• 제목/요약/키워드: 경화깊이

검색결과 124건 처리시간 0.025초

광조형법에 있어서 조형정도향상을 위한 연구 (The Study on Improvement of Shape Accuracy in Stereolithography)

  • 김준안;백인환
    • 한국정밀공학회지
    • /
    • 제14권5호
    • /
    • pp.15-21
    • /
    • 1997
  • In the stereolithography process, the accuracy of cured shape depends on laser power, scanning speed, scanning pattern, resin characteristics etc. When three-dimensional objects are built, higher laser power gives higher building efficiency. Normally we could control scanning speed and scanning pattern, which affect curing thickness and generate volume of curl in & after building. Olgomer, Monomer and Initiator are major components. Kinds and volume of them decide characteristic of resin. In this paper, we deal with major facts and their characteristics for precision shape building.

  • PDF

탄소 표면경화처리 구름베어링의 유효 경화 깊이에 대한 고찰 (Study on Effective Case Depth for Case Hardened Rolling Bearings)

  • 이한영
    • Tribology and Lubricants
    • /
    • 제32권1호
    • /
    • pp.18-23
    • /
    • 2016
  • The effective case depth for case-hardened rolling bearing has been discussed. For this purpose, rolling contact fatigue tests for ball bearings built with inner race of various hardness values were conducted until L10 calculating rating life using a bearing life test machine under radial loading. Then, the distribution of residual stress below the inner raceway, which depended on the hardness value, was measured by X-ray diffraction. As a result, the linear relationship was established between the hardness value of the inner race and the theoretical shear stress evaluated at the depth where the residual stress disappeared below the inner raceway. Based on the relationship, it could be found that the factor of safety in bearing manufacturer’s rules for the effective case depth of case hardened rolling bearings was set higher. However, it could be also found that the hardness values at the depth where the maximum shearing stress acted below the raceway surface in a tapered roller bearing hardened by the carburizing process, were not sufficient for preventing plastic deformation under the basic dynamic load rating. Consequently, further efforts were still required to reduce or to disperse the contact load on the material design of a rolling bearing in order to prolong its life.

고주파표면경화한 SM45C 강에서 유교경화층깊이가 피로거동에 미치는 영향 (A Study on Fatigue Behavior according to Effective Case Depth in Induction Case Hardened SM45C Steel)

  • 오세욱;호정원;박원조
    • 한국해양공학회지
    • /
    • 제5권1호
    • /
    • pp.71-80
    • /
    • 1991
  • This paper reveals the effect of the effective case depth(ECD) on the fatigue behavior of a high-frequency induction hardened SM45C in rotated bending fatigue test. In addition, the effects of fracture modes(surface origin type, inner origin type) on it are discussed. The fatigue limit of the induction hardened steel is remarkably increased compared with that of base metal. In addition, the fatigue limit is linearly increased as the effective casedepth grows deep in the region of this experiment (ECD/R;0.23-0.49). The S-N curve and fracture mode in the induction case hardened steel are classified into two kinds, as a result : N$_{f}$<10$^{5}$ ;surface origin type fracture(at high stress), N$_{f}$>10$^{5}$ ; in ner origin type fracture(at low stress). In case of inner origin type fracture; as the effective case depth(ECD) gets deep, the fatigue limit is increased by the reason that the fracture origin moves toward center; in reverse, is decreased by reason that the compressive residual stress gets low. As a result, the increasing effect of the former is much bigger than the decreasing effect of the latter, and the fatigue limit is increased as the ECD gets deep.eep.

