• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.300-300
• /
• 2013

세계전자제품의 부품산업은 21세기 정보화 사회와 함께 IT 산업에서 급성장으로 인해 부품의 소형화, 경량화, 친환경화가 요구되고 있다. IT 산업에서 리드스크류(Leadsrew)는 마이크로 구동부품중의 이송장치를 구성하는 핵심 부품으로 탄소강과 합금강 및 스테인레스강 등이 사용되고 있다. 탄소강은 성형 가공성과 원가 절감에 최적의 소재로서 낮은 표면 경도로 인한 내마모성 저하와 부식 분위기에서의 내식성이 떨어지는 단점을 가지고 있다. 본 연구에서는 탄소강(S20C:${\oint}30{\times}h10$)을 이용하여 플라즈마 질화 표면처리를 통해 표면경도와 내마모성 향상 및 내식성을 높이는 연구를 수행하였다. 연구 방법으로 플라즈마 연질화 공정과 Post Oxidation 공정을 개발하였고, 질화 처리된 시험편에 대해 마이크로 비커스 경도, OEM&SEM, XRD 분석 및 염수분무(KS D 9502) 시험으로 특성을 분석하였다. 연구 결과로 탄소강(S20C)은 마이크로 비커스 경도 분석으로 표면 경도가 600Hv0.025 이상과 염수분무 시험으로 내식성은 24시간 이상의 결과를 얻었다.

• Magazine of the Korea Concrete Institute
• /
• v.6 no.6
• /
• pp.151-158
• /
• 1994

In this work, in order to inrprove the flexural strength of hardened portlarid cerncrit paste, mix ing water was reduced to water ccrnent ratio of 0.1 aid water soluble polymer such as hydroxy propyl methyl cellulose was adclelri to the paste to obtain a better dispersion. The paste was kneaded by the twin roll mill for cornpact and homogeneous mixing. The high strength mechanism of the hardened cement paste may be due to the removal of macropores larger than 100${\mu}m$, the reduction of capillary pores acting as the passage of crack propagation, the increase of Young's moculus with iticrease of unhytlratcci cenxxnt ard the incicasc of fracture toughnevs with the crack toughening mechanism (grain bridging, polymer fibril bridging and fritional inter-locking).

• Proceedings of the Korean Society of Fisheries Technology Conference
• /
• 2001.10a
• /
• pp.341-342
• /
• 2001

이매패류의 아가미는 호흡기능과 함께 점액분비 및 섬모운동 등을 통하여 먹이의 포획, 수송, 소화 기능을 동시에 수행하며 (Beninger et al., 1988). 외부의 물리ㆍ화학적 자극에 빠르게 반응하는 중요한 외투강 기관계이다. 따라서 이매패류 아가미의 구조, 점액분비세포와 섬모운동의 특성은 서식생태와 섭이생태에 따라 다양하므로 이들 아가미에 관한 연구는 주로 다양한 측면의 환경변화 및 섭이생태와 연관하여 수행되어져 왔다. (중략)

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2008.11a
• /
• pp.138-138
• /
• 2008

H13강에 대해 이온질화에 대한 쇼트피닝의 효과를 살펴보았다. 쇼트피닝을 이온질화는 기존이온질화에 비해 높은 경도와 깊은 경화층을 얻을 수 있었다. 이는 쇼트피닝에 의해 결정립계와 전위밀도가 증가함에 따라 질화공정이 가속화된 것으로 보인다.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.41 no.3
• /
• pp.73-80
• /
• 1999

The objective of this study were to investigate the properties and to improve the disadvantages of the polymer concrete such as brittle fracture, large hardening shrinkage . In this paper, steel fiber reinforced polymer concrete is prepared with various steel fiber aspect ratios(ι/d), contents(vol.%), and their material characteristics were investigated experimentally . The aspect ration (ι/d) of the steel fiber was reversly proportional to slump value, and slump value tended to decrease as increase of steel fiber content . And harding shrinkage and impact resistance tended to be improved as the steel fiber content and aspect ration were increased.

