 표면에너지의 증가와 비례하게 부착력은 증가하였고 표면에너지가 감소하는 범위에서는 부착력도 감소하였다. 기판과 코팅층의 부착력 증가 원인 중 하나인 계면 산화물 층의 생성 여부를 알아보기 위해 auger electron spectroscopy (AES) 분석을 진행하였다. AES 분석을 통해 플라즈마 표면처리시 기판과 코팅층의 계면 산화물층의 두께가 표면에너지의 변화와 비례하게 증가하였다가 감소하는 것을 확인하였다. 산소분압이 10 sccm 이었을 경우 산화물층의 두께가 가장 두꺼웠다. 또한 계면의 화학적 결합 상태를 알아보기 위해 X-ray photoelectron spectroscopy (XPS) 분석을 진행하였으며 산소 분율의 변화에 따라 크롬 산화물의 양이 증가하였다 감소하는것을 확인하였다. 이 연구를 통해 산소를 포함한 플라즈마 표면개질이 기판과 코팅층의 부착력 증가에 영향을 끼침을 확인 할 수 있었다. 또한 이를 응용하여 부착력 증가가 필요한 다양한 분야에서도 쉽게 적용시킬 수 있을 것이다.

• Applied Chemistry for Engineering
• /
• v.5 no.3
• /
• pp.457-465
• /
• 1994

Interfacial tension between liquid soil and aqueous solution of surfactant can be obtained from theoretical and/or experimental data. A correlation factor(r) between work(Wac) from theotical interfacial tension and detergency was 0.93 at lower concentration(0.04%) and 0.37 at higher concentration(0.1%) but a correlation factor(r) from experimental data(Wae) was 0.95 and 0.84, respectively. There were, therefore, good correlation between adhesional work and detergency at lower concentration but large deviation between them from theoretical and experimental one at higher concentration.

• Korean Chemical Engineering Research
• /
• v.46 no.2
• /
• pp.227-232
• /
• 2008

In this research, organic extracts from roots of platycodon grandiflorum was tested to see the possibility for cosmetic natural surfactant. Interfacial properties of extracts of Platycodon grandiflorum was checked for interfacial tension, forming force, dispersion force, emulsion force, emulsion activity, and emulsion stability. At 0.005 wt% concentration, the interfacial tension against the caster oil was 11.5 dyn/cm which was lower than that of Tween 40 and quillaja bark. Extracts of Platycodon grandiflorum showed excellent emulsification activity and stability for cosmetic oils such as olive oil, soybean oil, and canola oil. In patch test using 2-5% of the extract and glycerin, the extract showed mild skin irritation. From the experiment, the extracts of platycodon grandiflorum root showed good interfacial properties as a cosmetic agent with minor skin irritation.

• Composites Research
• /
• v.31 no.6
• /
• pp.299-303
• /
• 2018

In order to improve the interfacial bonding force and reaction polymerization degree of the carbon fiber reinforced nylon 6 composite material, the surface of the existing epoxy-sizing carbon fiber was desized to remove the epoxy and treated with urethane, nylon and phenoxy sizing agent, was observed. The interfacial bond strength of the resized carbon fiber was confirmed by IFSS (Interfacial Shear Strength) and the fracture surface was observed by scanning electron microscope. The results showed that the interfacial bonding strength of the carbon fiber treated with nylon and phenoxy sizing agents was higher than that of urethane - based sizing. It has been found that the urethane - type resizing carbon fiber has lower interfacial bonding strength than the conventional epoxy - sizing carbon fiber. This result shows that the interfacial bonding between carbon fiber and nylon 6 is improved by removing low activity and smoothness of existing carbon fiber.

• Journal of Adhesion and Interface
• /
• v.13 no.4
• /
• pp.182-187
• /
• 2012

In making emulsion-type pressure sensitive adhesive (PSA), environmentally friendly sorbitan nonionic surfactants having various chemical structures were prepared and used to find out the possibility of substituting the traditional nonyl-phenyl nonionic surfactant (NPE40) by comparing their adhesive properties. Results exhibited that the PSA used NSR10-series and Tween 60 showed better adhesive properties in initial ball tack, peel strength and holding power than those of NPE40. The reason for this is their particular chemical structure and the proper ratio of hydrophobic groups to the ethylene oxide groups.

• 전기의세계
• /
• v.36 no.8
• /
• pp.578-581
• /
• 1987

본고의 내용은 다음과 같다. 1. Potential의 정의 2. 계면전압 3. 내부전압 4. 산소 센서

• Journal of Adhesion and Interface
• /
• v.16 no.1
• /
• pp.1-5
• /
• 2015