  • PDF

High Power Diode Laser를 이용한 금형재료의 표면처리에 따른 재료의 물성 평가

  • 황현태;김종도;송현수;김영국;김종하
    • 한국재료학회:학술대회논문집
    • /
    • 한국재료학회 2009년도 춘계학술발표대회
    • /
    • pp.41.1-41.1
    • /
    • 2009
  • 최근 금형은 자동차뿐만 아니라 여러 산업에서 필수적이며 제품의 품질은 물론 제조원가에 막대한 영향을 미친다. 이러한 금형은 침탄, 질화, 고주파담금질등에 의해 표면처리 되어져 왔으나, 이와 같이 기존의 처리 방법은 모두 처리물 전체를 가열하거나 균일한 가열을 하지 못하기 때문에 변형의 문제와 처리후의 후가공의 경비 문제, 그리고 극히 일부분만 경화가 필요한 부품에는 적용하기 어려운 문제점이 있다. 이러한 문제를 해결할 수 있는 표면처리로서 레이저 표면처리 방법이 대두되고 있으며, 레이저 표면처리는 레이저 빔을 피처리물의 표면에 조사하고 적당한 속도로 이동을 하게 되면 레이저조사부위가 급속하게 가열되고 레이저빔이 통과한 후에는 표면의 열이 내부로 열전도 되어 급속히 자기냉각(Self-quenching)됨으로서 표면에 새로운 기계적 성질을 갖게 하는 표면처리법이다. 이와 같이 레이저를 이용한 표면처리로 기존의 CW Nd:YAG 레이저 열원보다 효율이 좋은 HPDL(High Power Diode Laser)를 이용한 고효율, 고기능 금형 표면처리 후 재료적 물성을 평가하고자 한다. 평가방법은 레이저빔의 조사속도 및 온도변화에 따른 표면처리부, 열영향부 그리고 모재 부분에 대한 경도특성 및 미세조직 변화를 관찰하였다. 또한 조사속도 및 온도변화에 대해 경화깊이를 관찰하였다.

  • PDF

실시간 출력 제어를 통한 구상흑연 주철의 레이저 표면경화 특성 (Characteristics of Surface Hardening by Laser Power Control in Real Time of Spheroidal Graphite Cast Iron)

  • 김종도;송무근
    • 한국레이저가공학회지
    • /
    • 제18권2호
    • /
    • pp.1-4
    • /
    • 2015
  • This study is related to the surface hardening treatment to spheroidal graphite cast iron for die by using high power diode laser. Laser device used in this experiment is capable of real-time laser power control. This is because the infrared temperature sensor (two color pyrometer) attached to the optical system measures the surface temperature of specimen and adjusts the laser power in real time. The surface treatment was carried out with the change of heat treatment temperature at the beam travel speed 3 mm/sec. Hardened width and depth was measured and hardened zone was analyzed by micro vickers hardness test in order to research the optimum condition of heat treatment. The changes in microstructure of the hardened zone also was examined. As a result of hardness measurement and observations on microstructure of hardened zone, hardness increased over three times as compared with base metal because the martensite was formed on the matrix structure.

치주염이 동맥경화에 기여하는 기전에 관한 연구 (Mechanism by which periodontitis may contribute to atherosclerosis)