• Journal of the Korean Society of Radiology
• /
• v.83 no.1
• /
• pp.70-83
• /
• 2022

Acute coronary syndrome (ACS) is mainly caused by atherosclerotic coronary artery disease (CAD); however, it can also occur in patients with non-atherosclerotic CAD. Conventional coronary angiography only shows the lumen of arteries, indicating the presence of stenosis or dilatation. Thus, it has limited value in evaluating the coronary artery wall and offers low specificity for diagnosing CAD. Coronary CT angiography provides additional information, including the depiction of the concerned vessel and the aorta, as well as the pulmonary artery, which permits the diagnosis of non-atherosclerotic CAD and the differentiation of various causes of the disease. In this review, we present the pathophysiology and CT imaging features of non-atherosclerotic CAD.

• Composites Research
• /
• v.31 no.4
• /
• pp.139-144
• /
• 2018

Long Fiber-reinforced composites have advantages of excellent production efficiency and formability of complex shapes compared to conventional continuous fiber reinforced composite materials. However, if we need to make complicated composite shapes or to assemble parts made of different materials, a variety of joining methods are needed. In general, long fiber prepreg sheet (LFPS) contains mold release agent to facilitate demolding after thermoforming. Therefore, mechanical fastening is required in addition to the adhesive bonding to get proper joining strength. In this study, we proposed a stainless steel insert for co-cure bonding which cures LFPS and bonds the stainless steel insert through thermoforming process. The wing of the insert which is spread during the thermoforming process induces adhesion and mechanical wedging effect and serves as a hook to resist the pulling force. The burn-out method was used to confirm the unfolded state of the stainless steel insert wings inserted into the composite material. The static pull-out test was performed to quantitatively evaluate the joining strength. From these experimental results, the condition which guarantees the most appropriate joining strength was derived.

• Journal of the Korea Concrete Institute
• /
• v.18 no.4 s.94
• /
• pp.449-458
• /
• 2006

The discharge of fly ash that is produced by coal-fired electric power plants is rapidly increasing in Korea. The utilization of fly ash in the raw materials would contribute to the elimination of an environmental problem and to the development of new high-performance materials. So it is needed to study the binder obtained by chemically activation of pozzolanic materials by means of a substitute for the cement. Fly ash consists of a glass phase. As it is produced from high temperature, it is a chemically stable material. Fly ash mostly consists of $SiO_2\;and\;Al_2O_3$, and it assumes the form of an oxide in the inside of fly ash. Because this reaction has not broken out by itself, it is need to supply it with additional $OH^-$ through alkali activators. Alkali activators were used for supplying it with additional $OH^-$. This paper concentrated on the strength development according to the kind of chemical activators, the curing temperature, the heat curing time. Also, according to scanning electron microscopy and X-Ray diffraction, the main reaction product in the alkali activated fly ash mortar is Zeolite of $Na_6-(AlO_2)_6-(SiO_2)_{10}-12H_2O$ type.

• Journal of Conservation Science
• /
• v.28 no.3
• /
• pp.265-276
• /
• 2012

Physicochemical properties of HBA epoxy resins were controlled by varying hardener mixture and reactive diluent to improve applicability for stone conservation. The epoxy risen comprises hydrogenated Bisphenol-A based epoxide (HBA), fast curing agent (FH), slow curing agent poly(propyleneglycol)bis(2- aminopropylether) (SH) and difunctional polyglycidyl epoxide (DPE). Talc was used as an inorganic additive. The changes in viscosity and temperature during curing reactions depending on the composition of the epoxy resins were investigated. Additionally, bending, tensile and adhesive strengths were measured to identify the effective mechanical strength in stone conservation. Finally various compositions of epoxy resin/inorganic additives were developed for stone conservation by controlling cure kinetics and mechanical properties.

• 대한한약신문
• /
• s.113
• /
• pp.1-12
• /
• 2006

한약재 취급관련 법원판결에 대한 건의/동대문 한의약박물관 13일 개관/서울약령시한의약문화축제 열려/이달 26일, 지부장 간담회 개최/서울대 의대 한의학 관련 강의 본격 실시/국립대에 한의학전문대학원 설치한다/지부탐방-지부장에게 듣는다/칼럼-한약과 음식물의 차이점/초석잠-동맥경화.뇌세포 활성화 등의 효험 있어/명칭이 비슷하여 감별하기 어려운 한약재/강의개괄내용-우선방합의 과신을 걸러내야/우리 약초를 찾아서-쪽/민간약선방