  • 한승희;김경화;양승민;정현주;최윤식;한수부;정종평;류인철
    • Journal of Periodontal and Implant Science
    • /
    • 제32권4호
    • /
    • pp.837-846
    • /
    • 2002
  • 그람 음성균의 감염에 의한 만성 염증질환인 치주염이 동맥경화를 동반한 허혈성 심장질환 (협심증이나 심근 경색)을 일으킬 수 있는 위험인자로 작용할 수 있다는 보고가 있었다. 그러나, 그 기전에 관해서는 명확하게 알려져 있지 않다. 작용기전의 하나로서, 치주염에 의해 치주조직에서 국소적으로 생긴 염증성 싸이토카인(IL-1${\beta}$, IL-6, $PGE_2$, TNF-${\alpha}$)이 혈행을 따라 이동하여 심혈관에서 동맥경화를 일으킬 수 있다는 가설이 제시되고 있는데, 이 가설을 검증해 보고자 한다. 서울대학교 병원 순환기 내과에 불안정 협심증이나 심근경색으로 입원한 환자 및 과거 이 질환의 병력을 갖고 있거나 검진 목적으로 내원하여 관상동맥 조형술을 받은 환자들 중 동맥경화로 진단받은 사람을 실험군(24명)으로 하고, 동맥경화로 진단받지 않은 사람을 대조군(12명)으로 하였다. 치주질환의 활성도를 나타내는 치은 지수, 치태 지수, 치주낭 깊이, 부착 상실을 측정하였다. Paper strip을 실험대상 치아(Ramfjord's teeth)들 중에서 가장 깊은 치주낭을 가진 두 개의 치아를 택하여 각 치아의 가장 깊은 치주낭에 30초간 삽입한 후 밀폐된 plastic tube에 넣고 ELISA kit를 이용하여 IL-1${\beta}$, IL-6, TNF-${\alpha}$, $PGE_2$의 농도를 측정하였다. 환자의 plasma에서도 동일한 싸이토카인의 농도를 측정하였다. 설문조사를 통해 동맥경화의 위험 인자로 간주되어온 고혈압, 당뇨, 가족력, 심근경색이나 협심증의 기왕력, 흡연의 유무를 기록하였다. 혈액검사를 하여 total cholesterol, triglycerides, LDL cholesterol, HDL cholesterol, WBC, CRP (C-reactive protein)의 농도를 측정하였다. 치주조직에 대한 임상 검사 결과 치은의 염증상태를 나타나는 지표인 치은 지수에서만 실험군이 대조군에 비해 유의할 정도 (p=0.0174)로 높게 나타났고, 만성적인 염증의 결과로 인한 치조골의 사실 정도를 나타내는 치주낭 깊이나 부착 상실에서는 유의할 만한 차이를 보이지 않았다. 치주낭에서 측정한 염증성 싸이토카인 중 IL-1${\beta}$, $PGE_2$가 실험군에서 유의할 만한 차이 (p=0.005, 0.022)를 보이며, 더 높은 농도로 나타났고, TNF-${\alpha}$는 대조군에서 유의성 있게 (p=0.009) 높게 나타났다. 그러나, plasma의 싸이토카인이나, serum lipid/lipoprotein, C-reactive Protein, WBC는 유의할 만한 차이를 보이지 않았다. 또한 치은열구액내의 싸이토카인과 이에 상흥하는 싸이토카인 간에 상관관계는 관찰되지 않았다. 다변량 로지스틱 회귀분석 결과, 치은열구액내의 IL-1${\beta}$와 TNF-${\alpha}$ 만이 동맥경화와 유의성 있는 관련성을 보였고, 특히 IL-1${\beta}$와 교차비는 273으로 상당한 관련성을 보여주었다. 결론적으로, 치주조직에서 국소적으로 생긴 염증성 싸이토카인이 그대로 혈행으로 이동하여 혈장내의 싸이토카인 농도를 높이는 것은 아니다. 그러나, 치주염으로 인해 치은열구내액내에 국소적으로 증가된 염증성 싸이토카인은 동맥경화와 상당한 관련성을 가진다.

DP강 표면하 subsurface zone의 수소취화거동 (Behavior of Hydrogen Embrittlement of Subsurface Zone in DP Steel)

  • 강계명;박재우
    • 한국표면공학회:학술대회논문집
    • /
    • 한국표면공학회 2011년도 춘계학술대회 및 Fine pattern PCB 표면 처리 기술 워크샵
    • /
    • pp.193-195
    • /
    • 2011
  • 강판재 사용에 있어 수소취성현상은 강판재가 고강도화됨에 따라 그 감수성이 커지는 것으로 알려져 있다. 특히 노출강판재의 경우, 표면으로부터 침투해 들어가는 수소에 의한 수소취화 거동에 대한 연구가 필요하다. 본 연구에서는 고강도 DP강을 시험편으로 하여, 음극전기분해법에 의해 수소를 강제주입시킨 후, DP강 표면하 subsurface zone의 수소취화 거동을 평가하고자 하였다. 미소경도분포 측정결과, 수소주입시간이 증가함에 따라 표면하 subsurface zone의 경도 또한 증가하는 것으로 조사되었다. 이는 수소에 의해 표면하 subsurface zone의 경화가 일어나 DP강의 기계적 특성에 영향을 미친것으로 판단된다. 미소경도분포의 측정결과와 미세조직 관찰결과로부터 수소임계침투깊이를 평가하였고, 이를 통해 DP강내 수소확산에 의한 수소임계침투깊이가 존재함을 확인할 수 있었다.

  • PDF

경화제를 첨가하지 않은 에폭시 시멘트 모르타르의 내후성 (Weatherability of Epoxy Cement Mortars without Hardener)

  • 조영국
    • 콘크리트학회논문집
    • /
    • 제18권6호
    • /
    • pp.801-809
    • /
    • 2006
  • 기존의 에폭시 수지는 많은 우수한 성질을 갖고 있음에도 불구하고, 주제와 경화제의 2성분 혼합의 복잡성, 높은 폴리머 시멘트비에 따른 경제성 등이 사용성을 제약하고 있다. 여기에서 저자들은 에폭시 수지가 경화제를 첨가하지 않아도 시멘트 모르타르의 수화에 의해 생성되는 알카리 성분에 의해 경화할 수 있다는 것을 알아냈다. 본 연구는 기존의 경화제 무첨가 에폭시 시멘트 모르타르의 연구 결과를 기초로 하여 1년간 실내외에 노출하여 내후성을 평가하였다. 다양한 폴리머 시멘트비로 만든 에폭시 시멘트 모르타르를 제작하여, 노출기간 28일, 6개월, 1년에 대한 중량변화율, 휨강도 및 압축강도, 흡수율, 중성화 깊이를 측정하였으며, 세공입경 분포와 내부 미세조직 구조 등을 관찰하였다. 시험 결과, 경화제를 첨가하지 않아도 에폭시 시멘트 모르타르의 내후성은 기존의 경화제를 첨가한 경우에 비해 역학적 성질 및 내구성 면에서 동등 이상으로 우수하였으며, 이상적인 경화제 무첨가 에폭시 시멘트 모르타르의 폴리머 시멘트비는 10% 또는 20%로 제안할 수 있었다.

YAG 레이저에 의한 공구강의 표면경화 깊이에 관한 연구 (A Study on the Case Hardning Depth of Tool Steel by YAG LASER)

  • 옥철호
    • 한국공작기계학회:학술대회논문집
    • /
    • 한국공작기계학회 1998년도 춘계학술대회 논문집
    • /
    • pp.53-58
    • /
    • 1998
  • Case hardening of tool steel(SK5) was investigated after YAG laser irradiation. In the case of beam passes, martensite formed in the melt zone and in former pearlite regions of the austenization zone exhibited very high Vickers Hardness values. The molten depth and radius, micro structure, hardness were investigated as a function of defocusing distance, pulse width, and power density.

  • PDF

저하중용 후설치 세트앵커의 전단파괴거동에 관한 매개변수 연구 (A Parameter Study on the Shear Failure Behavior of Post-installed Set Anchor for Light Load)

  • 엄찬희;유승운
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제19권3호
    • /
    • pp.55-63
    • /
    • 2015
  • 콘크리트용 후설치 세트앵커는 콘크리트가 경화된 후에 설치되는 앵커이며 시공 장비의 발달과 시공의 유연성 및 용이성으로 사용량이 증가하고 있는 실정이다. 전단하중을 받는 앵커는 강재 파괴, 콘크리트 파열파괴, 콘크리트 프라이아웃 파괴 등의 대표적인 파괴모드를 보인다. 본 연구에서는 매입깊이, 연단거리 및 콘크리트 강도를 변수로 한 세트앵커의 실험 및 유한요소 해석 결과를 통하여 콘크리트에 매입된 저하중용 후설치 세트앵커의 전단 파괴거동에 미치는 영향을 규명하는 것을 그 목적으로 한다. 매입깊이 변수의 실험 결과 매입깊이가 얕을수록 콘크리트 강도의 영향이 큰 것으로 나타났다. 연단거리 변수의 실험 결과 동일한 파괴모드를 보이면서 콘크리트 강도의 영향이 크지 않은 것으로 나타났다. 강재 파괴가 발생한 실험 결과를 비교해 보았을 때 콘크리트 강도가 클수록 변위가 상대적으로 더 작게 나타났다.